Nissan Rogue. Manual - part 178

EXCESSIVE OPERATION FREQUENCY

BRC-123

< SYMPTOM DIAGNOSIS >

[VDC/TCS/ABS]

C

D

E

G

H

I

J

K

L

M

A

B

BRC

N

O

P

With CONSULT

1. Turn the ignition switch OFF 

→ ON.

CAUTION:

• Be sure to wait of 10 seconds after turning ignition switch OFF or ON.

• Set the vehicle to READY/Start the engine.

2. Repeat step 1 two or more times.

3. Perform “Self Diagnostic Result” of “ABS”.
Is any DTC detected?

YES

>> Check the DTC. Refer to 

BRC-53, "DTC Index"

.

NO

>> Inspection End.

BRC-124

< SYMPTOM DIAGNOSIS >

[VDC/TCS/ABS]

UNEXPECTED BRAKE PEDAL REACTION

UNEXPECTED BRAKE PEDAL REACTION

Description

INFOID:0000000011280659

A malfunction of brake pedal feel (height or others) is detected when brake pedal is depressed.

Diagnosis Procedure

INFOID:0000000011280660

1.

CHECK FRONT AND REAR AXLE

Check that there is no excessive looseness in front and rear axle.

• 2WD: Refer to 

FAX-7, "Inspection"

 (front) or 

RAX-6, "Inspection"

 (rear).

• AWD: Refer to 

FAX-45, "Inspection"

 (front) or 

RAX-14, "Inspection"

 (rear).

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace error-detected parts.

2.

CHECK DISC ROTOR

Check disc rotor runout.

• Front: Refer to 

BR-11, "DISC BRAKE ROTOR : Inspection"

.

• Rear: Refer to 

BR-13, "DISC BRAKE ROTOR : Inspection"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Refinish the disc rotor.

3.

CHECK BRAKE FLUID LEAKAGE

Check fluid leakage.

Refer to 

BR-8, "Inspection"

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace error-detected parts.

4.

CHECK BRAKE PEDAL

Check each item of brake pedal. Refer to 

BR-15, "Adjustment"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Adjust each item of brake pedal. Refer to 

BR-15, "Adjustment"

.

5.

CHECK BRAKING FORCE

Check brake force using a brake tester.
Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Check each components of brake system.

6.

CHECK BRAKE PERFORMANCE

Disconnect ABS actuator and electric unit (control unit) connector so that ABS does not operate. Check that

brake force is normal in this condition. Connect harness connectors after checking.
Is the inspection result normal?

YES

>> Normal

NO

>> Check each components of brake system.

THE BRAKING DISTANCE IS LONG

BRC-125

< SYMPTOM DIAGNOSIS >

[VDC/TCS/ABS]

C

D

E

G

H

I

J

K

L

M

A

B

BRC

N

O

P

THE BRAKING DISTANCE IS LONG

Description

INFOID:0000000011280661

Brake stopping distance is long when ABS function is operated.

Diagnosis Procedure

INFOID:0000000011280662

CAUTION:

Brake stopping distance on slippery road like rough road, gravel road or snowy road may become

longer when ABS is operated than when ABS is not operated.

1.

CHECK BRAKING FORCE

Check brake force using a brake tester.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check each components of brake system.

2.

CHECK BRAKE PERFORMANCE

Disconnect ABS actuator and electric unit (control unit) connector so that ABS does not operate. Check brake

stopping distance in this condition. Connect harness connectors after checking.
Is the inspection result normal?

YES

>> Normal

NO

>> Check each components of brake system.

BRC-126

< SYMPTOM DIAGNOSIS >

[VDC/TCS/ABS]

DOES NOT OPERATE

DOES NOT OPERATE

Description

INFOID:0000000011280663

VDC function, TCS function, ABS function, EBD function, Brake limited slip differential (BLSD) function, Brake

assist function, hill start assist function or Brake force distribution function does not operate.

Diagnosis Procedure

INFOID:0000000011280664

CAUTION:

• VDC function, TCS function, ABS function, EBD function, Brake limited slip differential (BLSD) func-

tion, Brake assist function, hill start assist function and Brake force distribution function never oper-

ate when the vehicle speed is 10 km/h (6.2 MPH) or less. However, TCS function, Brake limited slip

differential (BLSD) function and hill start assist function operates when the vehicle speed is 0 km/h

(0 MPH) (the vehicle is in stop status).

• VDC function and TCS function never operate when VDC OFF switch is operated (when VDC OFF

indicator lamp turns ON).

1.

CHECK ABS WARNING LAMP

Check that ABS warning lamp, brake warning lamp and VDC warning lamp turn ON and turn OFF approx. 1

second after key switch is turned ON. Check that ABS warning lamp, brake warning lamp and VDC warning

lamp and stay in OFF status during driving.

CAUTION:

Brake warning lamp turns ON when parking brake is operated (parking brake switch is ON) or brake

fluid is less than the specified level (brake fluid level switch is ON).
Is the inspection result normal?

YES

>> Normal

NO

>> GO TO 2.

2.

PERFORM SELF DIAGNOSTIC

With CONSULT

1. Turn the ignition switch OFF 

→ ON.

CAUTION:

• Be sure to wait of 10 seconds after turning ignition switch OFF or ON.

• Start the engine.

2. Repeat step 1 two or more times.

3. Perform “Self Diagnostic Result” of “ABS” with CONSULT.
Is any DTC detected?

YES

>> Check the DTC. Refer to 

BRC-53, "DTC Index"

.

NO

>> Inspection End.