Mitsubishi L200 (2020 year). Manual in english

Multi information display - Type 1

5- Lane Departure Warning (LDW) indica-

Multi information display

NOTE

tor display* ® p. 6-112

switch

Each time the multi information display

6- Information screen ® p. 5-05

Each time the multi information display

back switch is operated, the buzzer sounds

7- Engine coolant temperature display

and the multi information display return to

switch is operated, the buzzer sounds and the

® p. 5-07

the position before pressing the multi infor-

multi information display changes between

8- Odometer ® p. 5-08

mation display switch.

information such as warnings, tripmeter,

9- Cruise

control

indicator

display

average and momentary fuel consumption,

® p. 6-80

distance range etc.

10- Speed limiter indicator display*

It is also possible to change elements such as

® p. 6-84

the language and units used on the multi in-

11-

“

” or “

” mark indicator ® p. 5-06

formation display by operating the multi in-

12- Gearshift indicator display

(vehicles

formation display switch.

with M/T) ® p. 6-29

13- Selector lever position indicator display

(vehicles with A/T) ® p. 6-33

14- Fuel remaining display ® p. 5-07

15- Outside temperature display ® p. 5-08

16- Auto Stop & Go indicator display*

® p. 6-25

Auto Stop & Go OFF indicator display*

® p. 6-28

NOTE

The fuel units, outside temperature units,

display language, and other settings can be

changed.

Refer to “Changing the function settings” on

page 5-13.

5-04

Instruments and controls

Multi information display - Type 1

Information screen (when the

ignition switch or the operation

ignition switch is turned from

ignition switch or the operation

mode is OFF)

the “LOCK” position to the

mode is ON)

Each time you lightly press the multi infor-

“ON” position or the operation

Each time you lightly press the multi infor-

mation display switch, the display screen

mode is changed from OFF to

mation display switch, the display screen

switches in the following order.

ON)

When the ignition switch is turned to the

“ON” position or the operation mode is put in

ON, the display screen switches in the fol-

lowing order.

^*1: When there is no warning display

^*2: When there is a warning display

Tripmeter

® p. 5-08

Tripmeter

® p. 5-08

3- Auto Stop & Go (AS&G) monitor*

® p. 5-12

*: When the inspection time has arrived

ECO score display ® p. 5-12

1. Screen when the ignition switch or the

4- Service reminder ® p. 5-09

operation mode is OFF

5- Redisplay of a warning display screen

2. System check screen ® p. 5-10

® p. 5-06

3. Screen when the ignition switch or the

operation mode is ON

^*1: When there is no warning display

4. Service reminder ® p. 5-09

^*2: When there is a warning display

Tripmeter

® p. 5-08

Instruments and controls

5-05

Multi information display - Type 1

To return to the screen displayed before

Tripmeter

® p. 5-08

NOTE

the warning display

3- Driving range display ® p. 5-10

z While driving, the function setting screen is

Even if the cause of the warning display is

ECO drive assist display ® p. 5-12

not displayed even if you operate the multi

not eliminated, you can return to the screen

4- Average fuel consumption display

information display switch.

that was displayed before the warning dis-

® p. 5-11

Always stop the vehicle in a safe place be-

ECO drive assist display ® p. 5-12

fore operating and firmly apply the parking

play.

brake and put the gearshift lever into the “N”

If you press the multi information display

5- Average speed display ® p. 5-11

(Neutral) position (M/T) or the selector lever

switch, the display screen switches to the

Momentary fuel consumption display

into the “P” (PARK) position (A/T).

screen that was displayed before the warning

® p. 5-11

Refer to “Changing the function settings” on

display and the mark (A) is displayed.

6- Auto Stop & Go

(AS&G) monitor*

page 5-13.

® p. 5-12

z When there is information to be announced,

ECO score display ® p. 5-12

such as a system fault, the buzzer sounds

2WD/4WD operation indicator display*

and the screen display is switched.

(Vehicles with Easy Select

4WD)

Refer to “Interrupt display screen” on page

5-06.

® p. 6-43

(Vehicles with Super Select

4WD II)

® p. 6-49

Interrupt display screen

8- Service reminder ® p. 5-09

9- Function setting screen ® p. 5-13

Warning display

10- Redisplay of a warning display screen

® p. 5-06

When there is information to be announced,

such as a system fault, the buzzer sounds and

If you want to switch the dis-

the information screen is switched to the

NOTE

play

warning display screen.

While driving, the service reminder are not

Refer to the warning list and take the neces-

Warning display screens with a “

” or “

”

displayed even if you operate the multi in-

mark displayed in the upper right of the

sary measures.

formation display switch. Always stop the

Refer to

“Warning display list” on page

screen can be switched. If you want to switch

vehicle in a safe place before operating.

5-26.

the display, press the multi information dis-

When the cause of the warning display is

play switch as follows.

eliminated, the warning display goes out au-

“

”: Press lightly.

tomatically.

“

”: Press for approximately 2 seconds or

more.

5-06

Instruments and controls

Multi information display - Type 1

Redisplay of a warning display

Fuel remaining display

NOTE

screen

This displays the amount of fuel remaining.

z When the mark is displayed, the warning

When the mark is displayed, if you lightly

display screen can be redisplayed on the in-

press the multi information display switch a

formation screen.

few times, the warning display screen you

Refer to “Information screen (when the igni-

tion switch or the operation mode is OFF)”

switched from is redisplayed.

on page 5-05.

Refer to “Information screen (when the igni-

Other interrupt displays

tion switch or the operation mode is ON)”

The operation status of each system is dis-

on page 5-05.

played on the information screen.

Refer to the appropriate page in the warning

Engine coolant temperature

display list for further details.

display

Refer to “Other interrupt displays” on page

This indicates the engine

5-45.

coolant temperature.

F (1) - Full

If the coolant becomes hot,

E (0) - Empty

mark display

“

” will blink.

This is displayed when you press the multi

Pay careful attention to the

NOTE

information display switch and return from

engine coolant temperature

the warning display screen to the previous

display while you are driv-

z It may take several seconds to stabilise the

screen.

display after refilling the tank.

ing.

This mark is also displayed if there is another

z If fuel is added with the ignition switch or

the operation mode is in ON, the fuel gauge

warning other than the one displayed.

CAUTION

may incorrectly indicate the fuel level.

When the cause of the warning display is

The arrow (A) indicates that the fuel tank

eliminated, the mark goes out automatical-

z If the engine is overheating, “

” will blink.

filler door is located on the left side of the

ly.

In this case, the bar graph is in the red zone.

body.

Immediately park the vehicle in a safe place

and take the required measures. Refer to

“Engine overheating” on page 8-09.

Instruments and controls

5-07

Multi information display - Type 1

Fuel remaining warning dis-

CAUTION

Tripmeter

play

The tripmeter indicates the distance travelled

z Do not drive with an extremely low fuel lev-

When the fuel is reduced to approximately 10

el; running out of fuel could cause damage

between two points.

to the fuel system.

litres, the information screen switches to the

interrupt display of the fuel remaining warn-

Example usage of tripmeter

and tripmeter

ing display, and the “

” mark (B) on the fuel

NOTE

remaining display flashes slowly

(approxi-

It is possible to measure two currently

mately once per second). After a few sec-

z On inclines or curves, the display may be in-

travelled distances, from home using

correct due to the movement of fuel in the

tripmeter

and from a particular point

onds, the information screen returns from the

tank.

fuel remaining warning display to the previ-

on the way using tripmeter

ous screen.

Outside temperature display

If the remaining fuel level is reduced further,

This shows the temperature

the information screen switches to the fuel re-

outside the vehicle.

To reset the tripmeter

maining warning display and the “

” mark

(B) on the fuel remaining display flashes

To return the display to 0, hold down the

quickly (approximately twice per second).

multi information display switch for approxi-

mately 2 seconds or more. Only the currently

displayed value will be reset.

NOTE

z The display setting can be changed to the

Example

preferred units (°C or °F).

If tripmeter

is displayed, only tripmeter

Refer to “Changing the function settings” on

will be reset.

page 5-13.

z Depending on factors such as the driving

conditions, the displayed temperature may

NOTE

vary from the actual outside temperature.

z When disconnecting the battery terminal, the

memory of tripmeter

and

are

Odometer

cleared, and the display returns to “0”.

The odometer indicates the distance travel-

led.

5-08

Instruments and controls

Multi information display - Type 1

Service reminder

To reset

NOTE

Displays the approximate time until the next

The “---” display can be reset while the igni-

z The distance is shown in units of 100 km

periodic

inspection

recommended by

(100 miles). The time is shown in units of

tion switch or the operation mode is in OFF.

MITSUBISHI MOTORS. “---” is displayed

months.

When the display is reset, the time until the

when the inspection time has arrived.

next periodic inspection is displayed and the

2. This informs you that a periodic inspec-

warning display is no longer displayed when

tion is due. Consult a MITSUBISHI

the ignition switch is turned from the

NOTE

MOTORS Authorized Service Point.

“LOCK” position to the “ON” position or the

z Depending on the vehicle specifications, the

At that time, when the ignition switch is

operation mode is changed from OFF to ON.

displayed time until the next periodic inspec-

turned from the “LOCK” position to the

1. When you lightly press the multi infor-

tion may differ from that recommended by

“ON” position or the operation mode is

mation display switch a few times, the

MITSUBISHI MOTORS.

In addition, the display settings for the next

changed from OFF to ON, the warning

information display switches to the serv-

periodic inspection time can be modified.

display is displayed for a few seconds on

ice reminder display screen.

To modify the display settings, have it adjus-

the information screen.

ted at a MITSUBISHI MOTORS Authorized

Service Point.

For more details, contact a MITSUBISHI

MOTORS Authorized Service Point.

3. After your vehicle is inspected at a

MITSUBISHI MOTORS Authorized

Service Point, it displays the time until

the next periodic inspection.

2. Press and hold the multi information dis-

play switch for approximately 2 seconds

or more to display “

” and make it

flash.

(If there is no operation for ap-

proximately

10 seconds with flashing,

1. Displays the time until the next periodic

the display returns to the previous

inspection.

screen.)

Instruments and controls

5-09

Multi information display - Type 1

3. Lightly press the multi information dis-

Driving range display

NOTE

play switch while the icon is flashing to

This displays the approximate driving range

change the display from

“---” to

z When “---” is displayed, after a certain dis-

tance and a certain period of time, the dis-

(how many more kilometres or miles you can

“CLEAR”. After this, the time until the

play is reset and the time until the next peri-

drive). When the driving range falls below

next periodic inspection will be dis-

odic inspection is displayed.

approximately 50 km (30 miles), “---” is dis-

played.

z If you accidentally reset the display, consult

played.

a MITSUBISHI MOTORS Authorized Serv-

Refuel as soon as possible.

ice Point.

System check screen

When the ignition switch is turned to the

“ON” position or the operation mode is put in

ON, the system check screen is displayed for

approximately 4 seconds. If there is no fault,

information screen (when the ignition switch

NOTE

or the operation mode is ON) is displayed.

The driving range is determined based on

If there is a fault, the screen changes to warn-

the fuel consumption data. This may vary

ing display.

CAUTION

depending on the driving conditions and

Refer to

“Warning display list” on page

habits. Treat the distance displayed as just a

The customer is responsible for making sure

5-26.

rough guideline.

that periodic inspection and maintenance are

When you refuel, the driving range display

performed.

is updated.

Inspections and maintenance must be per-

However, if you only add a small amount of

formed to prevent accidents and malfunc-

fuel, the correct value will not be displayed.

tions.

Fill with a full tank whenever possible.

On rare occasions, the value displayed for

the driving range may change if you are

NOTE

parked on an extremely steep incline. This is

“---”display cannot be reset when the igni-

due to the movement of fuel in the tank and

NOTE

tion switch or the operation mode is in ON.

does not indicate a malfunction.

z The system check screen display varies de-

pending on the customer’s equipment.

5-10

Instruments and controls

Multi information display - Type 1

For the method for changing the average

NOTE

speed display setting, refer to “Changing the

z The display setting can be changed to the

The average fuel consumption display can

function settings” on page 5-23.

preferred units (km or miles).

be reset separately for the auto reset mode

Refer to “Changing the function settings” on

and for the manual reset mode.

page 5-13.

“---” is displayed when the average fuel con-

sumption cannot be measured.

The initial

(default) setting is

“Auto reset

Average fuel consumption dis-

mode”.

play

The average fuel consumption depends on

the driving condition (road condition, driv-

This displays the average fuel consumption

ing behavior, etc.). The displayed fuel con-

from the last reset to the present time.

sumption may vary from the actual fuel con-

NOTE

The reset mode conditions for the average

sumption. Treat the fuel consumption dis-

The average speed display can be reset sepa-

fuel consumption display can be switched be-

played as just a rough guideline.

rately for the auto reset mode and for the

tween “Auto reset” and “Manual reset”.

The memory of the auto reset mode or man-

manual reset mode.

ual reset mode for the average fuel con-

Refer to “Changing the reset mode for aver-

“---” is displayed when the average speed

sumption display is erased if the battery is

age fuel consumption and average speed” on

cannot be measured.

disconnected.

page 5-14.

The initial

(default) setting is

“Auto reset

The display setting can be changed to the

mode”.

For information on how to change the aver-

preferred units {km/L, mpg (US), mpg (UK)

The display setting can be changed to the

age fuel consumption display setting, refer to

or L/100 km}.

preferred units (km/h or mph).

“Changing the function settings” on page

Refer to “Changing the function settings” on

5-23.

page 5-23.

The memory of the auto reset mode or man-

ual reset mode for the average speed display

Average speed display

is erased if the battery is disconnected.

This displays the average speed from the last

reset to the present time.

Momentary fuel consumption

The reset mode conditions for the average

speed display can be switched between “Auto

display

reset” and “Manual reset”.

While driving, this displays the momentary

Refer to “Changing the reset mode for aver-

fuel consumption, using a bar graph.

age fuel consumption and average speed” on

page 5-14.

Instruments and controls

5-11

Multi information display - Type 1

Auto Stop & Go (AS&G) moni-

ECO drive level

tor*

The accumulated time the engine has been

stopped by Auto Stop & Go (AS&G) system

is displayed.

The “

” mark (A) in the momentary fuel

Refer to “Auto Stop & Go (AS&G) system”

gauge shows the average fuel consumption.

on page 6-25.

Low

High

When the momentary fuel consumption sur-

passes the average fuel consumption, the mo-

mentary fuel consumption is displayed with a

green bar graph.

Be conscious of maintaining the momentary

NOTE

fuel consumption above the average fuel con-

z On vehicles with A/T, the ECO drive assist

sumption, driving with the better fuel con-

is displayed only when vehicle is driving

sumption can be possible.

with the selector lever in the “D” (DRIVE)

NOTE

position or when vehicle is driving in the

z When the ignition switch or the operation

sport mode.

NOTE

mode is ON again, the accumulated time

will be reset.

z When the momentary fuel consumption can-

ECO score display

not be measured, the bar graph is not dis-

played.

ECO score indicates the points you have

ECO drive assist display

z The display setting can be changed to the

scored on fuel-efficient driving by the num-

preferred units {km/L, mpg (US), mpg (UK)

This function displays how fuel-efficiently

ber of leaves as follows:

or L/100 km}.

you are driving under different driving condi-

Refer to “Changing the function settings” on

tions.

[When the ignition switch or the operation

page 5-23.

The ECO drive assist display will change as

mode is ON]

z It is possible to cancel the green bar graph.

follows if you do fuel-efficient driving using

Refer to “Changing the function settings” on

The display shows the score you achieved in

the accelerator in a way well matched with

page 5-23.

the last several minutes.

the vehicle speed.

[When the ignition switch is turned off or the

operation mode is put in OFF]

5-12

Instruments and controls

Multi information display - Type 1

The display shows the overall ECO score the

Refer to “Information screen (when the

NOTE

function has counted from the time when the

ignition switch or the operation mode is

ignition switch is turned to “ON” to the time

ON” on page 5-05.

z To return the menu screen to the function

setting screen, press and hold the multi in-

when it is turned to “LOCK” or “ACC”, or

formation display switch for approximately

from the time when the operation mode is set

2 seconds or more.

to “ON” to the time when it is set to “OFF”.

z If no operations are made within approxi-

mately 30 seconds of the menu screen being

displayed, the display returns to the function

ECO drive level

setting screen.

4. Select the item to change on the menu

CAUTION

screen and change to the desired setting.

For safety, stop the vehicle before operating.

Refer to the following items for further

While driving, even if you operate the multi

details on the operation methods.

information display switch, the function set-

Low

High

ting screen is not displayed.

Refer to “Changing the reset mode for aver-

age fuel consumption and average speed” on

3. Press and hold the multi information dis-

page 5-14.

play switch for approximately 2 seconds

Refer to “Changing the fuel consumption dis-

Changing the function settings

or more to switch from the setting mode

play unit” on page 5-15.

screen to the menu screen.

The “Display language”, “Temperature unit”,

Refer to “Changing the temperature unit” on

“Fuel consumption unit”, and “Average fuel

page 5-15.

consumption and speed reset method” etc.

Refer to “Changing the display language” on

setting can be modified as desired.

page 5-15.

1. Stop the vehicle in a safe place.

Refer to “Operation sound setting” on page

Firmly apply the parking brake and put

5-16.

the gearshift lever into the “N” (Neutral)

Refer to

“Changing the time until

“REST

position (M/T) or the selector lever into

REMINDER” is displayed” on page 5-16.

the “P” (PARK) position (A/T).

Refer to “Changing the turn-signal sound” on

2. Lightly press the multi information dis-

page 5-16.

play switch a few times to switch the in-

Refer to “Changing the momentary fuel con-

formation screen to the function setting

sumption display” on page 5-17.

screen.

Instruments and controls

5-13

Multi information display - Type 1

Refer to “Returning to the factory settings”

3. Press and hold the multi information dis-

Auto reset mode

on page 5-17.

play switch for approximately 2 seconds

When the average fuel consumption and

or more to switch from A/1 (Auto reset

average speed are being displayed, if

mode) to M/2/P (Manual reset mode), or

NOTE

you hold down the multi information

from M/2/P to A/1.

display switch, the average fuel con-

z If the battery is disconnected, these function

The setting is changed to the selected

settings are reset from memory and is auto-

sumption and average speed displayed at

mode condition.

matically to the factory settings.

that time are reset.

When the ignition switch or the opera-

Manual reset mode

tion mode is in the following condition,

Changing the reset mode for

When the average fuel consumption and

the average fuel consumption display

average fuel consumption and

average speed are being displayed, if

and average speed display are automati-

average speed

you hold down the multi information

cally reset.

display switch, the average fuel con-

The mode conditions for the average fuel

[Except for vehicles equipped with key-

sumption and average speed displayed at

consumption and average speed display can

less operation system]

that time are reset.

The ignition switch is in the “ACC” or

be switched between “Auto reset” and “Man-

When the following operation is per-

“LOCK” position for approximately 4

ual reset”.

1. Press and hold the multi information dis-

formed, the mode setting is automatical-

hours or longer.

ly switched from manual to auto.

play switch for approximately 2 seconds

[For vehicles equipped with keyless op-

[Except for vehicles equipped with key-

or more to switch from the setting mode

eration system]

less operation system]

The operation mode is in ACC or OFF

screen to the menu screen.

Turn the ignition switch from the “ACC”

for approximately 4 hours or longer.

Refer to

“Changing the function set-

or “LOCK” position to the “ON” posi-

tings” on page 5-13.

tion.

2. Lightly press the multi information dis-

NOTE

[For vehicles equipped with keyless op-

play switch to select

eration system]

The average fuel consumption display and

“AVG (average fuel consumption and

Change the operation mode from ACC

average speed display can be reset separately

average speed setting)”.

for the auto reset mode and for the manual

or OFF to ON.

reset mode.

The memory of the auto reset mode or man-

Switching to auto occurs automatically.

ual reset mode for the average fuel con-

If switching to manual mode is done,

sumption display and average speed display

however, the data from the last reset is

is erased if the battery is disconnected.

displayed.

5-14

Instruments and controls

Multi information display - Type 1

Changing the fuel consumption

2. Lightly press the multi information dis-

NOTE

play switch to select “

” (temperature

display unit

z The display units for the driving range, the

unit setting).

The display unit for fuel consumption can be

average fuel consumption, the average speed

3. Press and hold the multi information dis-

and the momentary fuel consumption are

switched. The distance, speed, and amount

play switch for approximately 2 seconds

switched, but the units for the indicating

units are also switched to match the selected

needle (speedometer), the odometer and the

or more to switch in from °C to °F, or

fuel consumption unit.

tripmeter will remain unchanged.

from °F to °C.

1. Press and hold the multi information dis-

The setting is changed to the selected

play switch for approximately 2 seconds

temperature unit.

The distance and speed units are also switch-

or more to switch from the setting mode

ed in the following combinations to match

screen to the menu screen.

the selected fuel consumption unit.

NOTE

Refer to

“Changing the function set-

tings” on page 5-13.

Distance

z The temperature value on the air condition-

2. Lightly press the multi information dis-

Fuel con-

Speed (aver-

ing panel is switched in conjunction with the

(driving

play switch to select

sumption

age speed)

outside temperature display unit of the multi

range)

information display.

“AVG UNIT (fuel consumption display

However, “°C” or “°F” are not shown on the

setting)”.

L/100 km

km/h

temperature display of an air conditioning.

3. Press and hold the multi information dis-

mpg (US)

mile(s)

mph

play switch for approximately 2 seconds

mpg (UK)

mile(s)

mph

or more to display “AVG UNIT”.

Changing the display language

4. Lightly press the multi information dis-

km/L

km/h

The language of the multi information dis-

play switch to select the units.

play can be switched.

Changing the temperature unit

5. Press and hold the multi information dis-

1. Press and hold the multi information dis-

play switch for approximately 2 seconds

The display unit for temperature can be

play switch for approximately 2 seconds

or more to change the setting to the se-

switched.

or more to switch from the setting mode

lected unit.

1. Press and hold the multi information dis-

screen to the menu screen.

play switch for approximately 2 seconds

Refer to

“Changing the function set-

or more to switch from the setting mode

tings” on page 5-13.

screen to the menu screen.

2. Lightly press the multi information dis-

Refer to

“Changing the function set-

play switch to select

tings” on page 5-13.

“LANGUAGE” (language setting).

Instruments and controls

5-15

Multi information display - Type 1

3. Press and hold the multi information dis-

play switch for approximately 2 seconds

or more to display “LANGUAGE”.

or more to switch from ON (operation

or more to display “ALARM”.

4. Lightly press the multi information dis-

sound on) to OFF (operation sound off),

4. Lightly press the multi information dis-

play switch to select the desired lan-

or from OFF to ON.

play switch to select the time until the

guage.

The setting is changed to the selected

display.

5. If you hold down the multi information

condition.

5. Press and hold the multi information dis-

display switch for approximately 2 sec-

play switch for approximately 2 seconds

onds or more, the setting is changed to

or more, the setting is changed to the se-

NOTE

the selected language.

lected time.

The operation sound setting only deactivates

the operation sound of the multi information

NOTE

display switch and rheostat illumination but-

NOTE

ton. The warning display and other sounds

z If “---” is selected in the language setting, a

z The drive time is reset when the ignition

cannot be deactivated.

warning message is not displayed when

switch is turned off or the operation mode is

there is a warning display or interrupt dis-

put in OFF.

play.

Changing the time until

“REST REMINDER” is dis-

Changing the turn-signal

Operation sound setting

played

sound

You can turn off the operation sounds of the

The time until the display appears can be

It is possible to change the turn-signal sound.

multi information display switch and rheostat

changed.

1. Press and hold the multi information dis-

illumination button.

1. Press and hold the multi information dis-

play switch for approximately 2 seconds

1. Press and hold the multi information dis-

play switch for approximately 2 seconds

or more to switch from the setting mode

play switch for approximately 2 seconds

or more to switch from the setting mode

screen to the menu screen.

or more to switch from the setting mode

screen to the menu screen.

Refer to

“Changing the function set-

screen to the menu screen.

Refer to

“Changing the function set-

tings” on page 5-13.

Refer to

“Changing the function set-

tings” on page 5-13.

2. Lightly press the multi information dis-

tings” on page 5-13.

2. Lightly press the multi information dis-

play switch to select

(changing the

2. Lightly press the multi information dis-

play switch to select

“ALARM” (rest

turn-signal sound).

play switch to select

“

”

(operation

time setting).

sound setting).

5-16

Instruments and controls

Multi information display - Type 2

3. Press and hold the multi information dis-

Returning to the factory set-

NOTE

play switch for approximately 2 seconds

tings

• Momentary fuel consumption with the

or more to switch from 1 (turn-signal

Many of the function settings can be returned

green bar graph: ON

sound 1) to 2 (turn-signal sound 2), or

to their factory settings.

from 2 to 1.

1. Press and hold the multi information dis-

The setting changes to the selected turn-

Multi information display -

play switch for approximately 2 seconds

signal sound.

or more to switch from the setting mode

Type 2

screen to the menu screen.

Changing the momentary fuel

Refer to

“Changing the function set-

Always stop the vehicle in a safe place before

consumption display

operating.

tings” on page 5-13.

It is possible to change the bar graph setting

2. Lightly press the multi information dis-

The following information is included on the

of the momentary fuel consumption display.

play switch to select “RESET” (return-

multi information display: odometer, tripme-

1. Press and hold the multi information dis-

ing to the factory settings).

ter, average fuel consumption etc.

play switch for approximately 2 seconds

3. When you press and hold the multi in-

or more to switch from the setting mode

formation display switch for approxi-

screen to the menu screen.

mately 5 seconds or more, the buzzer

Refer to

“Changing the function set-

sounds and all of the function settings

tings” on page 5-13.

are returned to the factory settings.

2. Lightly press the multi information dis-

play switch to select

(changing

NOTE

the momentary fuel consumption dis-

The factory settings are as follows.

play).

• Average fuel consumption and average

3. Press and hold the multi information dis-

speed reset mode: A (Auto reset)

play switch for approximately 2 seconds

• Fuel consumption display unit: L/100 km

or more to switch from ON (with the

• Temperature unit: °C (Celsius)

green bar graph) to OFF (without the

• Display language: ENGLISH or RUSSI-

1. Engine coolant temperature display

green bar graph), or from OFF to ON.

® p. 5-20

The setting changes to the selected bar

• Operation sounds: ON (Operation sounds

2. Gearshift indicator ® p. 6-29

graph setting.

on)

3. Fuel remaining display ® p. 5-21

• “REST REMINDER” display: OFF

4. Information display ® p. 5-18

• Turn-signal sound: Turn-signal sound 1

5. Service reminder ® p. 5-21

Instruments and controls

5-17

Multi information display - Type 2

NOTE

z When the ignition switch is OFF, the gear-

shift indicator, fuel remaining display and

engine coolant temperature display are not

displayed.

Information display

Each time you lightly press the multi information display switch (A), the display switches in the following order.

1- Odometer ® p. 5-19

4- Meter illumination control ® p. 5-19

6- Average fuel consumption display

5- Driving range display ® p. 5-19

® p. 5-20

Tripmeter

® p. 5-19

7- Service reminder (distance) ® p. 5-21

Tripmeter

® p. 5-19

8- Service reminder (month) ® p. 5-21

5-18

Instruments and controls

Multi information display - Type 2

NOTE

z When the ignition switch is OFF, the driving range display and average fuel consumption display are not displayed.

z While driving, the service reminder is not displayed even if you operate the multi information display switch.

Odometer

If tripmeter

is displayed, only tripmeter

1- Brightness level

will be reset.

2- Multi information display switch

The odometer indicates the distance travel-

led.

NOTE

Tripmeter

z When disconnecting the battery terminal, the

z You can adjust to 8 different levels respec-

The tripmeter indicates the distance travelled

memory of tripmeter

and

are

tively for when the position lamps are illu-

between two points.

cleared, and the display returns to “0”.

minated and when they are not.

Each time you reduce two brightness levels,

the segment display of the brightness level

Example usage of tripmeter

and tripmeter

Meter illumination control

decreases one by one.

Each time you press and hold the multi infor-

z If the vehicle is equipped with the automatic

It is possible to measure two currently

lamp control, when the lamp switch is in a

travelled distances, from home using

mation display switch (2) for about 2 seconds

position other than the “OFF” position, the

tripmeter

and from a particular point

or more, there is a sound and the brightness

meter illumination switches automatically to

on the way using tripmeter

of the instruments changes.

the adjusted brightness, depending on the

brightness outside the vehicle.

z The brightness level of the instruments is

stored when the ignition switch is turned off.

To reset the tripmeter

Driving range display

To return the display to 0, hold down the

multi information display switch for about 2

This displays the approximate driving range

seconds or more. Only the currently dis-

(how many more kilometres or miles you can

played value will be reset.

drive). When the driving range falls below

approximately 50 km (30 miles), “---” is dis-

Example

played.

Instruments and controls

5-19

Multi information display - Type 2

NOTE

Engine coolant temperature

display

z The driving range is determined based on

The average fuel consumption display can

the fuel consumption data. This may vary

be reset separately for the auto reset mode

This indicates the engine

depending on the driving conditions and

and for the manual reset mode.

coolant temperature.

habits. Treat the distance displayed as just a

“---” is displayed when the average fuel con-

If the coolant becomes hot,

rough guideline.

sumption cannot be measured.

“

” will blink.

z When you refuel, the driving range display

The initial

(default) setting is

“Auto reset

Pay careful attention to the

is updated.

mode”.

engine coolant temperature

However, if you only add a small amount of

The average fuel consumption depends on

fuel, the correct value will not be displayed.

the driving condition (road condition, driv-

display while you are driv-

Fill with a full tank whenever possible.

ing behavior, etc.). The displayed fuel con-

ing.

z On rare occasions, the value displayed for

sumption may vary from the actual fuel con-

the driving range may change if you are

sumption. Treat the fuel consumption dis-

parked on an extremely steep incline. This is

played as just a rough guideline.

due to the movement of fuel in the tank and

The memory of the auto reset mode or man-

does not indicate a malfunction.

ual reset mode for the average fuel con-

z The display setting can be changed to the

sumption display is erased if the battery is

preferred units (km or miles).

disconnected.

CAUTION

Refer to “Changing the function settings” on

The display setting can be changed to the

If the engine is overheating, “

” will blink.

page 5-23.

preferred units {km/L, L/100 km, mpg}.

In this case, the bar graph is in the red zone.

Refer to “Changing the function settings” on

Immediately park the vehicle in a safe place

page 5-23.

and take the required measures. Refer to

Average fuel consumption dis-

“Engine overheating” on page 8-09.

play

This displays the average fuel consumption

from the last reset to the present time.

The reset mode conditions for the average

fuel consumption display can be switched be-

tween “Auto reset” and “Manual reset”.

For information on how to change the aver-

age fuel consumption display setting, refer to

“Changing the function settings” on page

5-23.

5-20

Instruments and controls

Multi information display - Type 2

Fuel remaining display

Fuel remaining warning dis-

NOTE

The fuel remaining display indicates the fuel

play

z On inclines or curves, the display may be in-

level in the fuel tank when the ignition switch

If the remaining fuel level is approximately

correct due to the movement of fuel in the

is ON.

tank.

10 litres or less

(one segment displayed)

when the ignition switch is turned to the

“ON” position, the last segment of the fuel

Service reminder

gauge flashes. If the remaining fuel level is

Displays the approximate time until the next

reduced further, the last segment of the fuel

periodic inspection that MITSUBISHI

gauge goes out and “

” flash.

MOTORS recommends.“---” is displayed

when the inspection time has arrived.

The spanner mark indicates the periodic in-

spection.

NOTE

Depending on the vehicle specifications, the

1- Full

displayed time until the next periodic inspec-

0- Empty

tion may differ from that of MITSUBISHI

MOTORS recommends.

In addition, the display settings for the next

NOTE

periodic inspection time can be modified.

To modify the display settings, have it adjus-

z It may take several seconds to stabilise the

ted at a MITSUBISHI MOTORS Authorized

display after refilling the tank.

CAUTION

Service Point.

z If fuel is added with the ignition switch is

z Do not drive with an extremely low fuel lev-

For more details, contact a MITSUBISHI

ON, the fuel gauge may incorrectly indicate

el; running out of fuel could cause damage

MOTORS Authorized Service Point.

the fuel level.

to the fuel system.

z The fuel lid mark (A) indicates that the fuel

tank filler door is located on the left side of

the vehicle.

Instruments and controls

5-21

Multi information display - Type 2

Distance

To reset

3. Lightly press the multi information dis-

play switch while the icon is flashing to

The “---” display can be reset while the igni-

change the display from

“---” to

tion switch is in OFF.

“cLEAr”. After this, the time until the

1. When you lightly press the multi infor-

Month

next periodic inspection will be dis-

mation display switch a few times, the

played.

information display switches to the serv-

ice reminder display.

1. Displays the time until the next periodic

inspection.

NOTE

z The distance is shown in units of 100 km

(100 miles). The time is shown in units of

months.

CAUTION

2. This informs you that a periodic inspec-

2. Press and hold the multi information dis-

z The customer is responsible for making sure

tion is

due. Please consult a

play switch for about 2 seconds or more

that periodic inspection and maintenance are

to make the spanner mark start flashing.

performed.

MITSUBISHI MOTORS Authorized

(If there is no operation for about 10 sec-

Inspections and maintenance must be per-

Service Point.

formed to prevent accidents and malfunc-

3. After your vehicle is inspected at a

onds with flashing, the display will re-

tions.

MITSUBISHI MOTORS Authorized

vert to its original indication.)

Service Point, it displays the time until

the next periodic inspection.

NOTE

“---” display cannot be reset when the igni-

tion switch is in ON.

5-22

Instruments and controls

Multi information display - Type 2

1. When you lightly press the multi infor-

z When the ignition switch is turned from

NOTE

mation display switch a few times, the

the “ACC” or “LOCK” position to the

z When “---” is displayed, after a certain dis-

information display switches to the driv-

“ON” position, the mode setting is auto-

tance and a certain period of time, the dis-

ing range display.

matically switched from manual to auto.

play is reset and the time until the next peri-

Refer to “Information display” on page

odic inspection is displayed.

5-18.

Auto reset mode

z If you accidentally reset the display, consult

a MITSUBISHI MOTORS Authorized Serv-

2. Each time you press the multi informa-

When the average fuel consumption is

ice Point.

tion display switch for

2 seconds or

being displayed, if you hold down the

Mitsubishi L200 (2020 year). Manual in english - page 4