|
|
DLK-114 < ECU DIAGNOSIS INFORMATION > SLIDING DOOR CONTROL UNIT LH : Fail-safe INFOID:0000000009649025 FAIL-SAFE CONTROL BT DTC Sliding door control unit performs fail-safe control when any DTC is detected. 24 (G) Ground Sliding door touch Input Sliding door Pinching detec- 0 – 1.5 V Other than 4 – 8 V 26 (SB) Ground Ground (encoder) — — 0 V 27 (B/Y) Ground Ground — — 0 V 28 (V) Ground Sliding door switch Input Sliding door Close 8 – 16 V Open 0 – 1.5 V 33 (B/Y) Ground Ground — — 0 V 34 (GR) Ground Sliding door closure Output Sliding door clo- Close operation 9 – 16 V Other than 0 – 1.5 V 35 (SB) Ground Sliding door closure Output Sliding door clo- Return operation 9 – 16 V Other than 0 – 1.5 V 36 (V) Ground Power supply (BAT) Input Ignition switch OFF 9 – 16 V 37 (B/Y) Ground Ground — — 0 V 39 (G) Ground Sliding door lock re- Output Sliding door lock Operate 0 – 1.5 V Other than 0 V 40 (Y) Ground Sliding door lock re- Output Sliding door lock Operate 9 – 16 V Other than 0 V 42 (V) Ground Power supply (sliding Input Ignition switch OFF 9 – 16 V 43 (R) Ground Sliding door motor Output Sliding door LH Auto open oper- 9 – 16 V Other than 0 – 1.5 V 44 (P) Ground Clutch ( − ) Output Clutch LH ON 0 – 1.5 V OFF 0 V 46 (W) Ground Sliding door motor Output Sliding door LH Auto close oper- 9 – 16 V Other than 0 – 1.5 V 47 (SB) Ground Clutch (+) Output Clutch LH ON 9 – 16 V OFF 0 V Terminal No. (Wire color) Description Condition Voltage (+) (–) Signal name Input/ Output |