|
|
Content .. 2063 2064 2065 2066 ..
Fig. 131: View Of Oil Pan Drain Plug & Seal 61. Place a suitable drain pan under the oil pan drain plug. 62. Remove the oil pan drain plug (430). 63. Allow the oil to drain completely. 64. Reinstall and tighten the oil pan drain plug. Tighten: Tighten the drain plug to 25 N.m (18 lb ft).
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
65. Remove the catalytic converter. Refer to one of the following procedures: Catalytic Converter Replacement (4.3L) or Catalytic Converter Replacement Catalytic Converter Replacement - Left Side (6.0L - Cab/Chassis) for the 2500 Exhaust Manifold Pipe Replacement (6.0L - Cab/Chassis) for the 2500 series
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 132: View Of Flywheel To Torque Converter Bolts 66. Remove the flywheel to torque converter bolts.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 133: View Of Fuel/Evaporative Emission Pipe & Bracket 67. Remove the fuel/evaporative emission (EVAP) pipe bracket nut from the transmission stud (typical installation shown). 68. Remove the fuel/EVAP pipe bracket from the stud. Reposition the bracket out of the way.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 2063 2064 2065 2066 ..
|
|
|