Nissan Titan A60. Manual - part 136
BCS-24
< SYSTEM DESCRIPTION >
[BCM]
DIAGNOSIS SYSTEM (BCM)
ACTIVE TEST
WORK SUPPORT
*: Initial setting
RETAINED PWR
RETAINED PWR : CONSULT-III Function (BCM - RETAINED PWR)
INFOID:0000000006161335
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
*: Initial setting
SIGNAL BUFFER
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
KEY CYL LK-SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN-SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
Monitor Item [Unit]
Description
Test Item
Description
THEFT IND
This test is able to check security indicator lamp operation [Off/On].
VEHICLE SECURITY HORN
This test is able to check vehicle security horn operation [On].
HEADLAMP(HI)
This test is able to check vehicle security lamp operation [On].
Support Item
Setting
Description
SECURITY ALARM SET
Off
Security alarm OFF.
On*
Security alarm ON.
THEFT ALM TRG
Off/On
The switch which triggered vehicle security alarm is recorded [On]. This mode is able
to confirm and erase the record of vehicle security alarm. The trigger data can be
erased by touching [CLEAR].
CLEAR
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
Test Item
Description
RETAINED PWR
This test is able to check retained power operation [Off/On].
Support Item
Setting
Description
RETAINED PWR SET
MODE3
2 min
Sets the retained accessory power operating time.
MODE2
OFF
MODE1*
45 sec