|
|
other on the instrument panel harness has the instrument panel speakers, battery, ground, and CAN. Go to Step 5. Check both the speaker feed (+) circuit and return (-) circuit cavities for the inoperative speaker at the wire har- ness connector for continuity to ground. There should be no continuity. If OK, go to Step 6. If not OK, repair the 6. Disconnect wire harness connector at the inoperative speaker. Check for continuity between the speaker feed (+) circuit cavities of the radio receiver wire harness connector or if equipped, the amplifier wire harness connector REMOVAL FRONT DOOR SPEAKER NOTE: A battery reconnect procedure must be per- (Refer to 8 - ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE). 1. Disconnect and isolate the battery negative cable. 2. Remove front door trim panel (Refer to 23 - BODY/ DOOR - FRONT/TRIM PANEL - REMOVAL). 3. Remove mounting fasteners. 4. Disconnect electrical harness connector and remove speaker. INSTRUMENT PANEL SIDE SPEAKER NOTE: A battery reconnect procedure must be per- (Refer to 8 - ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE). 1. Disconnect and isolate the battery negative cable. 2. Remove speaker cover from instrument panel. 3. Remove mounting fasteners. 4. Disconnect electrical harness connector and remove speaker. 8A - 154 AUDIO/VIDEO - SERVICE INFORMATION LX |