|
|
SPECIFICATIONS TSB Revision POWER PLANT MOUNT 32-13 2. The bushing should be press-fitted so that the inner pipe projection is at the standard length. Standard value (A): 4.0 ±±±± 0.5 mm (0.16 ±±±± 0.02 inch) SPECIFIC ATIO NS FASTENER TIGHTENING SPECIFICATION M1321004100074 SERVICE SPECIFICATION M1321000300065 AC000310 INNER PIPE A AB ITEMS SPECIFICATIONS Centermember front mounting bolt 93 N ⋅ m (69 ft-lb) Centermember rear mounting bolt 69 − 78 N ⋅ m (51 − 58 ft-lb) Crossmember and stay connecting bolt <2.4L ENGINE> 69 − 78 N ⋅ m (51 − 58 ft-lb) Crossmember mounting bolt 98 − 118 N ⋅ m (72 − 87 ft-lb) Crossmember mounting nut 88 N ⋅ m (657 ft-lb) Dynamic damper bolt <3.0L ENGINE> 4.9 N ⋅ m (43 in-lb) Dynamic damper nut <2.4L ENGINE> 26 N ⋅ m (19 ft-lb) Engine mount bracket bolt 86 N ⋅ m (63 ft-lb) Engine mount bracket nut 86 N ⋅ m (63 ft-lb) Engine mount insulator mounting bolt 83 N ⋅ m (61 ft-lb) Engine mount stay bolt <3.0L ENGINE> 36 N ⋅ m (27 ft-lb) Lower arm and crossmember connecting nut 98 − 118 N ⋅ m (72 − 87 ft-lb) Lower arm clamp bolt 81 N ⋅ m (60 ft-lb) Transaxle and front roll stopper connecting bolt 45 N ⋅ m (33 ft-lb) Transaxle and front roll stopper connecting nut 45 N ⋅ m (33 ft-lb) Transaxle and rear roll stopper connecting bolt 45 N ⋅ m (33 ft-lb) Transaxle and rear roll stopper connecting nut 45 N ⋅ m (33 ft-lb) Transaxle mount bracket nut 57 N ⋅ m (42 ft-lb) Transaxle mount insulator mounting nut 83 N ⋅ m (61 ft-lb) ITEMS STANDARD VALUE Inner pipe projection mm (in) Bushing A 9.0 ± 1.0 (0.35 ± 0.04) Bushing B 4.0 ± 1.0 (0.16 ± 0.04) Bushing C 4.0 ± 0.5 (0.16 ± 0.02) |