|
|
Content .. 1709 1710 1711 1712 ..
11. If equipped with standard or premium disc brakes, on each rear disc brake: a. While holding guide pins from turning, remove disc brake caliper guide pin bolts (2). b. Remove brake caliper (1) from brake adapter (3) and pads. c. Guide brake caliper up through suspension, fol- lowing brake hose path. Support caliper above CAUTION: When pushing pistons back into caliper 12. If equipped with SRT8 disc brakes, on each rear disc brake, place trim stick (4) between brake pad 13. If equipped with SRT8 disc brakes, on each rear disc brake, using trim stick, slowly apply pressure NOTE: Repeat above procedure to opposite brake 14. If equipped with SRT8 disc brakes, on each rear disc brake, support spring link (1) using a trans- 13 - 44 FRAME & BUMPERS LX |