|
|
Content .. 1449 1450 1451 1452 ..
The tester displays the air pump pressure (AIR PMP PRS (A) and AIR PMP2 PRS (A)) as absolute pressure. NOTICE: When applying pressure, make sure that no foreign matter enters the sensor. (f) Check the power source voltage. (1) Disconnect the connector. (2) Measure the voltage according to the value(s) in the table below. Standard Voltage: TESTER CONNECTION CONDITION SPECIFIED CONDITION D58-2 (VC) - D58-4 (E2) Ignition switch ON 4.75 to 5.25 V D59-2 (VC2) - D59-4 (E22) 3UR-FBE EMISSION CONTROL: EMISSION CONTROL SYSTEM:... |