|
|
содержание .. 143 144 145 146 ..
SQUEAK AND RATTLE TROUBLE DIAGNOSES GW-3 < SYMPTOM DIAGNOSIS > C D E F G H I J L M A B GW N O P If possible, drive the vehicle with the customer until the noise is duplicated. Note any additional information on vehicle body. CHECK RELATED SERVICE BULLETINS After verifying the customer concern or symptom, check ASIST for Technical Service Bulletins (TSBs) related LOCATE THE NOISE AND IDENTIFY THE ROOT CAUSE 1. Narrow down the noise to a general area. To help pinpoint the source of the noise, use a listening tool 2. Narrow down the noise to a more specific area and identify the cause of the noise by: • Removing the components in the area that is are suspected to be the cause of the noise. Do not use too much force when removing clips and fasteners, otherwise clips and fastener can be broken • Tapping or pushing/pulling the component that is are suspected to be the cause of the noise. Do not tap or push/pull the component with excessive force, otherwise the noise will be eliminated only tem- • Feeling for a vibration by hand by touching the component(s) that is are suspected to be the cause of the noise. • Placing a piece of paper between components that are suspected to be the cause of the noise. . REPAIR THE CAUSE • If the cause is a loose component, tighten the component securely. thane tape. A Nissan Squeak and Rattle Kit (J-43980) is available through the authorized Nissan Parts CAUTION: Never use excessive force as many components are constructed of plastic and may be damaged. NOTE: × 135 mm (3.937 × 5.315 in) • 76884-71L01: 60 × 85 mm (2.362 × 3.346 in) • 76884-71L02:15 × 25 mm (0.591 × 0.984 in) INSULATOR (Foam blocks) × 50 mm (1.969 × 1.969 in) • 73982-50Y00: 10 mm (0.394 in) thick, 50 × 50 mm (1.969 × 1.969 in) INSULATOR (Light foam block) × 50 mm (1.181 × 1.969in) FELT CLOTHTAPE |