Nissan Almera Tino V10. Manual - part 35
Nickel Metal Hydride Battery Replacement
NLGI0007S06
CONSULT-II contains a nickel metal hydride battery. When replac-
ing the battery obey the following:
WARNING:
Replace the nickel metal hydride battery with Genuine CON-
SULT-II battery only. Use of another battery may present a risk
of fire or explosion. The battery may present a fire or chemi-
cal burn hazard if mistreated. Do not recharge, disassemble or
dispose of in fire.
Keep the battery out of reach of children and discard used
battery conforming to the local regulations.
Checking Equipment
NLGI0007S07
When ordering the below equipment, contact your NISSAN
distributor.
Tool name
Description
NISSAN CONSULT-II
q
1
CONSULT-II unit (Tester internal soft:
Resident version 3.3.0) and accessories
q
2
Program card AED02E and AEN02C
(For NATS)
To confirm the best combination of these
softwares, refer to CONSULT-II Operation
Manual.
q
3
CONSULT-II CONVERTER
SAIA0362E
NOTE:
I
The CONSULT-II must be used in conjunction with a pro-
gram card.
CONSULT-II does not require loading (Initialization) proce-
dure.
I
Be sure the CONSULT-II is turned off before installing or
removing a program card.
CAUTION:
I
If CONSULT-II is used with no connection of CONSULT-II
CONVERTER, malfunctions might be detected in self-di-
agnosis depending on control unit which carry out CAN
communication.
I
If CONVERTER is not connected with CONSULT-II, vehicle
occur the “FAIL-SAFE MODE” which is “LIGHT UP the
HEADLIGHT” and/or “Cooling FAN ROTATING” when
CONSULT-II is started.
CONSULT-II CHECKING SYSTEM
Nickel Metal Hydride Battery Replacement
GI-36