|
|
содержание .. 526 527 528 529 ..
EC-120 < SYSTEM DESCRIPTION > [VQ35DE] ON BOARD DIAGNOSTIC (OBD) SYSTEM PURG VOL C/V % • Indicates the EVAP canister purge volume con- trol solenoid valve control value computed by the • The opening becomes larger as the value in- creases. INT/V TIM (B1) ° CA • Indicates [ ° CA] of intake camshaft advance an- gle. INT/V TIM (B2) INT/V SOL-B1 % • The control value of the intake valve timing con- trol solenoid valve (determined by ECM accord- • The advance angle becomes larger as the value increases. INT/V SOL-B2 VIAS S/V-1 ON/OFF • The control condition of the VIAS control solenoid valve 1 (determined by ECM according to the in- VIAS S/V-2 ON/OFF • The control condition of the VIAS control solenoid valve 2 (determined by ECM according to the in- AIR COND RLY ON/OFF • The air conditioner relay control condition (deter- mined by ECM according to the input signals) is ENGINE MOUNT IDLE/TRVL • The control condition of the electronic controlled engine mount (determined by ECM according to FUEL PUMP RLY ON/OFF • Indicates the fuel pump relay control condition determined by ECM according to the input sig- VENT CONT/V ON/OFF • The control condition of the EVAP canister vent control valve (determined by ECM according to THRTL RELAY ON/OFF • Indicates the throttle control motor relay control condition determined by the ECM according to COOLING FAN HI/MID/LOW/ OFF • The control condition of the cooling fan (deter- mined by ECM according to the input signals) is HO2S2 HTR (B1) ON/OFF • Indicates [ON/OFF] condition of heated oxygen sensor 2 heater determined by ECM according to HO2S2 HTR (B2) I/P PULLY SPD rpm • Indicates the engine speed computed from the in- put speed sensor signal. VEHICLE SPEED km/h or mph • The vehicle speed computed from the vehicle speed signal sent from TCM is displayed. Monitored item Unit Description Remarks |