|
|
MIR-16 < BASIC INSPECTION > DIAGNOSIS AND REPAIR WORK FLOW BASIC INSPECTION DIAGNOSIS AND REPAIR WORK FLOW Work Flow INFOID:0000000006046392 DETAILED FLOW 1. OBTAIN INFORMATION ABOUT SYMPTOM Interview the customer to obtain as much malfunction information (conditions and environment when the mal- >> GO TO 2. 2. REPRODUCE THE MALFUNCTION INFORMATION Check the malfunction on the vehicle that the customer describes. >> GO TO 3. 3. IDENTIFY THE MALFUNCTIONING SYSTEM WITH “SYMPTOM DIAGNOSIS” Use “Symptom diagnosis” from the symptom inspection result in step 2. Then identify where to start the diag- >> GO TO 4. 4. IDENTIFY MALFUNCTIONING PARTS WITH “COMPONENT DIAGNOSIS” Perform the diagnosis with “Component diagnosis” of the applicable system. >> GO TO 5. 5. REPAIR OR REPLACE THE MALFUNCTIONING PARTS Repair or replace the specified malfunctioning parts. >> GO TO 6. 6. FINAL CHECK Check that malfunctions are not reproduced when obtaining the malfunction information from the customer, Is the malfunctioning part repaired or replaced? YES >> Trouble diagnosis is completed. NO >> GO TO 3. |