|
|
BCS-20 < SYSTEM DESCRIPTION > [BCM] DIAGNOSIS SYSTEM (BCM) ACTIVE TEST WORK SUPPORT *: Initial setting WIPER HI BEAM SW [On/Off] Indicates condition of combination switch. HEAD LAMP SW 1 [On/Off] HEAD LAMP SW 2 [On/Off] LIGHT SW 1ST [On/Off] AUTO LIGHT SW [On/Off] PASSING SW [On/Off] FR FOG SW [On/Off] DOOR SW-DR [On/Off] Indicates condition of front door switch LH. DOOR SW-AS [On/Off] Indicates condition of front door switch RH. DOOR SW-RR [On/Off] Indicates condition of rear door switch RH. DOOR SW-RL [On/Off] Indicates condition of rear door switch LH. TURN SIGNAL R [On/Off] Indicates condition of combination switch. TURN SIGNAL L [On/Off] CARGO LAMP SW [ON/OFF] Indicates condition of cargo lamp switch. OPTICAL SENSOR [ON/OFF] Indicates voltage signal from optical sensor. Monitor Item [Unit] Description Test Item Description TAIL LAMP This test is able to check tail lamp operation [Off/On]. HEAD LAMP This test is able to check head lamp operation [Off/Lo/Hi]. FR FOG LAMP This test is able to check front fog lamp operation [Off/On]. CARGO LAMP This test is able to check cargo lamp operation [Off/On]. CORNERING LAMP This test is able to check turn signal lamp operation [Off/LH/RH]. Support Item Setting Description BATTERY SAVER SET Off Exterior lamp battery saver function OFF. On* Exterior lamp battery saver function ON. CUSTOM A/LIGHT SETTING MODE4 Less sensitive setting than normal setting (Turns ON later than MODE3 More sensitive setting than MODE 2 (Turns ON earlier than MODE2 More sensitive setting than normal setting (Turns ON earlier MODE1* Normal. ILL DELAY SET MODE8 180 sec Sets delay timer function operation time MODE7 150 sec MODE6 120 sec MODE5 90 sec MODE4 60 sec MODE3 30 sec MODE2 OFF MODE1* 45 sec |