|
|
содержание .. 305 306 307 308 ..
DAS-118 < SYSTEM DESCRIPTION > [BSW] HANDLING PRECAUTION HANDLING PRECAUTION Precautions for Blind Spot Warning INFOID:0000000009723324 REAR VIEW CAMERA HANDLING The rear view camera for the LDW/BSW systems is located above the rear licence plate. To keep the proper blower. • Do not attach “licence plate accessory” that reflect light. BLIND SPOT WARNING (BSW) • The BSW system is not a replacement for proper driving procedure and is not designed to prevent contact with vehicles or objects. When changing lanes, always use the side and rear mirrors and turn and look in the • The rear view camera may not detect properly under the following conditions: passes under a bridge.) • Automatic washer and blower may not be able to secure detection capability when excessive dirt adheres on the camera lens. • The camera unit may not be able to detect when certain objects are present such as: tion of a vehicle with long wheelbase(e.g. trailer truck, semi-trailer, tractor). • The rear view camera detection zone is designed based on a standard lane width. When driving in a wider lane, the camera unit may not detect vehicles in an adjacent lane. When driving in a narrow lane, the camera • The rear view camera is designed to ignore most stationary objects, however objects such as guardrails, walls, foliage and parked vehicles may occasionally be detected. This is a normal operating condition. • The rear view camera may detect reflection image of vehicles or roadside objects that are not actually in the detection zone, especially when the road is wet. |