Nissan Versa Note. Manual - part 593

 

  Index      Nissan     Nissan Versa Note (2014 year) - Service and Repair Manual

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  591  592  593  594   ..

 

 

Nissan Versa Note. Manual - part 593

 

 

MWI

WASHER FLUID LEVEL SWITCH CIRCUIT

MWI-47

< DTC/CIRCUIT DIAGNOSIS >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

WASHER FLUID LEVEL SWITCH CIRCUIT

Description

INFOID:0000000009682041

Transmits the washer fluid level switch signal to the combination meter.

Diagnosis Procedure

INFOID:0000000009682042

Regarding Wiring Diagram information, refer to 

MWI-23, "Wiring Diagram"

.

1.

CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT

1. Turn ignition switch OFF.

2. Disconnect combination meter connector and washer fluid level switch connector.

3. Check continuity between combination meter harness connector M24 terminal 17 and washer fluid level

switch harness connector E50 terminal 1.

4. Check continuity between combination meter harness connector M24 terminal 17 and ground.

Is the inspection result normal? 

YES

>> GO TO 2.

NO

>> Repair or replace harness or connector.

2.

CHECK WASHER FLUID LEVEL SWITCH GROUND CIRCUIT

Check continuity between washer fluid level switch harness connector E50 terminal 2 and ground.

Is the inspection result normal? 

YES

>> Inspection End.

NO

>> Repair or replace harness or connector.

Component Inspection

INFOID:0000000009682043

1.

CHECK WASHER FLUID LEVEL SWITCH

Check continuity between washer fluid level switch terminals 1 and 2.

Is the inspection result normal?

YES

>> Inspection End.

NO

>> Replace washer fluid level switch. Refer to 

WW-64, "Removal and Installation"

.

Connector

Terminal

Connector

Terminal

Continuity

M24

17

E50

1

Yes

Connector

Terminal

Ground

Continuity

M24

17

No

Connector

Terminal

Ground

Continuity

E50

2

Yes

Terminal

Washer fluid level

Continuity

1 - 2

Low

Yes

High

No

MWI-48

< SYMPTOM DIAGNOSIS >

THE FUEL GAUGE INDICATOR DOES NOT OPERATE

SYMPTOM DIAGNOSIS

THE FUEL GAUGE INDICATOR DOES NOT OPERATE

Description

INFOID:0000000009654129

Fuel gauge will not indicate from a certain position.

Diagnosis Procedure

INFOID:0000000009654130

1.

CHECK COMBINATION METER INPUT SIGNAL

1. Select METER/M&A on CONSULT.

2. Using DATA MONITOR, compare the monitor value with the fuel gauge reading on the combination meter.

Refer to 

MWI-45, "Component Function Check"

.

Does monitor value match fuel gauge reading?

YES

>> GO TO 2.

NO

>> Replace combination meter. Refer to 

MWI-54, "Removal and Installation"

.

2.

CHECK FUEL LEVEL SENSOR SIGNAL CIRCUIT

Check the fuel level sensor signal circuit. Refer to 

MWI-45, "Diagnosis Procedure"

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair harness or connector.

3.

COMPONENT INSPECTION

Perform a component inspection on the fuel level sensor unit. Refer to 

MWI-46, "Component Inspection"

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Replace fuel level sensor unit. Refer to 

FL-6, "Removal and Installation"

.

4.

CHECK FLOAT INTERFERENCE

Check that the float arm does not interfere or bind with components in the fuel tank.
Is the inspection result normal?

YES

>> Replace combination meter. Refer to 

MWI-54, "Removal and Installation"

.

NO

>> Repair or replace malfunctioning parts.

MWI

THE OIL PRESSURE WARNING LAMP DOES NOT TURN ON

MWI-49

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

THE OIL PRESSURE WARNING LAMP DOES NOT TURN ON

Description

INFOID:0000000009654131

The engine oil pressure warning lamp stays off when the ignition switch is turned ON.

Diagnosis Procedure

INFOID:0000000009654132

1.

CHECK COMBINATION METER ENGINE OIL PRESSURE WARNING LIGHT

1. Select METER/M&A on CONSULT.

2. Observe OIL W/L DATA MONITOR while operating the ignition switch.

Is the inspection result normal?

YES

>> Inspection End.

NO

>> Replace combination meter. Refer to 

MWI-54, "Removal and Installation"

.

Component

Condition

CONSULT

Engine oil pressure warning light

Ignition ON

ON

Ignition OFF

OFF

MWI-50

< SYMPTOM DIAGNOSIS >

THE OIL PRESSURE WARNING LAMP DOES NOT TURN OFF

THE OIL PRESSURE WARNING LAMP DOES NOT TURN OFF

Description

INFOID:0000000009654133

The engine oil pressure warning lamp remains on while the engine is running (normal oil pressure).

Diagnosis Procedure

INFOID:0000000009654134

1.

CHECK COMBINATION METER INPUT SIGNAL

1. Start the engine and select METER/M&A on CONSULT.

2. Observe OIL W/L DATA MONITOR and the operation of the engine oil pressure warning lamp on the com-

bination meter.

Is the inspection result normal?

YES

>> Perform ECM self-diagnosis. Refer to 

EC-60, "CONSULT Function"

.

NO

>> Replace combination meter. Refer to 

MWI-54, "Removal and Installation"

.

Component

Condition

CONSULT

Engine oil pressure warning light

Engine running

OFF

 

 

 

 

 

 

 

Content   ..  591  592  593  594   ..