Chrysler Crossfire. Manual - part 270

 

  Index      Chrysler     Chrysler Crossfire - service repair manual 2005 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  268  269  270  271   ..

 

 

Chrysler Crossfire. Manual - part 270

 

 

5. Remove the decklid interior trim panel. (Refer to 23

-

BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/

TRIM PANEL - REMOVAL).

6. Remove the retaining screws, and remove the sup-

port bracket (1) from the decklid.

7. Disconnect the Center High Mounted Stop Lamp

(CHMSL) harness connector (1).

8. Remove the attaching screws (2) for the Center

High Mounted Stop Lamp (CHMSL) harness con-
nector (1).

9. Remove the Center High Mounted Stop Lamp

(CHMSL) from the vehicle.

ZH

LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION

8L - 93

INSTALLATION

INSTALLATION - COUPE

1. Insert

the

Center

High

Mounted

Stop

Lamp

(CHMSL) assembly into the liftgate, install the
retaining screws and tighten.

2. Connect the CHMSL harness connector.

3. Install the liftgate interior trim panel. (Refer to 23 -

BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/
TRIM PANEL - INSTALLATION).

4. Connect the negative battery cable.

INSTALLATION - ROADSTER

1. Insert

the

Center

High

Mounted

Stop

Lamp

(CHMSL) assembly into the decklid, install the
retaining screws (2) and tighten.

2. Connect the CHMSL harness connector (1).

8L - 94

LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION

ZH

3. Install the support bracket to the decklid (1).

4. Install the decklid interior trim panel. (Refer to 23 -

BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/
TRIM PANEL - INSTALLATION).

5. Connect the negative battery cable.

FOG LAMP

REMOVAL

1. Disconnect the negative battery cable.

2. Raise and support the vehicle.

3. Rotate the steering wheel fully in one direction and

open the access panel (1) in the front inner fender
liner.

ZH

LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION

8L - 95

4. Remove the fog lamp harness connector (1) from

the fog lamp bulb (2).

5. Rotate the fog lamp bulb (2) counterclockwise and

remove from the fog lamp unit (3).

INSTALLATION

1. Insert and rotate the fog lamp bulb (2) clockwise

into the fog lamp unit (3).

2. Connect the fog lamp harness connector (1) to the

fog lamp bulb (2).

8L - 96

LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION

ZH

 

 

 

 

 

 

 

Content   ..  268  269  270  271   ..