|
|
Content .. 1022 1023 1024 1025 ..
MWI-40 < ECU DIAGNOSIS INFORMATION > COMBINATION METER DTC Index INFOID:0000000009480374 NOTE: “TIME” indicates the following. • 0: Indicates that a malfunction is detected at present. • 1-63: Indicates that a malfunction was detected in the past. (Displays number of ignition switch OFF → ON cycles after malfunction is detected. Self-diagnosis result is erased when “63” is exceeded.) Warning lamp/indicator lamp ABS warning lamp Lamp turns on when communication is lost. Brake warning lamp VDC OFF indicator lamp Malfunction indicator lamp SLIP indicator lamp AT oil temp warning lamp Lamp turns off when communication is lost. Low washer fluid warning lamp Hill descent control indicator lamp Door open warning lamp CRUISE indicator lamp SET indicator lamp O/D OFF indicator lamp Oil pressure warning lamp Air bag warning lamp High beam indicator Turn signal indicator lamp Driver and passenger seat belt warn- Lamp turns off when disconnected. Charge warning lamp Security indicator lamp 4WD indicator lamp ATP indicator lamp Differential lock indicator lamp Low tire pressure warning lamp Lamp will flash every second for 1 minute and then stay on con- Function Specifications CONSULT display Malfunction Reference page CAN COMM CIRC Malfunction is detected in CAN communication. CAUTION: Even when there is no malfunction on CAN communication system, malfunction may be VEHICLE SPEED Malfunction is detected when an erroneous speed signal is input. CAUTION: Even when there is no malfunction on speed signal system, malfunction may be misin- |