Nissan Rogue. Manual - part 1240

WT-36

< DTC/CIRCUIT DIAGNOSIS >

C1716, C1717, C1718, C1719 TRANSMITTER (PRESSURE DATA)

C1716, C1717, C1718, C1719 TRANSMITTER (PRESSURE DATA)

DTC Logic

INFOID:0000000011280508

NOTE:

The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions. Refer to the Signal Tech

II User Guide for additional information.

• Activate and display TPMS sensor IDs

• Display tire pressure reported by the TPMS sensor

• Read TPMS DTCs

• Register TPMS sensor IDs

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

PERFORM SELF DIAGNOSTIC RESULT 

 With CONSULT

1. Check tire pressure for all wheels and adjust to the specified value. Refer to 

WT-73, "Tire Air Pressure"

. 

2. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for

10 minutes.

3. Perform “Self Diagnostic Result”.
Is DTC C1716, C1717, C1718, or C1719 detected?

YES

>> Proceed to 

WT-36, "Diagnosis Procedure"

.

NO

>> Inspection End.

Diagnosis Procedure

INFOID:0000000011280509

NOTE:

The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions. Refer to the Signal Tech

II User Guide for additional information.

• Activate and display TPMS sensor IDs

• Display tire pressure reported by the TPMS sensor

• Read TPMS DTCs

• Register TPMS sensor IDs

1.

TIRE PRESSURE SENSOR ID REGISTRATION

Perform tire pressure sensor ID registration. Refer to 

WT-26, "Work Procedure"

.

Can the tire pressure sensor ID registration be completed?

YES

>> GO TO 2.

NO

>> Replace applicable tire pressure sensor. Refer to 

WT-68, "Removal and Installation"

.

2.

CHECK TIRE PRESSURE SIGNAL

 With CONSULT

1. Adjust tire pressure for all wheels to the specified value. Refer to 

WT-73, "Tire Air Pressure"

. 

2. Select “Data Monitor” in “AIR PRESSURE MONITOR”.

3. Check that the air pressures match the specified value.

DTC

Display Item

Malfunction Detection Condition

Possible Cause

C1716

[PRESSDATA ERR] FL

Malfunction in the tire pressure data from the 
front LH wheel tire pressure sensor.

• Excessive tire pressure
• ID registration incomplete
• Tire pressure sensor
• BCM

C1717

[PRESSDATA ERR] FR

Malfunction in the tire pressure data from the 
front RH wheel tire pressure sensor.

C1718

[PRESSDATA ERR] RR

Malfunction in the tire pressure data from the 
rear RH wheel tire pressure sensor.

C1719

[PRESSDATA ERR] RL

Malfunction in the tire pressure data from the 
rear LH wheel tire pressure sensor.

C1716, C1717, C1718, C1719 TRANSMITTER (PRESSURE DATA)

WT-37

< DTC/CIRCUIT DIAGNOSIS >

C

D

F

G

H

I

J

K

L

M

A

B

WT

N

O

P

Is the inspection result normal?

YES

>> Inspection End.

NO

>> Replace BCM. Refer to 

BCS-75, "Removal and Installation"

 (with Intelligent Key system) or 

BCS-

135, "Removal and Installation"

 (without Intelligent Key system).

Monitor item

Displayed value

AIR PRESS FL

Approximately equal to specified value. Refer to 

WT-73, "Tire Air Pressure"

.

AIR PRESS FR

AIR PRESS RR

AIR PRESS RL

WT-38

< DTC/CIRCUIT DIAGNOSIS >

C1729 VEHICLE SPEED SIGNAL

C1729 VEHICLE SPEED SIGNAL

DTC Logic

INFOID:0000000011280510

NOTE:

The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions. Refer to the Signal Tech

II User Guide for additional information.

• Activate and display TPMS sensor IDs

• Display tire pressure reported by the TPMS sensor

• Read TPMS DTCs

• Register TPMS sensor IDs

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

PERFORM SELF DIAGNOSTIC RESULT 

 With CONSULT

1. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for

10 minutes.

2. Perform “Self Diagnostic Result”.
Is DTC C1729 detected?

YES

>> Proceed to 

WT-38, "Diagnosis Procedure"

.

NO

>> Inspection End.

Diagnosis Procedure

INFOID:0000000011280511

NOTE:

The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions. Refer to the Signal Tech

II User Guide for additional information.

• Activate and display TPMS sensor IDs

• Display tire pressure reported by the TPMS sensor

• Read TPMS DTCs

• Register TPMS sensor IDs

1.

PERFORM SELF DIAGNOSTIC RESULT FOR ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

 With CONSULT

Perform “Self Diagnostic Result” for “ABS”. Refer to 

BRC-42, "CONSULT Function"

.

Are any DTCs detected?

YES

>> Refer to 

BRC-53, "DTC Index"

.

NO

>> Replace the BCM. Refer to 

BCS-75, "Removal and Installation"

 (with Intelligent Key system) or

BCS-135, "Removal and Installation"

 (without Intelligent Key system).

DTC

Display Item

Malfunction Detected Condition

Possible Cause

C1729

VHCL SPEED SIG ERR

Vehicle speed signal not detected.

• CAN communication
• BCM
• ABS actuator and electric unit (control unit)

C1730, C1731, C1732, C1733 FLAT TIRE

WT-39

< DTC/CIRCUIT DIAGNOSIS >

C

D

F

G

H

I

J

K

L

M

A

B

WT

N

O

P

C1730, C1731, C1732, C1733 FLAT TIRE

DTC Logic

INFOID:0000000011280512

NOTE:

The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions. Refer to the Signal Tech

II User Guide for additional information.

• Activate and display TPMS sensor IDs

• Display tire pressure reported by the TPMS sensor

• Read TPMS DTCs

• Register TPMS sensor IDs

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

PERFORM SELF DIAGNOSTIC RESULT 

 With CONSULT

1. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for

10 minutes.

2. Perform “Self Diagnostic Result”.
Is DTC C1730, C1731, C1732, or C1733 detected?

YES

>> Proceed to 

WT-39, "Diagnosis Procedure"

.

NO

>> Inspection End.

Diagnosis Procedure

INFOID:0000000011280513

NOTE:

The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions. Refer to the Signal Tech

II User Guide for additional information.

• Activate and display TPMS sensor IDs

• Display tire pressure reported by the TPMS sensor

• Read TPMS DTCs

• Register TPMS sensor IDs

1.

TIRE PRESSURE SENSOR ID REGISTRATION

Perform tire pressure sensor ID registration. Refer to 

WT-26, "Work Procedure"

.

Can the tire pressure sensor ID registration be completed?

YES

>> GO TO 2.

NO

>> Replace applicable tire pressure sensor. Refer to 

WT-68, "Removal and Installation"

.

2.

CHECK TIRE PRESSURE

Check the air pressure of all wheels. Refer to 

WT-73, "Tire Air Pressure"

.

Is the inspection result normal?

YES

>> Perform DTC CONFIRMATION PROCEDURE again. Refer to 

WT-39, "DTC Logic"

.

NO

>> GO TO 3.

DTC

Display Item

Malfunction Detected Condition

Possible Cause

C1730

FLAT TIRE FL

Front LH tire pressure is 70 kPa (0.7 kg/cm

2

, 

10 psi) or less.

• Low tire pressure
• Tire pressure sensor

C1731

FLAT TIRE FR

Front RH tire pressure is 70 kPa (0.7 kg/cm

2

, 

10 psi) or less.

C1732

FLAT TIRE RR

Rear RH tire pressure is 70 kPa (0.7 kg/cm

2

, 

10 psi) or less.

C1733

FLAT TIRE RL

Rear LH tire pressure is 70 kPa (0.7 kg/cm

2

, 

10 psi) or less.