|
|
BCS-26 < SYSTEM DESCRIPTION > [WITH INTELLIGENT KEY SYSTEM] DIAGNOSIS SYSTEM (BCM) THEFT ALM INFOID:0000000011280198 DATA MONITOR ACTIVE TEST WORK SUPPORT RETAINED PWR INFOID:0000000011280199 DATA MONITOR Monitor Item [Unit] Description PUSH SW [On/Off] Indicates condition of push-button ignition switch. DETECTION SENSOR (BK) [On/ NOTE: VEH SPEED 1 [km/h] Indicates vehicle speed signal received from ABS on CAN communication line. BACK DOOR OPENER SW [On/Off] Indicates condition of back door opener switch. RKE-TR/BD [On/Off] Indicates condition of back door open signal from Intelligent Key. Monitored Item Description REQ SW -DR [On/Off] Indicates condition of door request switch LH. REQ SW -AS [On/Off] Indicates condition of door request switch RH. REQ SW-BD/TR [On/Off] Indicates condition of back door request switch. PUSH SW [On/Off] Indicates condition of push-button ignition switch. DOOR SW-DR [On/Off] Indicates condition of front door switch LH. DOOR SW-AS [On/Off] Indicates condition of front door switch RH. DOOR SW-RR [On/Off] Indicates condition of rear door switch RH. DOOR SW-RL [On/Off] Indicates condition of rear door switch LH. DOOR SW-BK [On/Off] Indicates condition of back door switch. CDL LOCK SW [On/Off] Indicates condition of lock signal from door lock and unlock switch. CDL UNLOCK SW [On/Off] Indicates condition of unlock signal from door lock and unlock switch. KEY CYL LK-SW [On/Off] Indicates condition of lock signal from door key cylinder switch. KEY CYL UN-SW [On/Off] Indicates condition of unlock signal from door key cylinder switch. KEY CYL SW-TR Indicates condition of key cylinder switch back door. SEN CANCEL SW Indicates condition of sensor cancel switch. RKE-LOCK [On/Off] Indicates condition of lock signal from Intelligent Key. RKE-UNLOCK [On/Off] Indicates condition of unlock signal from Intelligent Key. RKE-TR/BD [On/Off] Indicates condition of back door open signal from Intelligent Key. Test Item Description VEHICLE SECURITY HORN This test is able to check vehicle security horn operation [On]. HEADLAMP(HI) This test is able to check vehicle security lamp operation [On]. Support Item Setting Description SECURITY ALARM SET On Security alarm ON. Off Security alarm OFF. |