Nissan Quest E52. Manual - part 7
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
ADP-21
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
CONSULT Function
INFOID:0000000009649607
The automatic drive positioner system can be checked and diagnosed for component operation using CON-
SULT.
APPLICATION ITEMS
SELF-DIAGNOSIS RESULTS
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Diagnostic mode
Description
Ecu Identification
Displays part numbers of driver seat control unit.
Self Diagnostic Result
Performs self-diagnosis for the auto drive positioner system and displays the results.
Data Monitor
Displays input signals transmitted from various switches and sensors to driver seat control unit
in real time.
Active Test
Drives each output unit.
Work support
Changes the setting for each system function.
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
STARTER SW
“ON/OFF”
×
×
Ignition key switch ON (START, ON) /OFF (ACC, OFF) sta-
tus judged from the ignition switch signal.
SET SW
“ON/OFF”
×
×
ON/OFF status judged from the setting switch signal.
MEMORY SW 1
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 1 sig-
nal.
MEMORY SW 2
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 2 sig-
nal.
DETENT SW
“ON/OFF”
×
×
The CVT shift selector position “OFF (P position) / ON (oth-
er than P position)” judged from the detention switch signal.
STEERING STATUS
“LOCK/UN-
LOCK”
×
×
NOTE:
This item is indicated, but not monitored.
SLIDE SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (forward) sig-
nal.
SLIDE SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (backward)
signal.
RECLN SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (forward)
signal.
RECLN SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (backward)
signal.
LIFT FR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (up) sig-
nal.
LIFT FR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (down)
signal.
LIFT RR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (up) sig-
nal.
LIFT RR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (down)
signal.
MIR CON SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (up) signal.