|
|
EC-1194 [YD (WITH EURO-OBD)] DTC P1273 FUEL PUMP DTC P1273 FUEL PUMP PFP:16700 Description EBS013G5 To control the amount of the fuel inhalation of the fuel pump, a plunger is built into the fuel pump. When the CONSULT-II Reference Value in Data Monitor Mode EBS013G6 Specification data are reference values. ECM Terminals and Reference Value EBS013G7 Specification data are reference values and are measured between each terminal and ground. CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in dam- MONITOR ITEM CONDITION SPECIFICATION PUMP CURRENT ● Engine: After warming up ● Air conditioner switch: OFF ● Shift lever: Neutral position ● No-load Idle 1,700 - 1,900 mA 2,000 rpm 1,600 - 1,800 mA TERMI- NAL NO. WIRE COLOR ITEM CONDITION DATA (DC Voltage and Pulse Signal) 10 Y/L Fuel pump power supply [Engine is running] ● Warm-up condition ● Idle speed 0 - 12.5V [Engine is running] ● Warm-up condition ● Engine speed is 2,000 rpm 0 - 12.5V MBIB0885E MBIB0886E |