Nissan Rogue. Manual - part 103

BCS-18

< SYSTEM DESCRIPTION >

[WITH INTELLIGENT KEY SYSTEM]

DIAGNOSIS SYSTEM (BCM)

ACTIVE TEST

WORK SUPPORT

* : Initial setting

BUZZER
BUZZER : CONSULT Function (BCM - BUZZER)

INFOID:0000000011280187

DATA MONITOR

ACTIVE TEST

INT LAMP
INT LAMP : CONSULT Function (BCM - INT LAMP)

INFOID:0000000011280188

DATA MONITOR

Monitor Item [Unit]

Description

PUSH SW [On/Off]

Indicates condition of push-button ignition switch.

REAR DEF SW [On/Off]

Indicates condition of rear window defogger switch.

Test Item

Description

REAR DEFOGGER

This test is able to check rear window defogger operation [Off/On].

Support Item

Setting

Description

SET R-DEF TIMER

MODE3

Rear defogger turns OFF after 1 minute.

MODE2

Rear defogger remains ON until turned OFF.

MODE1*

Rear defogger turns OFF after 15 minutes.

Monitor Item [Unit]

Description

PUSH -SW [On/Off]

Indicates condition of push-button ignition switch.

VEH SPEED 1 [km/h]

Indicates vehicle speed signal received from ABS on CAN communication line.

TAIL LAMP SW [On/Off]

Indicates condition of combination switch.

FR FOG SW [On/Off]

Indicates condition of front fog lamp switch.

DOOR SW-DR [On/Off]

Indicates condition of front door switch LH.

CDL LOCK SW [On/Off]

Indicates condition of lock signal from door lock and unlock switch.

Test Item

Description

SEAT BELT WARN TEST

This test is able to check seat belt warning chime operation [On/Off].

LIGHT WARN ALM

This test is able to check light warning chime operation [On/Off].

REVERSE WARNING

This test is able to check reverse warning chime operation [On/Off].

Monitor Item [Unit]

Description

REQ SW -DR [On/Off]

Indicates condition of door request switch LH.

REQ SW -AS [On/Off]

Indicates condition of door request switch RH.

PUSH -SW [On/Off]

Indicates condition of push-button ignition switch.

DOOR SW-DR [On/Off]

Indicates condition of front door switch LH.

DOOR SW-AS [On/Off]

Indicates condition of front door switch RH.

DOOR SW-RR [On/Off]

Indicates condition of rear door switch RH.

DOOR SW-RL [On/Off]

Indicates condition of rear door switch LH.

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-19

< SYSTEM DESCRIPTION >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

ACTIVE TEST

WORK SUPPORT

*: Initial setting

HEADLAMP
HEADLAMP : CONSULT Function (BCM - HEADLAMP)

INFOID:0000000011280189

DATA MONITOR

DOOR SW-BK [On/Off]

Indicates condition of back door switch.

CDL LOCK SW [On/Off]

Indicates condition of lock signal from door lock and unlock switch.

CDL UNLOCK SW [On/Off]

Indicates condition of unlock signal from door lock and unlock switch.

KEY CYL LK-SW [On/Off]

Indicates condition of lock signal from door key cylinder switch.

KEY CYL UN-SW [On/Off]

Indicates condition of unlock signal from door key cylinder switch.

RKE-LOCK [On/Off]

Indicates condition of lock signal from Intelligent Key.

RKE-UNLOCK [On/Off]

Indicates condition of unlock signal from Intelligent Key.

Monitor Item [Unit]

Description

Test Item

Description

INT LAMP

This test is able to check interior room lamp operation [On/Off].

Support Item

Setting

Description

SET I/L D-UNLCK INTCON

On

Interior room lamp timer function ON.

Off*

Interior room lamp timer function OFF.

FOG LAMP OVERRIDE

On

Fog lamp override function ON.

Off*

Fog lamp override function OFF.

Monitor Item [Unit]

Description

PUSH SW [On/Off]

Indicates condition of push-button ignition switch.

ENGINE STATE [STOP/STALL/CRANK/
RUN]

Indicates engine status received from ECM on CAN communication line.

VEH SPEED 1 [km/h]

Indicates vehicle speed signal received from ABS on CAN communication line.

TURN SIGNAL R [On/Off]

Indicates condition of combination switch.

TURN SIGNAL L [On/Off]

TAIL LAMP SW [On/Off]

HI BEAM SW [On/Off]

HEAD LAMP SW [On/Off]

LIGHT OFF SW [On/Off]

PASSING SW [On/Off]

AUTO LIGHT SW [On/Off]

FR FOG SW [On/Off]

DOOR SW-DR [On/Off]

Indicates condition of front door switch LH.

DOOR SW-AS [On/Off]

Indicates condition of front door switch RH.

DOOR SW-RR [On/Off]

Indicates condition of rear door switch RH.

DOOR SW-RL [On/Off]

Indicates condition of rear door switch LH.

DOOR SW-BK [On/Off]

Indicates condition of back door switch.

OPTI SEN (DTCT) [V]

Indicates outside brightness voltage signal from optical sensor.

BCS-20

< SYSTEM DESCRIPTION >

[WITH INTELLIGENT KEY SYSTEM]

DIAGNOSIS SYSTEM (BCM)

ACTIVE TEST

WORK SUPPORT

*: Initial setting

WIPER
WIPER : CONSULT Function (BCM - WIPER)

INFOID:0000000011280190

DATA MONITOR

OPTI SEN (FILT) [V]

Indicates outside brightness voltage signal from optical sensor filtered by BCM.

OPTICAL SENSOR [On/Off]

Indicates condition of optical sensor. 

Monitor Item [Unit]

Description

Test Item

Description

FR FOG LAMP

This test is able to check front fog lamp operation [On/Off].

STOP LAMP 1

This test is able to check rear combination lamp stop lamp operation [On/Off].

STOP LAMP 3

This test is able to check high-mounted stop lamp operation [On/Off].

DAYTIME RUNNING LIGHT 

This test is able to check daytime running light operation [On/Off].

ILL DIM SIGNAL 

This test is able to check illumination dimmer signal [On/Off].

Support Item

Setting

Description

TWILIGHT ON

MODE2*

Autolamp function ON.

MODE1

Autolamp function OFF.

CUSTOM A/LIGHT SETTING

MODE4

Less sensitive than normal setting (turns ON later).

MODE3

More sensitive than MODE2.

MODE2

More sensitive than normal setting (turns ON earlier).

MODE1*

Normal setting.

ILL DELAY SET

MODE 8

Autolamp delay timer.

MODE 7

MODE 6

MODE 4

MODE 5

MODE 3

MODE 2

MODE 1*

Monitor Item [Unit]

Description

PUSH SW [On/Off]

Indicates condition of push-button ignition switch.

VEH SPEED 1 [km/h]

Indicates vehicle speed signal received from ABS on CAN communication line.

FR WIPER HI [On/Off]

Indicates condition of wiper operation of combination switch.

FR WIPER LOW [On/Off]

FR WASHER SW [On/Off]

FR WIPER INT [On/Off]

FR WIPER STOP [On/Off]

Indicates front wiper auto stop signal received from IPDM E/R on CAN communication 
line.

INT VOLUME [1 

− 7] 

Indicates condition of intermittent wiper operation of combination switch.

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-21

< SYSTEM DESCRIPTION >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

ACTIVE TEST

WORK SUPPORT

*

: Initial Setting 

FLASHER
FLASHER : CONSULT Function (BCM - FLASHER)

INFOID:0000000011280191

DATA MONITOR

WORK SUPPORT

*: Initial setting

INTELLIGENT KEY
INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)

INFOID:0000000011280192

SELF DIAGNOSTIC RESULT

Refer to 

BCS-47, "DTC Index"

.

DATA MONITOR

RR WIPER ON [On/Off]

Indicates condition of rear wiper operation of combination switch.

RR WIPER INT [On/Off]

RR WASHER SW [On/Off]

RR WIPER STOP [On/Off]

Indicates rear wiper motor auto stop input from rear wiper motor.

Monitor Item [Unit]

Description

Test Item

Description

FR WIPER

This test is able to check front wiper operation [Hi/Lo/INT/Off].

RR WIPER

This test is able to check rear wiper operation [On/Off].

Support Item

Setting

Description

WIPER SPEED SETTING

On

Front wiper intermittent time linked with vehicle speed and wiper intermit-
tent dial position.

Off

*

Front wiper intermittent time is not linked with vehicle speed and wiper in-
termittent dial position.

Monitor Item [Unit]

Description

REQ SW -DR [On/Off]

Indicates condition of door request switch LH.

REQ SW -AS [On/Off]

Indicates condition of door request switch RH.

PUSH SW [On/Off]

Indicates condition of push-button ignition switch.

TURN SIGNAL R [On/Off]

Indicates condition of turn signal function of combination switch.

TURN SIGNAL L [On/Off]

HAZARD SW [On/Off]

Indicates condition of hazard switch.

RKE-LOCK [On/Off]

Indicates condition of lock signal from Intelligent Key.

RKE-UNLOCK [On/Off]

Indicates condition of unlock signal from Intelligent Key.

RKE-PANIC [On/Off]

Indicates condition of panic alarm signal from Intelligent Key.

Support Item

Setting

Description

3-TIME FLASHER SETTING 

On*

3-time flasher setting ON. 

Off

3-time flasher setting OFF.