|
|
Content .. 1636 1637 1638 1639 ..
Fig. 98: View Of Turbocharger Bypass Valve & Washer 5. Remove the turbocharger bypass valve and washer. Installation Procedure
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 99: View Of Turbocharger Bypass Valve & Washer 1. Install the turbocharger bypass valve and washer. Tighten: Tighten the valve to 60 N.m (44 lb ft). NOTE: Refer to Fastener Notice .
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 100: View Of Turbocharger Coolant Inlet Hose 2. Connect the turbocharger coolant inlet hose to the turbocharger bypass valve. 3. Position the coolant inlet hose clamp. 4. Fill the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) or Cooling System Draining and Filling (Static Fill). 5. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement . TURBOCHARGER COOLANT HOSES/PIPES REPLACEMENT (LMM - INLET PIPE)
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Removal Procedure 1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement . 2. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement . 3. Drain the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) or Cooling System Draining and Filling (Static Fill). 4. Remove the charged air cooler outlet pipe from the turbocharger and the charged air cooler. Refer to Charge Air Cooler Outlet Pipe Replacement . IMPORTANT: After removing the charged air cooler duct, cover the turbocharger opening with tape in order to prevent entry of
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 1636 1637 1638 1639 ..
|
|
|