Mitsubishi Montero (1991+). Manual - part 171

 

  Index      Mitsubishi     Mitsubishi Montero - service repair manual 1991 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  169  170  171  172   ..

 

 

Mitsubishi Montero (1991+). Manual - part 171

 

 

meter long with force of one Newton applied). Some conversions are:

     *   A meter kilogram is about 7.2 foot pounds.

     *   A foot pound is about 1.4 Newton-meters.

     *   A centimeter kilogram (cmkg) is equal to .9 inch pounds.

         PRESSURE

         Pressure is another complicated measurement. Pressure is

described as a force or weight applied to a given area. Our common

unit is pounds per square inch. Metric units can be expressed in

several ways. One is the kilogram per square centimeter (kg/cm ).

Another unit of pressure is the Pascal (force of one Newton on an area

of one square meter), which equals about 4 ounces on a square yard.

Since this is a very small amount of pressure, we usually see the

kiloPascal, or kPa (1000 Pascals). Another common automotive term for

pressure is the bar (used by German manufacturers), which equals 10

Pascals. Thoroughly confused? Try the examples below:

     *   Atmospheric pressure at sea level is about 14.7 psi.

     *   Atmospheric pressure at sea level is about 1 bar.

     *   Atmospheric pressure at sea level is about 1 kg/cm .

     *   One pound per square inch is about 7 kPa.

         CONVERSION FACTORS

CONVERSION FACTORS





TO CONVERT                 



TO                     



 MULTIPLY BY  





  



LENGTH                     



                       



              





Millimeters (mm)           



Inches                 



  .03937      





Inches                     



Millimeters            



  25.4        





Meters (M)                 



Feet                   



  3.28084     





Feet                       



Meters                 



  .3048       





Kilometers(Km)             



Miles                  



  .62137      





  



AREA                       



                       



              





Square Centimeters (cm )   



Square Inches          



  .155        





Square Inches              



Square Centimeters     



  6.45159     





  



VOLUME                     



                       



              





Cubic Centimeters          



Cubic Inches           



  .06103      





Cubic Inches               



Cubic Centimeters      



  16.38703    





Liters                     



Cubic Inches           



  61.025      





Cubic Inches               



Liters                 



  .01639      





Liters                     



Quarts                 



  1.05672     





Quarts                     



Liters                 



  .94633      





Liters                     



Pints                  



  2.11344     





Pints                      



Liters                 



  .47317      





Liters                     



Ounces                 



  33.81497    





Ounces                     



Liters                 



  .02957      





  



WEIGHT                     



                       



              





Grams                      



Ounces                 



  .03527      





Ounces                     



Grams                  



  28.34953    





Kilograms                  



Pounds                 



  2.20462     





Pounds                     



Kilograms              



  .45359      





  



WORK                       



                       



              





Centimeter Kilograms       



Inch Pounds            



  .8676       





Pounds/Sq. Inch            



Kilograms/Sq.Centimeter



  .07031      





Bar                        



Pounds/Sq. Inch        



  14.504      





Pounds/Sq. Inch            



Bar                    



  .06895      





Atmosphere                 



Pounds/Sq. Inch        



  14.696      





Pounds/Sq. Inch            



Atmosphere             



  .06805      





  



TEMPERATURE                



                       



              





Centigrade Degrees         



Fahrenheit Degrees     



(

Cx(9)/5)+32 





Fahrenheit Degrees         



Centigrade Degrees     



(

F-32)x(5)/9 





CONVERSION FACTORS (Cont.)





INCHES                         DECIMALS                         mm  









                                                                   





1/64  ......................  .016  ........................  .397 





1/32  ......................  .031  ........................  .794 





3/64  ......................  .047  .......................  1.191 





1/16  ......................  .063  .......................  1.588 





5/64  ......................  .078  .......................  1.984 





3/32  ......................  .094  .......................  2.381 





7/64  ......................  .109  .......................  2.778 





1/8  .......................  .125  .......................  3.175 





9/64  ......................  .141  .......................  3.572 





5/32  ......................  .156  .......................  3.969 





11/64  .....................  .172  .......................  4.366 





3/16  ......................  .188  .......................  4.763 





13/64  .....................  .203  .......................  5.159 





7/32  ......................  .219  .......................  5.556 





15/64  .....................  .234  .......................  5.953 





1/4  .......................  .250  .......................  6.350 





17/64  .....................  .266  .......................  6.747 





9/32  ......................  .281  .......................  7.144 





19/64  .....................  .297  .......................  7.541 





5/16  ......................  .313  .......................  7.938 





21/64  .....................  .328  .......................  8.334 





11/32  .....................  .344  .......................  8.731 





23/64  .....................  .359  .......................  9.128 





3/8  .......................  .375  .......................  9.525 





25/64  .....................  .391  .......................  9.992 





13/32  .....................  .406  ......................  10.319 





27/64  .....................  .422  ......................  10.716 





7/16  ......................  .438  ......................  11.113 





29/64  .....................  .453  ......................  11.509 





15/32  .....................  .469  ......................  11.906 





31/64  .....................  .484  ......................  12.303 





1/2  .......................  .500  ......................  12.700 





33/64  .....................  .516  ......................  13.097 





17/32  .....................  .531  ......................  13.494 





35/64  .....................  .547  ......................  13.891 





9/16  ......................  .563  ......................  14.288 





37/64  .....................  .578  ......................  14.684 





19/32  .....................  .594  ......................  15.081 





39/64  .....................  .609  ......................  15.478 





5/8  .......................  .625  ......................  15.875 





41/64  .....................  .641  ......................  16.272 





21/32  .....................  .656  ......................  16.669 





43/64  .....................  .672  ......................  17.066 





11/16  .....................  .687  ......................  17.463 





45/64  .....................  .703  ......................  17.859 





23/32  .....................  .719  ......................  18.256 





47/64  .....................  .734  ......................  18.653 





3/4  .......................  .750  ......................  19.050 





49/64  .....................  .766  ......................  19.447 





25/32  .....................  .781  ......................  19.844 





51/64  .....................  .797  ......................  20.241 





13/16  .....................  .813  ......................  20.638 





53/64  .....................  .828  ......................  21.034 





27/32  .....................  .844  ......................  21.431 





55/64  .....................  .859  ......................  21.828 





7/8  .......................  .875  ......................  22.225 





57/64  .....................  .891  ......................  22.622 





29/32  .....................  .906  ......................  23.019 





59/64  .....................  .922  ......................  23.416 





15/16  .....................  .938  ......................  23.813 





61/64  .....................  .953  ......................  24.209 





31/32  .....................  .969  ......................  24.606 





63/64  .....................  .984  ......................  25.003 





1  .........................  1.000  .....................  25.400 





PRE-ALIGNMENT CHECKS 



1991 Mitsubishi Montero

         Wheel Alignment

         PRE-ALIGNMENT INSPECTION PROCEDURES

         PRE-ALIGNMENT CHECKS

         Before making wheel alignment adjustment, perform the

following checks:

         1) Tires should be equal in size and runout must not be

excessive. Tires and wheels should be in balance, and inflated to

manufacturer’s specifications.

         2) Wheel bearings must be properly adjusted. Steering linkage

and suspension must not have excessive looseness. Check for wear in

tie rod ends and ball joints.

         3) Steering gear box must not have excessive play. Check and

adjust to manufacturer’s specifications.

         4) Vehicle must be at curb height with full fuel load and

spare tire in vehicle. No extra load should be on vehicle.

         5) Vehicle must be level with floor and with suspension

settled. Jounce front and rear of vehicle several times and allow it

to settle to normal curb height.

         6) If steering wheel is not centered with front wheels in

straight-ahead position, correct by shortening one tie rod adjusting

sleeve and lengthening opposite sleeve equal amounts.

         7) Ensure wheel lug nuts are tightened to torque

specifications.

 

 

 

 

 

 

 

Content   ..  169  170  171  172   ..