|
|
AUTOMATIC DRIVE POSITIONER SE-45 C D E F G H J K L M A B SE Revision: 2004 November 2004 Murano DATA MONITOR SELECTIOM FROM MEMU ACTIVE TEST CAUTION: During vehicle driving, do not perform active test. Monitor item [OPERATION or UNIT] Contents SLIDE SW–FR “ON/OFF” ON/OFF status judged from the sliding switch (FR) signal is displayed. SLIDE SW–RR “ON/OFF” ON/OFF status judged from the sliding switch (RR) signal is displayed. RECLN SW–FR “ON/OFF” ON/OFF status judged from the reclining switch (FR) signal is displayed. RECLN SW–RR “ON/OFF” ON/OFF status judged from the reclining switch (RR) signal is displayed. LIFT FR SW–UP “ON/OFF” ON/OFF status judged from the FR lifter switch (UP) signal is displayed. LIFT FR SW–DN “ON/OFF” ON/OFF status judged from the FR lifter switch (DOWN) signal is displayed. LIFT RR SW–UP “ON/OFF” ON/OFF status judged from the RR lifter switch (UP) signal is displayed. LIFT RR SW–DN “ON/OFF” ON/OFF status judged from the RR lifter switch (DOWN) signal is displayed. MIR CON SW–UP “ON/OFF” ON/OFF status judged from the door mirror remote control switch (UP) signal is MIR CON SW–DN “ON/OFF” ON/OFF status judged from the door mirror remote control switch (DOWN) signal MIR CON SW–RH “ON/OFF” ON/OFF status judged from the door mirror remote control switch (RIGHT) signal MIR CON SW–LH “ON/OFF” ON/OFF status judged from the door mirror remote control switch (LEFT) signal s MIR CHNG SW–R “ON/OFF” ON/OFF status judged from the door mirror remote control switch (switching to MIR CHNG SW–L “ON/OFF” ON/OFF status judged from the door mirror remote control switch (switching to SET SW “ON/OFF” ON/OFF status judged from the setting switch signal is displayed. PEDAL SW-FR “ON/OFF” ON/OFF status judged from the pedal adjusting switch (FR) signal is displayed. PEDAL SW-RR “ON/OFF” ON/OFF status judged from the pedal adjusting switch (RR) signal is displayed. MEMORY SW1 “ON/OFF” ON/OFF status judged from the seat memory switch 1 signal is displayed. MEMORY SW2 “ON/OFF” ON/OFF status judged from the seat memory switch 2 signal is displayed. DETENT SW “ON/OFF” The selector lever position “OFF (P position) / ON (other than P position)” judged STARTER SW “ON/OFF” Ignition key switch ON (START, ON) /OFF (ignition switch IGN, ACC, or OFF) SLIDE PULSE — Value (32768) when battery connects is as standard. If it moves backward, the RECLN PULSE — Value (32768) when battery connects is as standard. If it moves backward, the LIFT FR PULSE — Value (32768) when battery connects is as standard. If it moves DOWN, the value LIFT RR PULSE — Value (32768) when battery connects is as standard. If it moves DOWN, the value MIR/SEN RH R–L “V” Voltage output from RH door mirror sensor (LH/RH) is displayed. MIR/SEN RH U–D “V” Voltage output from RH door mirror sensor (UP/DOWN) is displayed. MIR/SEN LH R–L “V” Voltage output from LH door mirror sensor (LH/RH) is displayed. MIR/SEN LH U–D “V” Voltage output from LH door mirror sensor (UP/DOWN) is displayed. PEDAL SEN “V” The pedal position (voltage) judged from the pedal adjust sensor signal is dis- |