|
|
JVI1617X Example Headlight beam select To select the high beam function, push the lever forward. The high beam lights come on and the light illuminates. Pull the lever back to select the low beam. headlight high beams on and off. High beam assist The high beam assist system will operate when the vehicle is driven at speeds of approximately 19 MPH (30 km/h) and above. If an oncoming vehicle or leading vehicle appears in front of your vehicle when the headlight high beam is on, the headlight will be switched to the low beam automatically. Precautions on high beam assist: WARNING . The high beam assist system is a convenience but it is not a sub- stitute for safe driving operation. The driver should remain alert at all times, ensure safe driving practices and switch the high beams and low beam manually when necessary. . The high beam or low beam may not switch automatically under the following conditions. Switch the high beam and low beam manually. snow, wind, etc.). — When a light source similar to a headlight or tail light is in the vicinity of the vehicle. — When the headlights of the oncoming vehicle or the lead- ing vehicle are turned off, when the color of the light is affected due to foreign mate- rials on the lights, or when the light beam is out of position. — When there is a sudden, con- tinuous change in brightness. — When driving on a road that passes over rolling hills, or a road that has level differ- ences. — When driving on a road with many curves. — When a sign or mirror-like surface is reflecting intense light towards the front of the vehicle. — When the container, etc. being towed by a leading vehicle is reflecting intense light. — When a headlight on your vehicle is damaged or dirty. — When the vehicle is leaning at an angle due to a punctured tire, being towed, etc. Instruments and controls 2-55 |