Nissan Quest (2017 year). Instruction

JVH0174X

ON·OFF button/VOL (volume) control knob

Radio station preset buttons

AUDIO control button/Radio tuning/FOLDER
selector knob

FM·AM band select button

Radio SCAN (tuning) button

Radio CAT (category)/REW (rewind) button for
SEEK/TRACK

XM button

FF (fast forward) button for SEEK/TRACK

RPT (repeat)/RDM (random) play button

10.

DISC·AUX button

FM-AM-SAT RADIO WITH COMPACT
DISC (CD) PLAYER (Type B)

For all operation precautions, see “Audio opera-
tion precautions” (P.4-61).

The satellite radio mode requires an active
SiriusXM Satellite Radio subscription. The sa-
tellite radio is not available in Alaska, Hawaii and
Guam.

It may take some time to receive the activation
signal after subscribing the SiriusXM Satellite
Radio. After receiving the activation signal, an
available channel list will be automatically
updated in the radio. Push the ignition switch
from LOCK to ACC to update the channel list.

Audio main operation

Head unit:

The auto loudness circuit enhances the low and
high frequency ranges automatically in both
radio reception and CD playback.

ON·OFF/Volume control:

Push the ignition switch to the ACC or ON
position, and then push the ON·OFF button
while the system is off to turn on the last audio
source, which was playing immediately before
the system was turned off. While the system is
on, pushing the ON·OFF button turns the system
off.

Monitor, heater, air conditioner, audio, phone and voice recognition systems

4-87

4-88

Monitor, heater, air conditioner, audio, phone and voice recognition systems

Turn the VOL control knob to adjust the volume.

Adjusting tone quality and speaker bal-
ance:

To adjust Bass, Treble, Balance and Fade, push
the Audio control knob. When the display shows
the setting you want to change (Bass, Treble,
Balance and Fade), rotate the Audio control
knob to set the desired setting. For the other
setting methods, see “How to use SETTING
button” (P.4-15).

This vehicle has some sound effect functions as
follows:
. Speed Sensitive Vol.
For more details, see “Vehicle information and
settings (models with center multi-function
control panel)” (P.4-10).

Switching the display:

Pushing the DISC·AUX button will switch the
displays as follows:

iPod

/USB

? CD/DVD ? Bluetooth

Audio (if

so equipped)

? AUX ? iPod

/USB

FM-AM-SAT radio operation

When the radio band select button is pushed
while the ignition switch is in the ACC or ON
position, the radio will come on at the channel
last played.

The last channel played will also come on when
the ON·OFF button is pushed to ON.

If another audio source is playing when the radio
band select button is turned on, the audio
source will automatically be turned off and the
last radio channel played will come on.

When the stereo broadcast signal is weak, the
radio will automatically change from stereo to
monaural reception.

radio (FM/AM) band select:

Pushing the radio band select button will
change the band as follows:

? FM1 ? FM2 ? AM

radio (SAT) band select:

Pushing the radio band select button will
change the band as follows:

XM1

? XM2 ? XM3 ? XM1

The satellite radio is not available in Alaska,
Hawaii and Guam.

TUNE (Tuning):
. For AM and FM radio

Turn the radio TUNE knob for manual tuning.

. For SiriusXM Satellite Radio

Turn the radio TUNE knob to seek channels
from all of the categories when any category
is not selected.

SEEK tuning/CATE-

GORY (CAT):
. For AM and FM radio

Push the SEEK button

to tune

from low to high or high to low frequencies
and to stop at the next broadcasting station.

. For SiriusXM Satellite Radio

Push the SEEK button

to tune

to the first channel of the next or previous
category.

During satellite radio reception, the following
notices will be displayed under certain condi-
tions.
. NO SIGNAL (No signal is received while the

SAT tuner is connected.)

. OFF AIR (Broadcasting signed off)
. CHECK ANTENNA (Antenna connection

error)

. LOADING (When the initial setting is

performed)

. UPDATING (When the satellite radio sub-

scription is not active)

SCAN tuning:

Push the SCAN tuning button to tune from low
to high frequencies and stop at each broad-
casting station/channel for 5 seconds. Pushing
the button again during this 5 seconds period
will stop SCAN tuning and the radio will remain
tuned to that station/channel.

If the SCAN tuning button is not pushed within 5
seconds, SCAN tuning moves to the next
station/channel.

Station memory operations:

12 stations/channels can be set for the FM band
(6 each for FM1 and FM2), 18 for SiriusXM
Satellite Radio (6 each for XM1, XM2 and XM3)
and 6 stations can be set for the AM band.

1. Choose the radio band using the radio band

select button.

2. Tune to the desired station/channel using

the SEEK/TRACK, SCAN button or the
radio TUNE knob.

3. Push and hold the desired station preset

button

until the radio mutes.

4. The station indicator will then come on and

the sound will resume. Memorizing is now
complete.

5. Other buttons can be set in the same

manner.

If the battery cable is disconnected, or if the fuse
opens, the radio memory will be erased. In that
case, reset the desired stations/channels.

List (AM and FM radio) (models with
navigation system):

When the “List” key on the display is selected
while the FM or AM radio is being played, the
preset station list will be displayed.

If 1 of the 6 preset stations listed is touched and
held, the current station will be stored as the
new preset.

Menu (SiriusXM Satellite Radio):

When the “Menu” key on the display is selected
while the SiriusXM Satellite Radio is being
played, the menu list will be displayed.

The following items are available.
. Preset List

Displays the preset channel list. If 1 of the 6
preset stations listed is touched and held,
the current station will be stored as the new
preset.

. Customize Channel List

Selects specific channels to skip while using
the TUNE, SEEK/CATEGORY or Menu-
Categories feature.

. Favorite Artists & Songs

Stores the current artist or song that is being
played. Touch the “Alert” key to be reminded
when the stored artist or song is playing on a
station while listening to SiriusXM Satellite
Radio.

. Categories

Selecting a category will go to the first
channel in that category as defined by
SiriusXM Satellite Radio.

. Direct Tune

Inputs the channel number by using a
keypad.

Text (models without navigation system):

When the “Text” key is selected with the multi-
function controller on the display and then the
ENTER button is pushed while the satellite radio
is being played, the text information listed below
will be displayed on the screen.
. CH Name
. Category
. Name
. Title
. Other

Monitor, heater, air conditioner, audio, phone and voice recognition systems

4-89

4-90

Monitor, heater, air conditioner, audio, phone and voice recognition systems

SAA3607

Compact Disc (CD) player operation

The CD slot is located on the instrument lower
panel.

Push the ignition switch to the ACC or ON
position and insert the Compact Disc (CD) into
the slot with the label side facing up. The CD will
be guided automatically into the slot and start
playing.

After loading the CD, the number of tracks on
the CD and the play time will appear on the
display.

If the radio is already operating, it will auto-
matically turn off and the CD will play.

If the system has been turned off while the CD

was playing, pushing the ON·OFF button will
start the CD.

Do not use 3.1 in (8 cm) discs.

PLAY:

When the DISC·AUX button is pushed with the
system off and the CD loaded, the system will
turn on and the CD will start to play.

When the DISC·AUX button is pushed with the
CD loaded and the radio playing, the radio will
automatically be turned off and the CD will start
to play.

Menu (models with navigation system):

When the “Menu” key on the display is selected
while the CD is being played, the menu screen
will be displayed. The following menu options
are available.
. Folder List (CD with compressed audio files)

Displays the folder list.

. Track List

Displays the track list.

. Play Mode

Select a play mode from the following items.
— Normal
— 1 Folder Repeat (CD with compressed

audio files)

— 1 Track Repeat
— 1 Disc Random
— 1 Folder Random (CD with compressed

audio files)

Text (models without navigation system):

When the “Text” key is selected in the screen
using the multi-function controller and then the
ENTER button is pushed while the CD is being
played, the music information below will be
displayed on the screen.

CD:
. Disc title
. Track title
CD with compressed audio files:
. Folder title
. File title
. Song title
. Album title
. Artist

Next/Previous Track

and Fast Forward/Rewind:

When the

button is pushed for more

than 1.5 seconds while the CD is being played,
the CD will play while fast forwarding or
rewinding. When the button is released, the
CD will return to normal play speed.

When the

button is pushed for less

than 1.5 seconds while the CD is being played,
the next track or the beginning of the current
track on the CD will be played.

REPEAT (RPT), RANDOM (RDM):

When the RPT button is pushed while the CD is
played, the play pattern can be changed as
follows:

(CD)

(CD with compressed audio files)

CD EJECT:

When the CD EJECT button is pushed with the
CD loaded, the CD will be ejected.

When this button is pushed while the CD is
being played, the CD will be ejected.

If the CD comes out and is not removed, it
will be pulled back into the slot to protect
it.

DVD (Digital Versatile Disc) PLAYER
OPERATION (if so equipped)

Precautions

Start the engine when using the DVD entertain-
ment system.

Movies will not be shown on the front display
while the vehicle is in any drive position to
reduce driver distraction. Audio is available
when a movie is played. To view movies in the
front display, stop the vehicle in a safe location,
move the shift lever to the P (Park) position and
apply the parking brake.

WARNING

. The driver must not attempt to

operate the DVD system or wear
the headphones while the vehicle is
in motion so that full attention may
be given to vehicle operation.

. Do not attempt to modify the system

to display a movie on the front
screen while the vehicle is being
driven. Doing so may distract the
driver and may cause a collision and
serious personal injury or death.

CAUTION

. Only operate the DVD while the

vehicle engine is running. Operating
the DVD for extended periods of
time with the engine OFF can dis-
charge the vehicle battery.

. Do not allow the system to get wet.

Excessive moisture such as spilled
liquids may cause the system to
malfunction.

. While playing VIDEO-CD media, this

DVD player does not guarantee
complete functionality of all VI-
DEO-CD formats.

Display settings

To adjust the front display mode, push the
SETTING button while the DVD is being played.

To adjust the display ON/OFF, brightness, tint,
color and contrast, select the “Display Adjust-
ment” key and then select each key.

Then you can adjust each item using the multi-
function controller. After changes have been
made push the BACK button to save the setting.

Monitor, heater, air conditioner, audio, phone and voice recognition systems

4-91

4-92

Monitor, heater, air conditioner, audio, phone and voice recognition systems

SAA2497

Type A

SAA3091

Type B

Playing a DVD

DISC·AUX/DVD button:

Park the vehicle in a safe location for the
front seat occupants to operate the DVD
drive while watching the images.

Push the DISC·AUX/DVD button on the instru-
ment panel and turn the display to the DVD
mode.

When a DVD is loaded, it will be replayed
automatically.

The operation screen will be turned on when the
DISC·AUX button located on the instrument
panel is pushed while a DVD is being played,
and it will turn off automatically after a period of
time. To turn it on again, push the DISC·AUX/
DVD button again.

DVD operation keys:

When the DVD is playing without the operation
screen being shown, you may use the touch
screen to select items from the displayed video.
You may also use the multi-function controller to
select an item from the displayed video. When
the operation screen is being shown, use the
multifunction controller or touch screen to select
an item from the displayed menus.

PAUSE:

Select the “

” key to pause the DVD. To

resume playing the DVD, use the “PLAY” key.

PLAY:

Select the “

” key to start playing the DVD,

for example, after pausing the DVD.

STOP:

Select the “

” key to stop playing the DVD.

Next/Previous Chapter:

Select the “

” or “

” key to skip the

chapter(s) of the disc forward/backward. The
chapters will advance/go back the number of
times this key is selected.

Commercial Skip (Type A):

This function is only for DVD-VIDEO, DVD-VR.
Select the “

” or “

” key to skip forward or

backwards by the set amount as defined in the
DVD Settings menu.

Top Menu (Type A)/Menu (Type B):

When the “Top Menu” key is selected in the
screen while a DVD is being played, the top
menu specific to each disc will be displayed. For
details, see the instructions on the disc.

SAA2498

Type A (example)

SAA3087

Type B (example)

DVD settings

Select the “Settings” key to adjust the following
settings.

Key (DVD-VIDEO) (Type A):

Keys for the DVD menu operation are displayed.

: Move the cursor to select a DVD menu.

Enter: Enter the selected menu.

Move: Change the display location by moving
the operation key.

Back: Return to the previous screen.

Hide: Hide the operation key.

Title Menu (DVD-VIDEO):

Some menus specific to each disc will be
shown. For details, see the instructions on the
disc.

Title Search (DVD-VIDEO, DVD-VR):

The scene with the specified title will be
displayed each time the “+” side or “

í” side is

selected.

Group Search (VIDEO CD):

A scene in the specified group will be displayed
each time the “+” side or “

í” side is selected.

10 Key Search (DVD-VIDEO, VIDEO-CD,
CD-DA, DVD-VR):

Select the “10 Key Search” key to open the
number entry screen. Input the number to be
searched and select the “OK” key. The specified
Title/Chapter or Group/Track will be played.

Select No. (VIDEO-CD):

Select the “Select No.” key to open the number
entry screen. Input the number to be searched
and select the “OK” key. The specified scene
will be played.

Angle (DVD-VIDEO):

If the DVD contains different angles (such as
moving images), the current image angle can be
switched to another one. Select the “Angle” key.
The angle will change each time the “+” side or
“

í” side is selected.

Angle Mark (DVD-VIDEO):

When this item is turned on, an angle mark will
be shown on the bottom of the screen if the
scene can be seen from a different angle.

Menu Skip (DVD-VIDEO):

DVD menus are automatically configured and
the contents will be played directly when the
“Menu Skip” key is turned on. Note that some
discs may not be played directly even if this item
is turned on.

Monitor, heater, air conditioner, audio, phone and voice recognition systems

4-93

4-94

Monitor, heater, air conditioner, audio, phone and voice recognition systems

CM Skip (DVD-VIDEO) (Type A):

Select the “CM Skip” key. Choose the setting
time from 15, 30 or 60 seconds by selecting the
“+” side or “

í” side.

DRC (DVD-VIDEO, DVD-VR):

DRC (Dynamic Range Compression) automati-
cally adjusts the soundtrack volume level to
maintain a more even sound to the speakers.

DVD Language (DVD-VIDEO, VIDEO-CD):

Select the “DVD Language” key to open the
number entry screen. Input the number corre-
sponding to the preferred language and select
the “OK” key. The DVD top menu language will
be changed to the one specified.

Display:

To adjust the image quality of the screen, select
the preferred adjustment items.

Audio:

Select the preferred language for audio.

Subtitle (DVD-VIDEO, DVD-VR):

Select the preferred language for subtitles.

Display Mode (DVD-VIDEO, VIDEO-CD,
DVD-VR):

Select from the “Full”, “Wide”, “Normal” or
“Cinema” modes.

Title List (DVD-VR):

Select the preferred title from the list.

Play Mode:

Select the preferred play mode.

PG/PL Mode (DVD-VR):

Select the “PG” or “PL” mode.

SAA3599

USB (Universal Serial Bus) CONNEC-
TION PORT (models with center multi-
function control panel)

Audio main operation

The USB connection port is located in the
center console.

Open the USB connection port cover and
connect a USB memory as illustrated. Then,
push the DISC·AUX button repeatedly to switch
to the USB memory mode.

If the system has been turned off while the USB
memory was playing, pushing the ON·OFF/VOL
control knob will start the USB memory.

WARNING

Do not connect, disconnect or operate
the USB device while driving. Doing so
can be a distraction. If distracted you
could lose control of your vehicle and
cause an accident or serious injury.

CAUTION

. Do not force the USB device into the

USB port. Inserting the USB device
tilted or up-side-down into the port
may damage the port. Make sure
that the USB device is connected
correctly into the USB port.

. Do not grab the USB port cover (if

so equipped) when pulling the USB
device out of the port. This could
damage the port and the cover.

. Do not leave the USB cable in a

place where it can be pulled unin-
tentionally. Pulling the cable may
damage the port.

Refer to your device manufacturer’s owner
information regarding the proper use and care
of the device.

SAA2500

File selection (models with navigation
system)

When there are both audio and movie files in the
USB memory, the mode select screen is
displayed. Select the preferred content to play.

When there is only one type of file, the audio or
movie operation screen is displayed and starts
to play.

If a video file restricts the number of playbacks, a
pop-up screen will appear to confirm it is ok to
play. Answer yes or no as requested by the
display.

Monitor, heater, air conditioner, audio, phone and voice recognition systems

4-95

4-96

Monitor, heater, air conditioner, audio, phone and voice recognition systems

SAA2501

Models with navigation system

SAA2611

Models without navigation system

Audio file operation

PLAY:

When the DISC·AUX button is pushed with the
system off and the USB memory inserted, the
system will turn on.

If another audio source is playing and a USB
memory is inserted, push the DISC·AUX button
repeatedly until the center display changes to
the USB memory mode.

Next/Previous Track

and Fast Forward/Rewind:

When the

button is pushed for more

than 1.5 seconds while a USB memory is being
played, the USB memory will play while for-
warding or rewinding. When the button is
released, the USB memory will return to normal
play speed.

When the

button is pushed for less

than 1.5 seconds while the USB memory is
being played, the next track or the beginning of
the current track on the USB memory will be
played.

The multi-function controller can also be used to
select tracks when the USB memory is being
played.

Folder selection:

To change to another folder on the USB
memory, turn the FOLDER selector or choose
a folder displayed on the screen using the multi-
function controller.

REPEAT (RPT), RANDOM (RDM):

When the RPT/RDM button is pushed while the
USB memory is played, the play pattern can be
change as follows.

To change the play mode, push the RPT button
repeatedly and the mode will change as follows.

Normal

? 1 Folder Repeat ? 1 Track Repeat ?

All Random

? 1 Folder Random ? Normal

SAA2502

Menu (models with navigation system):

There are some options available during play-
back. Select one of the following options that
are displayed on the screen if necessary. Refer
to the following information for each item.
. Movie Playback

Switch to the movie playback mode. This
item is displayed only when a USB memory
contains movie files.

. Folder List/Track List

Displays the folder or track list. The “Movie
Playback” key is also displayed in this list
screen, and enables switching to the movie
playback mode.

. Play Mode

Select the preferred play mode.

Text (models without navigation system):

When the “Text” key is selected on the screen
using the multi-function controller and then the
ENTER button is pushed while a USB memory is
being played, the music information listed below
will be displayed on the screen.
. Folder title
. File title
. Song title
. Album Title
. Artist

SAA2503

Movie file operation (models with navi-
gation system)

Park the vehicle in a safe location for the
front seat occupants to operate the USB
memory while watching the images.

PLAY:

When the DISC·AUX button is pushed with the
system off and the USB memory inserted, the
system will turn on.

If another audio source is playing and a USB
memory is inserted, push the DISC·AUX button
repeatedly until the center display changes to
the USB memory mode.

Monitor, heater, air conditioner, audio, phone and voice recognition systems

4-97

4-98

Monitor, heater, air conditioner, audio, phone and voice recognition systems

Operation keys:

To operate the USB memory, select the desired
key displayed on the operation screen using the
multi-function controller.

Pause

Select the “

” key to pause the movie file. To

resume playing the movie file, select the “

”

key.

Play

Select the “

” key to start playing a movie file,

for example, after pausing a movie file.

STOP

Select the “

” key to stop playing a movie file.

Skip (Next chapter)

Select the “

” key to skip the chapter(s) of

the file forward. The chapters will advance the
number of times the ENTER button is pushed.

Skip (Previous chapter)

Select the “

” key to skip the chapter(s) of

the file backward. The chapters will go back the
number of times the “

” key is selected.

List:

Select the “List” key on the movie file operation
screen to display the file list.

SAA2504

Example

Settings:

Select the “Settings” key to adjust the following
settings.
. Audio File Playback

Switch to the audio playback mode. This
item is displayed only when the USB
memory contains audio files.

. Play Mode

Select the “Normal” or “1 Track Repeat” play
mode.

. 10 Key Search

Select the “10 Key Search” key to open the
number entry screen.
Input the number to be searched and select

the “OK” key.
The specified folder/file will be played.

. Display

To adjust the image quality of the screen,
select the preferred adjustment items.

. DRC

DRC (Dynamic Range Compression) auto-
matically adjusts the soundtrack volume
level to maintain a more even sound to the
speakers.

. Audio

Select the preferred language for audio.

. Subtitle

Select the preferred language for subtitle.

. Display Mode

Select the “Normal”, “Wide”, “Cinema” or
“Full” mode.

SAA3600

iPod

PLAYER OPERATION (models

with center multi-function control panel)

Connecting iPod

The USB connection port is located in the
center console.

Open the USB connection port cover and
connect the iPod

cable to the USB connector.

If compatible, the battery of the iPod

is charged

while the connection to the vehicle.

Depending on the version of the iPod

, the

display on the iPod

shows a NISSAN or

Accessory Attached screen when the connec-
tion is completed. When the iPod

is connected

to the vehicle, the iPod

music library can only

be operated by the vehicle audio controls.

WARNING

Do not connect, disconnect or operate
the USB device while driving. Doing so
can be a distraction. If distracted you
could lose control of your vehicle and
cause an accident or serious injury.

CAUTION

. Do not force the USB device into the

USB port. Inserting the USB device
tilted or up-side-down into the port
may damage the port. Make sure
that the USB device is connected
correctly into the USB port.

. Do not grab the USB port cover (if

so equipped) when pulling the USB
device out of the port. This could
damage the port and the cover.

. Do not leave the USB cable in a

place where it can be pulled unin-
tentionally. Pulling the cable may
damage the port.

Monitor, heater, air conditioner, audio, phone and voice recognition systems

4-99

4-100

Monitor, heater, air conditioner, audio, phone and voice recognition systems

Refer to your device manufacturer’s owner
information regarding the proper use and care
of the device.

Compatibility

The following models are available:

Models with navigation system:
. Fifth generation iPod

(firmware version

1.2.3 or later)

. iPod Classic

(firmware version 1.1.1 or

later)

. First generation iPod touch

(firmware ver-

sion 2.0.0 or later)

. Second generation iPod touch

(firmware

version 1.2.3 or later)

. First generation iPod nano

(firmware ver-

sion 1.3.1 or later)

. Second generation iPod nano

(firmware

version 1.1.3 or later)

. Third generation iPod nano

(firmware ver-

sion 1.1 or later)

. Fourth generation iPod nano

(firmware

version 1.0.2 or later)

Models without navigation system:
. Fifth generation iPod

(firmware version 1.3)

. First generation iPod Classic

(firmware

version 1.1.2 PC)

. Second generation iPod Classic

(firmware

version 2.0 PC)

. First generation iPod touch

(firmware ver-

sion 2.1)

. Second generation iPod touch

(firmware

version 2.1.1)

. First generation iPod nano

(firmware ver-

sion 1.3.1)

. Second generation iPod nano

(firmware

version 1.1.3)

. Third generation iPod nano

(firmware ver-

sion 1.1 PC)

. Third generation iPhone

(firmware version

2.1)

Make sure that the iPod

version is updated.

Audio main operation

Push the ignition switch to the ACC or ON
position. Then, push the DISC·AUX button
repeatedly to switch to the iPod

mode.

If the system has been turned off while the iPod

was playing, pushing the ON·OFF button will
start the iPod

play:

When the DISC·AUX button is pushed with the
system off and the iPod

connected, the system

will turn on. If another audio source is playing
and the iPod

is connected, push the DISC·AUX

button repeatedly until the center display
changes to the iPod

mode.

Interface:

The interface for iPod

operation shown on the

vehicle center display is similar to the iPod

interface. Use the multi-function controller and
the ENTER or BACK button to play the iPod

with your favorite settings.

The following items can be chosen from the
menu list screen. For further information about
each item, see the iPod

Owner’s Manual.

. Now Playing
. Playlists
. Artists
. Albums
. Songs
. Podcasts
. Genres
. Composers
. Audiobooks
. Shuffle Songs
. Play mode
The following touch-panel buttons shown on the
screen are also available:
.

: returns to the previous screen.

: plays/pauses the music selected.

Next/Previous Track and Fast

Forward/Rewind:

When the

button is pushed for more

than 1.5 seconds while the iPod

is playing, the

iPod

will play while fast forwarding or rewind-

ing. When the button is released, the iPod

will

return to the normal play speed.

When the

button is pushed for less

than 1.5 seconds while the iPod

is playing, the

next track or the beginning of the current track
on the iPod

will be played.

The multi-function controller can also be used to
select tracks when the iPod

is playing.

REPEAT (RPT), RANDOM (RDM):

When the RPT button is pushed while a track is
being played, the play pattern can be changed
as follows:

Bluetooth

STREAMING AUDIO (mod-

els with navigation system)

Your vehicle is equipped with Bluetooth

Streaming Audio. If you have a compatible
Bluetooth

device with streaming audio (A2DP

profile), you can set up the wireless connection
between your Bluetooth

device and the in-

vehicle audio system. This connection allows
you to listen to the audio from the Bluetooth

device using your vehicle speakers. It also may
allow basic control of the device for playing and
skipping audio files using the AVRCP Blue-
tooth

profile. All Bluetooth

Devices do not

have the same level of controls for AVRCP.
Please consult the manual for your Bluetooth

Device for more details.

Once your Bluetooth

device is connected to

the in-vehicle audio system, it will automatically
reconnect whenever the device is present in the
vehicle and you select Bluetooth

Audio from

your audio system. You do not need to manually
reconnect for each usage.

Wireless LAN (Wi-Fi) and the Bluetooth

functions share the same frequency band (2.4
GHz). Using the Bluetooth

and the wireless

LAN functions at the same time may slow down
or disconnect the communication and cause
undesired noise. It is recommended that you
turn off the wireless LAN (Wi-Fi) when using the

Bluetooth

functions.

Regulatory information

FCC Regulatory information:
. CAUTION: To maintain compliance with

FCC’s RF exposure guidelines, use only
the supplied antenna. Unauthorized antenna,
modification, or attachments could damage
the transmitter and may violate FCC regula-
tions.

. Operation is subject to the following two

conditions:
1) This device may not cause interference

and

2) This device must accept any interfer-

ence, including interference that may
cause undesired operation of the device

IC Regulatory information:
. Operation is subject to the following two

conditions:
1) This device may not cause interference,

and

2) This device must accept any interfer-

ence, including interference that may
cause undesired operation of the device.

. This Class B digital apparatus meets all

requirements of the Canadian Interference-
Causing Equipment Regulations.

Monitor, heater, air conditioner, audio, phone and voice recognition systems

4-101

Nissan Quest (2017 year). Instruction - part 18