|
|
содержание .. 2050 2051 2052 2053 ..
TM-166 < UNIT DISASSEMBLY AND ASSEMBLY > [6MT: RS6F52A] TRANSAXLE ASSEMBLY 34. Remove differential side bearing outer race (clutch housing side) from clutch housing using the puller (A) (SST: CAUTION: Never damage clutch housing. 35. Remove input shaft oil seal from clutch housing, using oil seal remover (commercial service tool). CAUTION: Never damage clutch housing. 36. Remove snap ring from clutch housing. CAUTION: Never damage clutch housing. 37. With output gear assembly held by hand, turn clutch housing upside down as shown in the figure. CAUTION: • When turning clutch housing upside down, hold output gear assembly by hand so that it will not become • Never damage clutch housing. 38. With output gear assembly held by hand, slowly remove output gear assembly from clutch housing. If output gear assembly can JSDIA6489ZZ SCIA0398E JPDIC0044ZZ JPDIC0075ZZ |