Nissan Qashqai (2022 year). Manual in english - page 8

 

  Index      Manuals     Nissan Qashqai (2022 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     6      7      8      9     ..

 

 

 

Nissan Qashqai (2022 year). Manual in english - page 8

 

 

WAC0177X

Instruments and controls

2-39

-------------------------------------------------------------------------------------------------------------------------------------------------------------

2-40

Instruments and controls

JVI1566X

TRIP COMPUTER

The trip computer display can be chan-

ged using the buttons OK ,

,

,

and

located on the steering

wheel.

OK - change or select an item in the

vehicle information display

- navigate through the items in vehi-

cle information display

- go back to the previous menu

- change from one display screen

to the next

1. Safety Shield

The safety shield mode shows the oper-

ating condition for the following systems.

.

Lane Departure Warning (LDW)

.

Intelligent Lane Intervention (I-LI)

.

Blind Spot Warning (BSW)

.

Automatic Emergency Braking (AEB)

with Pedestrian Detection system

For more details, see “Lane Departure

Warning (LDW)” (P.5-35), “Intelligent Lane

Intervention (I-LI)” (P.5-40), “Blind Spot

Warning (BSW)” (P.5-46) or “Automatic

Emergency Braking (AEB) with Pedestrian

Detection system” (P.5-97).

2. Average speed 1 and 2 (MPH or

km/h)

The average speed 1 mode shows the

average vehicle speed since the last reset.

The average speed 2 mode shows the

average vehicle speed since the time the

ignition switch was turned ON. The aver-

age speed 2 is automatically reset each

time the ignition is placed in the OFF

position.
Resetting is done by pushing the OK

button. When the OK

button is pushed,

the following menu items are displayed.

.

Cancel
— Return to the previous screen with-

out resetting.

.

Average Speed
— Reset the average speed.

.

All
— Reset all items of “Average Speed”,

“Elapsed time and trip odometer”

and “Fuel economy.”

Once the “Average speed 1” is displayed,

you can use

buttons to switch

between the “Average speed 1” and “Aver-

age speed 2.”
The display is updated every 30 seconds.

The first 30 seconds after a reset, the

display shows “——”.

3. Elapsed time and trip odometer 1

and 2 (mile or km)

Elapsed time:

The elapsed time mode 1 shows the time

since the last reset. The elapsed time 2

mode shows the time since the ignition

switch was turned ON. (The trip odometer

is also reset at the same time.)

Trip odometer:

The trip odometer 1 mode shows the total

distance the vehicle has been driven since

the last reset. The trip odometer 2 mode

shows the total distance the vehicle has

-------------------------------------------------------------------------------------------------------------------------------------------------------------

been driven since the time the ignition

switch was placed in the ON position. (The

elapsed time is also reset at the same

time.)
The elapsed time and trip odometer 2 is

automatically reset each time the ignition

is placed in the OFF position.
Resetting is done by pushing the OK

button. When the OK

button is pushed,

the following menu items are displayed.

.

Cancel
— Return to the previous screen with-

out resetting.

.

Distance
— Reset the elapsed time and trip

odometer.

.

All
— Reset all items of “Average Speed”,

“Elapsed time and trip odometer”

and “Fuel economy.”

Once the “Elapsed time and trip odometer

1” is displayed, you can use

buttons

to switch between the “Elapsed time and

trip odometer 1” and “Elapsed time and

trip odometer 2.”

4-5. Fuel economy/ECO pedal

guide

Current fuel consumption:

The current fuel consumption mode

shows the current fuel consumption.

Average fuel consumption:

The average fuel consumption 1 mode

shows the average fuel consumption

since the last reset. The average fuel

consumption 2 mode shows the average

fuel consumption since the time the

ignition switch was placed in the ON

position. The average fuel consumption

2 is automatically reset each time the

ignition is placed in the OFF position.
Resetting is done by pushing the OK

button. When the OK

button is pushed,

the following menu items are displayed.

.

Cancel
— Return to the previous screen with-

out resetting.

.

Fuel Economy
— Reset the fuel economy.

.

All
— Reset all items of “Average Speed”,

“Elapsed time and trip odometer”

and “Fuel economy”.

Once the “Fuel economy 1” is displayed,

you can use

buttons to switch

between the “Fuel economy 1” and “Fuel

economy 2”.
The display is updated every 30 seconds.

For about the first 1/3 mile (500 m) after a

reset, the display shows “——”.

6. Audio

The audio mode shows the status of

audio information.

7. Navigation (if so equipped)

When the route guidance is set in the

navigation system, this item shows the

navigation route information.

8. Compass (if so equipped)

This display indicates the heading direc-

tion of the vehicle.

9. Intelligent 4x4 torque distribution

display (if so equipped)

When the Intelligent 4x4 torque distribu-

tion display is selected, you can view the

distribution ratio of the transmission

torque to the front and rear wheels

during driving.

Instruments and controls

2-41

-------------------------------------------------------------------------------------------------------------------------------------------------------------

2-42

Instruments and controls

10. Chassis control

When Intelligent Trace Control, Intelligent

Engine Brake (Continuously Variable

Transmission (CVT) models) or Active Ride

Control system is operated, it shows the

operating condition. It also shows oper-

ating condition of Hill Start Assist. The

operating condition of the automatic

brake hold function (if so equipped) is

also shown. See “Intelligent Trace Control”

(P.5-133), “Intelligent Engine Brake (Con-

tinuously Variable Transmission (CVT)

models)” (P.5-134), “Active Ride Control”

(P.5-135), “Hill Start Assist system” (P.5-136)

or “Automatic brake hold” (P.5-29) for

more details.

11. Tire Pressures

The tire pressure mode shows the pres-

sure of all four tires while the vehicle is

driven.
When the Tire Pressure Low — Add Air

warning appears, the display can be

switched to the tire pressure mode by

pushing the OK

button to reveal addi-

tional details on the displayed warning.

12. Intelligent Driver Alertness (I-DA)

system (if so equipped)

When the “Driver Attention” display is

selected, you can view your attention

level as detected by the system. (See

“Intelligent Driver Alertness (I-DA)” (P.5-

94).)

13. Traffic Sign Recognition (if so

equipped)

The Traffic Sign Recognition (TSR) system

provides the driver with information

about the most recently detected speed

limit. See “Traffic Sign Recognition” (P.2-

43) for more details.

JVI0932X

CLOCK AND OUTSIDE AIR TEM-

PERATURE

The clock

and outside air temperature

are displayed on the upper side of the

vehicle information display.

Clock

For clock adjustment, see “Clock” (P.2-22)

or the separate NissanConnect® Owner’s

Manual (if so equipped).

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Outside air temperature (°F or °C)

The outside air temperature is displayed

in °F or °C in the range of −40 to 140°F (−40

to 60°C).
The outside air temperature mode in-

cludes a low temperature warning fea-

ture. If the outside air temperature is

below 37°F (3°C), the warning

is dis-

played (if so equipped).
The outside temperature sensor is lo-

cated in front of the radiator. The sensor

may be affected by road or engine heat,

wind directions and other driving condi-

tions. The display may differ from the

actual outside temperature or the tem-

perature displayed on various signs or

billboards.

WAC0198X

TRAFFIC SIGN RECOGNITION (if so

equipped)

The Traffic Sign Recognition (TSR) system

provides the driver with information

about the most recently detected speed

limit. The system captures the road sign

information with the multi-sensing front

camera unit

located on the windshield

in front of the inside rearview mirror and

displays the detected signs in the vehicle

information display. For vehicles

equipped with Navigation System, the

speed limit displayed is based on a

combination of Navigation System data

and live camera recognition. TSR informa-

tion is always displayed at the top of the

vehicle information display, and option-

ally in the main central area of the display

screen.

WARNING

The TSR system is only intended to

be a support device to provide the

driver with information. It is not a

replacement for the driver’s atten-

tion to traffic conditions or respon-

sibility to drive safely. It cannot

prevent accidents due to careless-

ness. It is the driver’s responsibility

to stay alert and drive safely at all

times.

System operation

The traffic recognition system displays

the following types of road sign:

Instruments and controls

2-43

-------------------------------------------------------------------------------------------------------------------------------------------------------------

2-44

Instruments and controls

WAC0214X

WAC0215X

Latest detected speed limit
Reduce speed limit caution (orange)
No speed limit information
No-overtaking zone
Reduce speed limit caution (with no

speed limit information) (orange)

CAUTION

.

The Traffic Sign Recognition (TSR)

system is intended as an aid to

careful driving. It is the driver’s

responsibility to stay alert, drive

safely, and observe all road reg-

ulations that currently apply, in-

cluding looking out for road

signs.

.

The Traffic Sign Recognition (TSR)

system may not function prop-

erly under the following condi-

tions:
— When rain, snow or dirt ad-

heres to the windshield in

front of the TSR camera unit.

— When the headlights are not

bright due to dirt on the lens

or if the aiming is not adjusted

properly.

— When strong light enters the

camera unit. (For example, the

light directly shines on the

front of the vehicle at sunrise

or sunset.)

— When a sudden change in

brightness occurs. (For exam-

ple, when the vehicle enters or

exits a tunnel or under a

bridge.)

— In areas not covered by the

Navigation System.

— If there are deviations in rela-

tion to the navigation, for ex-

ample due to changes in the

road routing.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

— When overtaking buses or

trucks with speed stickers.

Turning the TSR system on and off

Turning the TSR system on or off is done

using the "Settings" menu in the vehicle

information display. For details, see “Ve-

hicle information display” (P.2-19).
Perform the following steps to enable or

disable the TSR system:
1. In the "Settings" menu, select the

"Driver Assistance" key.

2. Touch "Speed Limit Sign" to turn the

system ON/OFF.

System temporarily unavailable

If the vehicle is parked in direct sunlight

under high temperature conditions (over

approximately 40°C (104°F)) and then

started, the TSR system may be deacti-

vated automatically. The “Unavailable:

high cabin temperature” warning mes-

sage will appear in the vehicle informa-

tion display.

Action to take:

When the interior temperature is reduced,

the TSR system will resume operating

automatically.

System Malfunction

If the TSR system malfunctions it will be

turned off automatically and the TSR

"Malfunction" warning message will ap-

pear in the vehicle information display.

Action to take:

If the TSR "Malfunction" warning mes-

sage appears, pull off the road at a safe

location and stop the vehicle. Turn the

engine off and restart the engine. If the

TSR "Malfunction" message continues to

appear, have the system checked by a

NISSAN dealer.

Maintenance

The TSR uses the same multi-sensing

front camera unit that is used by the

Lane Departure Warning (LDW) system,

located in front of the interior rearview

mirror. For maintenance of the camera,

see “System maintenance” (P.5-39).

JVI1587X

Your vehicle has two types of security

systems, as follows:

.

Vehicle security system

.

NISSAN Vehicle Immobilizer System

The security condition will be shown by

the security indicator light.

VEHICLE SECURITY SYSTEM

The vehicle security system provides

visual and audio alarm signals if someone

opens the doors, hood (if so equipped)

and liftgate when the system is armed. It

is not, however, a motion detection type

system that activates when a vehicle is

moved or when a vibration occurs.
The system helps deter vehicle theft but

Instruments and controls

2-45

SECURITY SYSTEMS

-------------------------------------------------------------------------------------------------------------------------------------------------------------

2-46

Instruments and controls

cannot prevent it, nor can it prevent the

theft of interior or exterior vehicle com-

ponents in all situations. Always secure

your vehicle even if parking for a brief

period. Never leave your keys in the

vehicle, and always lock it when unat-

tended. Be aware of your surroundings,

and park in secure, well-lit areas when-

ever possible.
Many devices offering additional protec-

tion, such as component locks, identifica-

tion markers, and tracking systems, are

available at auto supply stores and speci-

alty shops. Your NISSAN dealer may also

offer such equipment. Check with your

insurance company to see if you may be

eligible for discounts for various theft

protection features.

SIC2045

How to arm the vehicle security

system

1. Close all windows.

The system can be

armed even if the windows are open.

2. Remove the keys from the vehicle.
3. Close all doors, hood (if so equipped)

and liftgate. Lock all doors. The doors

can be locked with the key fob (if so

equipped), Intelligent Key (if so

equipped), the request switch (if so

equipped), or power door lock switch.

4. Confirm that the security indicator

light stays on for about 30 seconds.

The vehicle security system is now

pre-armed. The vehicle security sys-

tem will automatically shift into the

armed phase. The security light begins

to flash once every three seconds. If

during the pre-armed phase one of

the following occurs, the system will

not arm:

.

Any door is unlocked with the key

fob (if so equipped), the Intelligent

Key (if so equipped), or the request

switch (if so equipped).

.

Ignition switch is placed in the ON

position.

Even when the driver and/or passen-

gers are in the vehicle, the system will

activate with all the doors, hood (if so

equipped) and liftgate locked with the

ignition switch placed in the LOCK posi-

tion. When placing the ignition switch in

the ON position, the system will be

released.

Vehicle security system activation

The vehicle security system will give the

following alarm:

.

The headlights blink and the horn

sounds intermittently.

.

The alarm automatically turns off

after approximately 50 seconds. How-

ever, the alarm reactivates if the

vehicle is tampered with again.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The alarm is activated by:

.

Opening any doors, the hood (if so

equipped) or liftgate without using the

key or Intelligent Key (even if the door

is unlocked by releasing the door

inside lock knob or using the mechan-

ical key).

How to stop an activated alarm

The alarm stops only by unlocking a door

or the liftgate by pushing the UNLOCK

button on the key fob (if so equipped)

or the Intelligent Key (if so equipped), or

pushing the request switch (if so

equipped) on the driver’s or passenger’s

door in range of the door handle.

If the Intelligent Key battery is dis-
charged:

If the Intelligent Key battery is discharged,

the alarm will not stop by pushing the

UNLOCK

button on the key fob (if so

equipped) or the Intelligent Key (if so

equipped), or pushing the request switch

(if so equipped) on the driver’s or passen-

ger’s door in range of the door handle. In

such a case, unlock the driver’s door

using the mechanical key and touch the

ignition switch with the Intelligent Key to

stop the alarm. (See “Intelligent Key bat-

tery discharge” (P.5-17).)

NISSAN VEHICLE IMMOBILIZER SYS-

TEM

The NISSAN Vehicle Immobilizer System

will not allow the engine to start without

the use of the registered key.
If the engine fails to start using the

registered key, it may be due to inter-

ference caused by another registered key,

an automated toll road device or auto-

mated payment device on the key ring.

Restart the engine using the following

procedures:
1. Leave the ignition switch in the ON

position for approximately 5 seconds.

2. Place the ignition switch in the OFF or

LOCK position and wait approximately

10 seconds.

3. Repeat step 1 and 2 again.
4. Restart the engine while holding the

device (which may have caused the

interference) separate from the regis-

tered key.
If this procedure allows the engine to

start, NISSAN recommends placing the

registered key on a separate key ring

to avoid interference from other de-

vices.

Statement related to section 15 of FCC

rules for NISSAN Vehicle Immobilizer

System (CONT ASSY-BCM. ANT ASSY-

IMMOBILISER)
FCC Notice:
For USA:
This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference,

and (2) this device must accept any

interference received, including inter-

ference that may cause undesired op-

eration.
Note: Changes or modifications not

expressly approved by the party re-

sponsible for compliance could void

the user’s authority to operate the

equipment.
For Canada:
This device complies with Industry Ca-

nada licence-exempt RSS standard(s).

Operation is subject to the following

two conditions: (1) this device may not

cause interference, and (2) this device

must accept any interference, including

interference that may cause undesired

operation of the device.

Instruments and controls

2-47

-------------------------------------------------------------------------------------------------------------------------------------------------------------

2-48

Instruments and controls

SIC2045

Security indicator light

The security indicator light blinks when-

ever the ignition switch is placed in the

OFF or LOCK position.
This function indicates the NISSAN Vehi-

cle Immobilizer System is operational.
If the NISSAN Vehicle Immobilizer System

is malfunctioning, the light will remain on

while the ignition switch is placed in the

ON position.

If the light still remains on and/or the

engine will not start, seek service for

the NISSAN Vehicle Immobilizer System

as soon as possible. Please bring all

registered keys that you have. It is

recommended you visit a NISSAN dealer

for this service.

WARNING

In freezing temperatures the washer

solution may freeze on the wind-

shield and obscure your vision which

may lead to an accident. Warm wind-

shield with the defroster before you

wash the windshield.

CAUTION

.

Do not operate the washer con-

tinuously for more than 30 sec-

onds.

.

Do not operate the washer if the

reservoir tank is empty.

.

Do not fill the window washer

reservoir tank with washer fluid

concentrates at full strength.

Some methyl alcohol based

washer fluid concentrates may

permanently stain the grille if

spilled while filling the window

washer reservoir tank.

.

Pre-mix washer fluid concen-

trates with water to the manu-

facturer’s recommended levels

before pouring the fluid into the

window washer reservoir tank. Do

WIPER AND WASHER SWITCH

-------------------------------------------------------------------------------------------------------------------------------------------------------------

not use the window washer re-

servoir tank to mix the washer

fluid concentrate and water.

If the windshield wiper operation is

interrupted by snow or ice, the wiper

may stop moving to protect its motor. If

this occurs, turn the wiper switch to the

OFF position and remove the snow or

ice that is on and around the wiper

arms. In approximately 1 minute, turn

the switch on again to operate the

wiper.

JVI0863X

WINDSHIELD WIPER AND WASHER

OPERATION

The windshield wiper and washer oper-

ates when the ignition switch is in the ON

position.
Push the lever down to operate the wiper

at the following speed:

Intermittent — intermittent operation can

be adjusted by turning the knob toward

(Slower) or

(Faster). Also, the inter-

mittent operation speed varies in accor-

dance with the vehicle speed. (For

example, when the vehicle speed is high,

the intermittent operation speed will be

faster.)
Low — continuous low speed operation

High — continuous high speed operation

Push the lever up

to have one sweep

operation of the wiper.
Pull the lever toward you

to operate the

washer. Then the wiper will also operate

several times.
After a short delay, the drip wipe function

will operate the wiper once more to clear

remaining windshield-washer fluid from

the windshield.

NOTE:
The Speed Dependent feature and Drip

Wipe feature may be disabled. For

additional information, refer to “Vehicle

information display” (P.2-19) in this sec-

tion.

Instruments and controls

2-49

-------------------------------------------------------------------------------------------------------------------------------------------------------------

2-50

Instruments and controls

WARNING

In freezing temperatures the washer

solution may freeze on the rear

window glass and obscure your vi-

sion. Warm the rear window with the

defroster before you wash the rear

window.

CAUTION

.

Do not operate the washer con-

tinuously for more than 30 sec-

onds.

.

Do not operate the washer if the

reservoir tank is empty.

.

Do not fill the window washer

reservoir tank with washer fluid

concentrates at full strength.

Some methyl alcohol based

washer fluid concentrates may

permanently stain the grille if

spilled while filling the window

washer reservoir tank.

.

Pre-mix washer fluid concen-

trates with water to the manu-

facturer’s recommended levels

before pouring the fluid into the

window washer reservoir tank. Do

not use the window washer re-

servoir tank to mix the washer

fluid concentrate and water.

If the rear window wiper operation is

interrupted by snow or ice, the wiper

may stop moving to protect its motor. If

this occurs, turn the wiper switch to the

OFF position and remove the snow or

ice that is on and around the wiper

arms. In approximately 1 minute, turn

the switch on again to operate the

wiper.

JVI0867X

The rear window wiper and washer

operate when the ignition switch is in

the ON position.
Turn the switch clockwise from the OFF

position to operate the wiper.

Intermittent (INT) — intermittent opera-

tion (not adjustable)
Low (ON) — continuous low speed opera-

tion

Push the switch forward

to operate the

washer. Then the wiper will also operate

several times.

REAR WINDOW WIPER AND

WASHER SWITCH

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Reverse Link feature:

When the windshield wiper switch is on,

moving the shift lever to the R (Reverse)

position will operate the rear window

wiper.

NOTE:
The Reverse Link feature may be dis-

abled. For additional information, refer

to “Vehicle information display” (P.2-19).
Wiper drip wipe system:

The wiper will also operate once about 3

seconds after the washer and wiper are

operated. This operation is to wipe

washer fluid that has dripped on the

windshield.

JVI0852X

Type A

JVI0853X

Type B

To defog/defrost the rear window glass

and outside mirrors (if so equipped), start

the engine and push the switch on. The

indicator light

will illuminate. Push the

switch again to turn the defroster off.
It will automatically turn off in approxi-

mately 15 minutes.

CAUTION

When cleaning the inner side of the

rear window, be careful not to

scratch or damage the rear window

defroster.

Instruments and controls

2-51

REAR WINDOW AND OUTSIDE

MIRROR DEFROSTER SWITCH

-------------------------------------------------------------------------------------------------------------------------------------------------------------

2-52

Instruments and controls

JVI1616X

HEADLIGHT SWITCH
Lighting

Type A:

WAC0411X

Type B:

Rotate the switch to the

position, and

the front parking, tail, license plate, and

instrument panel lights will come on. The

Intelligent Auto Headlight system will be

set (Type B).
Rotate the switch to the

position, and

the headlights will come on and all the

other lights remain on.

JVI1624X

Intelligent Auto Headlight system

Type A:

The Intelligent Auto Headlight system

allows the headlights to be set so they

turn on and off automatically.
To set the Intelligent Auto Headlight

system:
1. Make sure the headlight switch is in

the AUTO position

.

2. Place the ignition switch in the ON

position.

3. The Intelligent Auto Headlight system

automatically turns the headlights on

and off.

HEADLIGHT AND TURN SIGNAL SWITCH

-------------------------------------------------------------------------------------------------------------------------------------------------------------

To turn the Intelligent Auto Headlight

system off, turn the switch to the OFF,

or

position.

The Intelligent Auto Headlight system can

turn on the headlights automatically

when it is dark and turn off the headlights

when it is light.
The headlights will also be turned on

automatically at twilight or in rainy

weather (when the windshield wiper is

operated continuously).
If the ignition switch is placed in the OFF

position and one of the doors is opened

and this condition is continued, the head-

lights remain on for 5 minutes.

WAC0412X

Type B:

The Intelligent Auto Headlight system

allows the headlights to be set so they

turn on and off automatically.
To set the Intelligent Auto Headlight

system:
1. Make sure the headlight switch is in

the AUTO position

or

position .

2. Place the ignition switch in the ON

position.

3. The Intelligent Auto Headlight system

automatically turns the headlights on

and off.

To turn the Intelligent Auto Headlight

system off, turn the switch to the

position.
The Intelligent Auto Headlight system can

turn on the headlights automatically

when it is dark and turn off the headlights

when it is light.
The headlights will also be turned on

automatically at twilight or in rainy

weather (when the windshield wiper is

operated continuously).
If the ignition switch is turned to the ON

position when the parking brake is ap-

plied, the headlights remain off.
With the

position selected, the head-

lights turn off when the ignition switch is

placed in the OFF position, the shift lever

is in the P (Park) position, or the parking

brake is applied. (The front parking, tail,

license plate, and instrument lights are

on.)
How to turn off all lights:
With the AUTO position selected, all lights

turn off when the engine is restarted after

the parking brake is applied.

NOTE:
When driving at night, the headlights

remain on and cannot be turned off.
When the vehicle is stopped, the head-

lights can be turned off when the head-

light switch is in the

position.

With the AUTO position selected (head-

Instruments and controls

2-53

-------------------------------------------------------------------------------------------------------------------------------------------------------------

2-54

Instruments and controls

lights are on), the headlights will remain

on for 5 minutes when the ignition switch

is placed in the OFF position and one of

the doors is opened.

JVI0510X

Be sure not to put anything on top of

the photo sensor

located on the top

of the instrument panel. The photo

sensor controls the Intelligent Auto

Headlight; if it is covered, the photo

sensor reacts as if it is dark and the

headlights will illuminate.
Automatic headlights off delay:

You can keep the headlights on for up to

180 seconds after you place the ignition

switch in the OFF and open any door then

close all the doors. You can adjust the

period of the automatic headlights off

delay from 0 seconds (OFF) to 180 sec-

onds. The factory default setting is 45

seconds.

For automatic headlights off delay

setting, see “Vehicle Settings” (P.2-23).

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     6      7      8      9     ..