|
|
BCS DIAGNOSIS SYSTEM (BCM) BCS-17 < SYSTEM DESCRIPTION > [WITH INTELLIGENT KEY SYSTEM] C D E F G H I J K L B A O P N BCM BCM : CONSULT-III Function (BCM - BCM) INFOID:0000000006014835 WORK SUPPORT SIGNAL BUFFER SIGNAL BUFFER : CONSULT-III Function (BCM - SIGNAL BUFFER) INFOID:0000000006014840 DATA MONITOR ACTIVE TEST FR WIPER INT Displays the status of the FR WIPER INT switch in combination switch judged by BCM with the combination INT VOLUME Displays the status of wiper intermittent dial position judged by BCM with the combination switch reading RR WIPER ON Displays the status of the RR WIPER ON switch in combination switch judged by BCM with the combination RR WIPER INT Displays the status of the RR WIPER INT switch in combination switch judged by BCM with the combination RR WASHER SW Displays the status of the RR WASHER switch in combination switch judged by BCM with the combination TURN SIGNAL R Displays the status of the TURN RH switch in combination switch judged by BCM with the combination switch TURN SIGNAL L Displays the status of the TURN LH switch in combination switch judged by BCM with the combination switch TAIL LAMP SW Displays the status of the TAIL LAMP switch in combination switch judged by BCM with the combination HI BEAM SW Displays the status of the HI BEAM switch in combination switch judged by BCM with the combination switch HEAD LAMP SW 1 Displays the status of the HEADLAMP 1 switch in combination switch judged by BCM with the combination HEAD LAMP SW 2 Displays the status of the HEADLAMP 2 switch in combination switch judged by BCM with the combination PASSING SW Displays the status of the PASSING switch in combination switch judged by BCM with the combination switch FR FOG SW Displays the status of the FR FOG switch in combination switch judged by BCM with the combination switch RR FOG SW NOTE: Monitor item [UNIT] Description Item Description RESET SETTING VALUE Return a value set with Work Support of each system to a default value in factory shipment. Monitor item [UNIT] Description PUSH SW Displays the status of the push-button ignition switch (push switch) judged by BCM. Test item Opera- tion Description OIL PRESSURE SW Off OFF On BCM transmits the oil pressure switch signal to the combination meter via CAN communica- |