|
|
Content .. 2005 2006 2007 2008 ..
Fig. 382: View Of Oil Filter Fitting 1. Install the oil filter adapter (438). Tighten: Tighten the adapter to 55 N.m (40 lb ft). NOTE: Refer to Fastener Notice .
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 383: View Of Engine Oil Filter 2. Lubricate the oil filter seal with clean engine oil. 3. Install the oil filter (437). Tighten: Tighten the filter to 30 N.m (22 lb ft).
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 384: View Of Oil Pan Skid Plate & Bolts 4. For 2500 series vehicles, position the oil pan skid plate and tighten until snug the 2 rear oil pan skid plate bolts, install the 2 front oil pan skid plate bolts, if equipped. Tighten: Tighten the bolts to 28 N.m (21 lb ft).
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 385: View Of Oil Pan Skid Plate & Bolts 5. For 1500 series vehicles, position the oil pan skid plate and install the oil pan skid plate bolts, if equipped. Tighten: Tighten the bolts to 28 N.m (21 lb ft). 6. Lower the vehicle. 7. Refill the engine oil. Refer to Approximate Fluid Capacities and/or Fluid and Lubricant Recommendations . 8. Start the engine and inspect for leaks. OIL PAN COVER REPLACEMENT
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 2005 2006 2007 2008 ..
|
|
|