Nissan Rogue. Manual - part 618
B20CF HEADLAMP (HI) RH POWER SUPPLY CIRCUIT
EXL-101
< DTC/CIRCUIT DIAGNOSIS >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
B20CF HEADLAMP (HI) RH POWER SUPPLY CIRCUIT
DTC Logic
INFOID:0000000011280756
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF DIAGNOSTIC RESULT
With
CONSULT.
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result”.
Is DTC B20CF detected?
YES
>> Proceed to diagnosis procedure. Refer to
EXL-101, "Diagnosis Procedure"
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011280757
1.
CHECK HEAD LAMP SHORT CIRCUIT TO GROUND
1. Disconnect front combination lamp connector and IPDM E/R connector.
2. Check continuity between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness.
2.
CHECK HEAD LAMP SHORT CIRCUIT TO GROUND
1. Reconnect IPDM E/R connector.
2. Check continuity between front combination lamp harness connector and ground.
Is the inspection result normal?
YES
>> Refer to
GI-44, "Intermittent Incident"
.
NO
>> Replace IPDM E/R. Refer to
PCS-40, "Removal and Installation"
.
DTC
Display Item
Malfunction detected condition
Possible causes
B20CF
HL (HI) RH PWR SPLY CIRC
[CIRC SHORT TO GRND]
Short to ground
• IPDM E/R
• Short to ground
IPDM E/R
Ground
Continuity
Connector
Terminal
E217
54
No
Front combination lamp
Ground
Continuity
Connector
Terminal
RH
E234
15
No