|
|
4. Insert the mechanical key and push down the shift lock release. 5. Push the shift lever button and move the shift lever to the N (Neutral) position while holding down the shift lock release. Place the ignition switch in the ON posi- tion. The vehicle may be moved to the desired location. cover after the operation. the P (Park) position, have the CVT system checked as soon as possible. It is recom- mended you visit a NISSAN dealer for this service. WARNING If the shift lever cannot be moved from the P (Park) position while the engine is running and the brake pedal is depressed, the stop lights may not work. Malfunctioning stop lights could cause an accident injur- ing yourself and others. MANUAL TRANSMISSION (MT) WARNING . Do not downshift abruptly on slippery roads. This may cause a loss of control. . Do not over-rev the engine when shifting to a lower gear. This may cause a loss of control or engine damage. . When the high fluid temperature protection mode or fail-safe op- eration occurs, vehicle speed may be gradually reduced. The re- duced speed may be lower than other traffic, which could increase the chance of a collision. Be especially careful when driving. If necessary, pull to the side of the road at a safe place and allow the transmission to return to normal operation, or have it repaired if necessary. CAUTION . Do not rest your foot on the clutch pedal while driving. This may damage the clutch. . Fully depress the clutch pedal before shifting to help prevent transmission damage. . Stop your vehicle completely be- fore shifting into R (Reverse). . When the vehicle is stopped for a period of time, for example at a stop light, shift to N (Neutral) and release the clutch pedal with the foot brake applied. Starting and driving 5-25 |