Nissan Leaf. Manual - part 362

 

  Index      Nissan     Nissan Leaf (2011-2014 year) - Service and Repair Manual

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  360  361  362  363   ..

 

 

Nissan Leaf. Manual - part 362

 

 

CCS-2

< PRECAUTION >

PRECAUTIONS

PRECAUTION

PRECAUTIONS

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT 
PRE-TENSIONER"

INFOID:0000000010432042

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along

with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain

types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS

system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front

air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.

Information necessary to service the system safely is included in the SR and SB section of this Service Man-

ual.

WARNING:

• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in

the event of a collision which would result in air bag inflation, all maintenance must be performed by

an authorized NISSAN/INFINITI dealer.

• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal

injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag

Module, see the SR section.

• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this

Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-

ness connectors.

PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS

WARNING:

• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-

tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a

hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing

serious injury.

• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the

battery and wait at least three minutes before performing any service.

CCS

AUTOMATIC SPEED CONTROL DEVICE (ASCD)

CCS-3

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

SYSTEM DESCRIPTION

AUTOMATIC SPEED CONTROL DEVICE (ASCD)

Information

INFOID:0000000010120148

Automatic Speed Control Device (ASCD) system is controlled by VCM.

Regarding the information for ASCD system, refer to 

EVC-64, "AUTOMATIC SPEED CONTROL DEVICE

(ASCD) : System Description"

.

CHG

CHG-1

ELECTRICAL & POWER CONTROL

C

D

E

F

G

H

I

J

K

L

B

SECTION 

CHG

A

O

P

N

CONTENTS

CHARGING SYSTEM

PRECAUTION ...............................................

2

PRECAUTIONS ...................................................

2

Precaution for Technicians Using Medical Electric 

......

2

Point to Be Checked Before Starting Maintenance 
Work ........................................................................
..

2

Precaution for Supplemental Restraint System 
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" .................................................................
..

2

Precaution for Removing 12V Battery .......................

3

SYSTEM DESCRIPTION  ..............................

4

COMPONENT PARTS  ........................................

4

Solar Cell Module ......................................................

4

SYSTEM ..............................................................

5

SOLAR CELL MODULE ..............................................

5

SOLAR CELL MODULE : System Description ..........

5

WIRING DIAGRAM .......................................

6

SOLAR CELL MODULE  ....................................

6

Wiring Diagram .........................................................

6

BASIC INSPECTION  ....................................

9

DARK CURRENT ...............................................

9

Work Procedure ........................................................

9

DTC/CIRCUIT DIAGNOSIS  .........................

10

SOLAR CELL MODULE  ...................................

10

Diagnosis Procedure  ...............................................

10

SYMPTOM DIAGNOSIS  ..............................

12

DISCHARGED 12V BATTERY  .........................

12

Description ...............................................................

12

Diagnosis Procedure  ...............................................

13

REMOVAL AND INSTALLATION ...............

15

SOLAR CELL MODULE  ...................................

15

Exploded View .........................................................

15

Removal and Installation  .........................................

15

 

 

 

 

 

 

 

Content   ..  360  361  362  363   ..