|
|
DTC P1128 THROTTLE CONTROL MOTOR EC-435 C D E F G H I J K L M A EC Revision: 2005 August 2005 Murano Specification data are reference values and are measured between each terminal and ground. CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in dam- : Average voltage for pulse signal (Actual pulse signal can be confirmed by oscilloscope.) Diagnostic Procedure ABS004JQ 1. CHECK GROUND CONNECTIONS 1. Turn ignition switch OFF. 2. Loosen and retighten two ground screws on the body. OK or NG OK >> GO TO 2. NG >> Repair or replace ground connections. TER- MINAL NO. WIRE COLOR ITEM CONDITION DATA (DC Voltage) 4 G Throttle control motor [Ignition switch: ON] ● Engine stopped ● Shift lever: D ● Accelerator pedal: Released 0 - 14V 5 L Throttle control motor [Ignition switch: ON] ● Engine stopped ● Shift lever: D ● Accelerator pedal: Fully depressed 0 - 14V PBIB1104E PBIB1105E PBIB1835E |