|
|
POWER SUPPLY AND GROUND CIRCUIT PWC-19 < DTC/CIRCUIT DIAGNOSIS > C D E F G H I J L M A B PWC N O P 1. Turn ignition switch OFF. 2. Check continuity between power window main switch harness connector and ground. Is the inspection result normal? YES >> INSPECTION END NO >> Repair or replace harness. 3. CHECK HARNESS CONTINUITY 1. Turn ignition switch OFF. 2. Disconnect BCM connector. 3. Check continuity between BCM harness connector and power window main switch harness connector. *1 : With Intelligent Key *2 : Without Intelligent Key 4. Check continuity between BCM harness connector and ground. *1 : With Intelligent Key *2 : Without Intelligent Key Is the inspection result normal? YES >> Replace BCM. Refer to BCS-57, "Removal and Installation" (With Intelligent Key). Refer to 99, "Removal and Installation" (Without Intelligent Key). NO >> Repair or replace harness. FRONT POWER WINDOW SWITCH (PASSENGER SIDE) FRONT POWER WINDOW SWITCH (PASSENGER SIDE) : Diagnosis Procedure INFOID:0000000005978512 1. CHECK POWER SUPPLY CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect front power window switch (passenger side) connector. 3. Turn ignition switch ON. 4. Check voltage between front power window switch (passenger side) harness connector and ground. Is the inspection result normal? YES >> INSPECTION END NO >> GO TO 2. Power window main switch Ground Continuity Connector Terminal D6 17 Existed BCM Power window main switch Continuity Connector Terminal Connector Terminal M70 *1 M67 *2 68 D5 10 Existed 69 D6 19 BCM Ground Continuity Connector Terminal M70 *1 M67 *2 68 Not existed 69 (+) (-) Condition Voltage (V) (Approx.) Front power window switch (passenger side) Connector Terminal D25 1 Ground Ignition switch ON 12 |