Nissan Cube. Manual - part 66

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-113

< SYSTEM DESCRIPTION >

[WITHOUT INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

ACTIVE TEST

AIR CONDITIONER

AIR CONDITIONER : CONSULT Function (BCM - AIR CONDITIONER) (Manual A/C)

INFOID:0000000010249127

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Display Item List

ACTIVE TEST

COMB SW

COMB SW : CONSULT Function (BCM - COMB SW)

INFOID:0000000009949775

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

Monitor item

[Unit]

Description

IGN ON SW
[On/Off]

Indicated [On/Off] condition of ignition switch in ON position

HAZARD SW
[On/Off]

The switch status input from the hazard switch

TURN SIGNAL R
[On/Off]

Each switch status that BCM detects from the combination switch reading function

TURN SIGNAL L
[On/Off]

Test item

Operation

Description

FLASHER

RH

Outputs the voltage to turn the right side turn signal lamps ON.

LH

Outputs the voltage to turn the left side turn signal lamps ON.

Off

Stops the voltage to turn the turn signal lamps OFF.

Monitor Item [Unit]

Contents

IGN SW

[On/Off]

Displays ignition switch position status as judged from ignition switch signal.

FAN ON SIG

[On/Off]

Displays the blower fan status as judged from fan switch signal.

AIR COND SW

[On/Off]

Displays [COMP (On)/COMP (Off)] status as judged from air conditioner switch signal.

THERMO AMP

[On/Off]

Displays the thermo control amp. status as judged from thermo control amp. signal.

FR DEF SW

[On/Off]

Displays the DEF status as judged from defroster position switch (mode switch) signal.

Test item

Operation

Description

A/C INDICATOR

On

A/C indicator is turned ON.

Off

A/C indicator is turned OFF.

BCS-114

< SYSTEM DESCRIPTION >

[WITHOUT INTELLIGENT KEY SYSTEM]

DIAGNOSIS SYSTEM (BCM)

BCM

BCM : CONSULT Function (BCM - BCM)

INFOID:0000000009949776

WORK SUPPORT

IMMU

IMMU : CONSULT Function (BCM - IMMU)

INFOID:0000000010249173

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

Monitor item [UNIT]

Description

TURN SIGNAL R
[Off/On]

Displays the status of TURN RH switch in combination switch judged by the combination switch reading func-
tion.

TURN SIGNAL L
[Off/On]

Displays the status of the TURN LH switch in combination switch judged by the combination switch reading 
function.

HI BEAM SW
[Off/On]

Displays the status of HI BEAM switch in combination switch judged by the combination switch reading func-
tion.

HEAD LAMP SW 1
[Off/On]

Displays the status of HEADLAMP 1 switch in combination switch judged by the combination switch reading 
function.

HEAD LAMP SW 2
[Off/On]

Displays the status of HEADLAMP 2 switch in combination switch judged by the combination switch reading 
function.

TAIL LAMP SW
[Off/On]

Displays the status of TAIL LAMP switch in combination switch judged by the combination switch reading 
function.

PASSING SW
[Off/On]

Displays the status of PASSING switch in combination switch judged by the combination switch reading func-
tion.

AUTO LIGHT SW
[Off/On]

NOTE:
The item is indicated, but not monitored.

FR FOG SW
[Off/On]

NOTE:
The item is indicated, but not monitored.

RR FOG SW
[Off/On]

NOTE:
The item is indicated, but not monitored.

FR WIPER HI
[Off/On]

Displays the status of FR WIPER HI switch in combination switch judged by the combination switch reading 
function.

FR WIPER LOW
[Off/On]

Displays the status of FR WIPER LOW switch in combination switch judged by the combination switch read-
ing function.

FR WIPER INT
[Off/On]

Displays the status of FR WIPER INT switch in combination switch judged by the combination switch reading 
function.

FR WASHER SW
[Off/On]

Displays the status of FR WASHER switch in combination switch judged by the combination switch reading 
function.

INT VOLUME
[1 - 7]

Displays the status of wiper intermittent dial position judged by the combination switch reading function.

RR WIPER ON
[Off/On]

Displays the status of RR WIPER switch in combination switch judged by the combination switch reading 
function.

RR WIPER INT
[Off/On]

Displays the status of RR WIPER INT switch in combination switch judged by the combination switch reading 
function.

RR WASHER SW
[Off/On]

Displays the status of RR WASHER switch in combination switch judged by the combination switch reading 
function.

Item

Description

RESET SETTING VALUE

Return a value set with WORK SUPPORT of each system to a default value in factory shipment.

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-115

< SYSTEM DESCRIPTION >

[WITHOUT INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

ACTIVE TEST

BATTERY SAVER

BATTERY SAVER : CONSULT Function (BCM - BATTERY SAVER)

INFOID:0000000010249182

WORK SUPPORT

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

Monitor item 

Content

IGN ON SW

Indicates [ON/OFF] condition of ignition switch in ON position.

KEY ON SW

Indicates [ON/OFF] condition of key switch.

Test item

Description

THEFT IND

This test is able to check security indicator lamp operation [ON/OFF]. 

Service item

Setting item

Setting

ROOM LAMP TIMER SET

MODE 1

30 min.

Sets the interior room lamp battery saver timer operating 
time. 
NOTE:
The factor setting is 10 minutes. The setting cannot be re-
turned to the factory setting, when the setting is changed 
once.

MODE 2

60 min.

MODE 3

15 min.

Monitor item

[Unit]

Description

IGN ON SW
[On/Off]

Indicated [On/Off] condition of ignition switch in ON position

ACC ON SW
[On/Off]

Indicated [On/Off] condition of ignition switch in ACC position

KEY ON SW
[On/Off]

Indicated [On/Off] condition of key switch

DOOR SW-DR
[On/Off]

Indicated [On/Off] condition of front door switch (driver side)

DOOR SW-AS
[On/Off]

Indicated [On/Off] condition of front door switch (passenger side)

DOOR SW-RR
[On/Off]

Indicated [On/Off] condition of rear door switch RH

DOOR SW- RL
[On/Off]

Indicated [On/Off] condition of rear door switch LH

BACK DOOR SW
[On/Off]

Indicated [On/Off] condition of back door switch

LOCK STATUS
[On/Off]

Indicated [On/Off] condition of driver side door

CDL LOCK SW
[On/Off]

Indicated [On/Off] condition of lock signal from door lock unlock switch

CDL UNLOCK SW
[On/Off]

Indicated [On/Off] condition of unlock signal from door lock unlock switch

KEYLESS LOCK
[On/Off]

Indicates [On/Off] condition of lock signal from keyfob

KEYLESS UNLOCK
[On/Off]

Indicates [On/Off] condition of unlock signal from keyfob

BCS-116

< SYSTEM DESCRIPTION >

[WITHOUT INTELLIGENT KEY SYSTEM]

DIAGNOSIS SYSTEM (BCM)

ACTIVE TEST

TRUNK

TRUNK : CONSULT Function (BCM - TRUNK)

INFOID:0000000010249172

BCM CONSULT FUNCTION

CONSULT performs the following functions via CAN communication with BCM.

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

THEFT ALM

THEFT ALM : CONSULT Function (BCM - THEFT ALM)

INFOID:0000000010249174

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

KEY CYL LK-SW
[On/Off]

Indicated [On/Off] condition of lock signal from door key cylinder

KEY CYL UN-SW
[On/Off]

Indicated [On/Off] condition of unlock signal from door key cylinder

TRNK/HAT MNTR
[On/Off]

NOTE:
This item is displayed, but cannot be tested

Monitor item

[Unit]

Description

Test item

Operation

Description

BATTERY SAVER

Off

Cuts the interior room lamp power supply.

On

Outputs the interior room lamp power supply.

Diagnosis mode

Function Description

DATA MONITOR

The BCM input/output signals are displayed.

Monitor Item

Contents

KEY ON SW

Indicates [On/Off] condition of key switch.

LOCK STATUS

NOTE:
This item is displayed, but cannot be monitored. 

VEHICLE SPEED

Indicates [Km/h] condition of vehicle speed signal from combination meter.

IGN ON SW 

Indicates [On/Off] condition of ignition switch.

TRNK OPNR SW

NOTE:
This item is displayed, but cannot be monitored. 

KYLS TRNK/HAT

NOTE:
This item is displayed, but cannot be monitored. 

Monitor Item

Condition

IGN ON SW

Indicates [ON/OFF] condition of ignition switch in ON position.

ACC ON SW

Indicates [ON/OFF] condition of ignition switch in ACC position.

KEY ON SW

Indicates [ON/OFF] condition of key switch.

KEYLESS LOCK

Indicates [ON/OFF] condition of lock signal from keyfob.