Nissan X-Trail 32. Manual - part 1602

 

  Главная      Nissan     Nissan X-Trail 32 - Service Manual

 

поиск по сайту            

 

 

 

 

 

 

 

 

 

содержание   ..  1600  1601  1602  1603   ..

 

 

Nissan X-Trail 32. Manual - part 1602

 

 

MWI-90

< SYSTEM DESCRIPTION >

DIAGNOSIS SYSTEM (COMBINATION METER)

ASCD SPD BLNK
[On/Off]

Blinking status of ASCD or speed limiter set vehicle speed that is judged by the 
ASCD status signal received from ECM via CAN communication.

ASCD STATUS
[Off, ASCD, CRUISE, SL ON, SL 
SET]

Display status of ASCD and speed limiter status display judged by the ASCD sta-
tus signal received from ECM via CAN communication.

ASCD REQ SPD
[km/h/Off]

ASCD set vehicle speed value judged by the ASCD status signal received from 
ECM via CAN communication.

E/O CHG TMNG RST
[On/Off]

Resetting of a remaining distance to the engine oil change time.

ECO DRIVE NAVI
[LEVEL 0 - 30]

Status of ECO pedal guide detected from ECO pedal guide signal received from 
ECM via CAN communication.

BATTRY CIRCUIT STATUS
[NORMAL/OPEN]

Status of fuse for shipping mode from shipping mode status signal received from 
BCM via CAN communication.

STRG SW INPUT
[SW1-SW10, NO INPUT]

Status of steering switch.

ITS SONAR SET OUTPUT
[NO SW ST,  LDW OFF, LDW ON, 
BSW OFF, BSW ON, P MV OFF, P 
MV ON, SONAR OFF, SONAR ON, 
P SEN OFF, P SEN ON, P SEN 
FRONT, P BUZ HIGH, P BUZ MED, 
P BUZ LOW, P RNG FAR, P RNG 
MED, P RNG NEAR]

Status of Driving Aids and Parking Aids set on the information display of the com-
bination meter.

SONAR DET STATUS
[On/Off]

Activation status of sonar system received from sonar control unit via CAN com-
munication.

SONAR WARN
[Off/DEACT/ERROR]

Status of parking sensor error detected from parking sensor error signal is re-
ceived from sonar control unit via CAN communication.

SONAR DET DSP RC
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]

Status of center sensor rear detection obstacle from sonar control unit via CAN 
communication.

SONAR DET DSP AREA RC
[On/Off]

Activation status of center sensor rear judged from a sonar indicator signal re-
ceived from the sonar control unit via CAN communication.

SONAR DET DSP RL
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]

Status of corner sensor rear LH detection obstacle from sonar control unit via CAN 
communication.

SONAR DET DSP AREA RL
[On/Off]

Activation status of corner sensor rear LH judged from a sonar indicator signal re-
ceived from the sonar control unit via CAN communication.

SONAR DET DSP RR
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]

Status of corner sensor rear RH detection obstacle from sonar control unit via 
CAN communication.

SONAR DET DSP AREA RR
[On/Off]

Activation status of corner sensor rear RH judged from a sonar indicator signal re-
ceived from the sonar control unit via CAN communication.

SONAR DET DSP FC
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]

Status of center sensor front detection obstacle from sonar control unit via CAN 
communication.

SONAR DET DSP AREA FC
[On/Off]

Activation status of center sensor front judged from a sonar indicator signal re-
ceived from the sonar control unit via CAN communication.

SONAR DET DSP FL
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]

Status of corner sensor front LH detection obstacle from sonar control unit via 
CAN communication.

SONAR DET DSP AREA FL
[On/Off]

Activation status of corner sensor front LH judged from a sonar indicator signal re-
ceived from the sonar control unit via CAN communication.

SONAR DET DSP FR
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]

Status of corner sensor front RH detection obstacle from sonar control unit via 
CAN communication.

SONAR DET DSP AREA FR
[On/Off]

Activation status of corner sensor front RH judged from a sonar indicator signal 
received from the sonar control unit via CAN communication.

SONAR DIST DSP
[Off/stop/30cm/40cm/50cm/60cm]

Sonar of information display of sonar sensor detection distance from sonar control 
unit via CAN communication.

Display item [Unit]

MAIN

SIGNALS

Description

MWI

DIAGNOSIS SYSTEM (COMBINATION METER)

MWI-91

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

WARNING HISTORY

• Stores histories when warning/indicator lamp is turned on.
• “WARNING HISTORY” indicates the “TIME” when the warning/ indicator lamp is turned on.
• The “TIME” above is:
- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine

and waiting for 30 seconds.

- 1 - 39: The number of times the engine was restarted after the 0 condition.
- NO WARNING HISTORY: Stores NO (0) turning on history of warning/indicator lamp.
NOTE:
• WARNING HISTORY is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets

low.

Display Item

FCW IND
[Off]

NOTE:
This item is displayed, but cannot be monitored.

LDW IND
[On/Off]

Status of LDW system display detected from meter display signal is received from 
front camera unit via CAN communication.

TIRE PRESS FR
[kPa, kg/cm2 or Psi]

The data of front RH tire pressure from BCM via CAN communication.

TIRE PRESS FL
[kPa, kg/cm2 or Psi]

The data of front LH tire pressure from BCM via CAN communication.

TIRE PRESS RR
[kPa, kg/cm2 or Psi]

The data of rear RH tire pressure from BCM via CAN communication.

TIRE PRESS RL
[kPa, kg/cm2 or Psi]

The data of rear LH tire pressure from BCM via CAN communication.

BSW IND
[On/Off]

Status of BSW system display detected from meter display signal is received from 
around view monitor control unit via CAN communication.

DIPPED BEAM IND
[On/Off]

Status of dipped beam indicator lamp judged from low beam request signal re-
ceived from BCM via CAN communication.

HI-BEAM ASST IND
[Off]

NOTE:
This item is displayed, but cannot be monitored.

CHASSIS CONTROL WARN
[On/Off]

Status of chassis control display (warning) from chassis control malfunction signal 
is received from chassis control module via CAN communication.

LCD
[Off]

NOTE:
This item is displayed, but cannot be monitored.

Display item [Unit]

MAIN

SIGNALS

Description

Display item

Description

ABS W/L

Lighting history of ABS warning lamp.

VDC/TCS IND

Lighting history of VDC OFF indicator lamp.

SLIP IND

Lighting history of VDC warning lamp.

BRAKE W/L

Lighting history of brake warning lamp.

DOOR W/L

Lighting history of door warning.

OIL W/L

Lighting history of engine oil pressure warning.

C-ENG W/L

Lighting history of malfunction indicator lamp (MIL) (yellow).

C-ENG2 W/L

Lighting history of malfunction indicator lamp (MIL) (red).

4WD W/L

Lighting history of 4WD warning.

FUEL W/L

Lighting history of low fuel warning.

AIR PRES W/L

Lighting history of low tire pressure warning lamp.

KEY G/Y W/L

Lighting history of Intelligent key system malfunction.

EPS W/L

Lighting history of electric power steering warning lamp.

MWI-92

< SYSTEM DESCRIPTION >

DIAGNOSIS SYSTEM (COMBINATION METER)

NOTE:

In items displayed on the CONSULT screen, only those listed in the above table are used.

DDS W/L

Lighting history of hill descent control indicator lamp.

CHAGE W/L

Lighting history of charge warning.

FILTER W/L

Lighting history of water-in-fuel-filter warning lamp.

Display item

Description

MWI

COMBINATION METER

MWI-93

< ECU DIAGNOSIS INFORMATION >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

ECU DIAGNOSIS INFORMATION

COMBINATION METER

Reference Value

INFOID:0000000010714998

VALUES ON THE DIAGNOSIS TOOL

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

Monitor Item

Condition

Value/Status

SPEED METER
[mph or km/h]

Ignition switch ON

While driving

Input value of vehicle speed signal 
(CAN communication signal)

SPEED OUTPUT
[mph or km/h]

Ignition switch ON

While driving

Output value of vehicle speed sig-
nal (CAN communication signal)

ODO OUTPUT
[mph or km/h]

Ignition switch ON

Output value of odometer signal 
(CAN communication signal)

TACHO METER
[rpm]

Ignition switch ON

Engine running

Input value of engine speed signal 
(CAN communication signal)

FUEL METER
[L]

Ignition switch ON

Input value of fuel level sensor sig-
nal

W TEMP METER
[

°

F] or [

°

C]

Ignition switch ON

Input value of engine coolant tem-
perature signal (CAN communica-
tion signal)

ABS W/L

Ignition switch ON

ABS warning lamp ON

On

ABS warning lamp OFF

Off

VDC/TCS IND

Ignition switch ON

VDC OFF indicator lamp ON

On

VDC OFF indicator lamp OFF

Off

SLIP IND

Ignition switch ON

VDC warning lamp ON

On

VDC warning lamp OFF

Off

BRAKE W/L

Ignition switch ON

Brake warning lamp ON

On

Brake warning lamp OFF

Off

DOOR W/L

Ignition switch ON

During door open warning indication

On

Except during door open warning indica-
tion

Off

TRUNK/GLAS-H

Ignition switch ON

NOTE:
This item is displayed, but cannot be mon-
itored.

Off

HI-BEAM IND

Ignition switch ON

High beam indicator lamp ON

On

High beam indicator lamp OFF

Off

TURN IND

Ignition switch ON

Turn signal indicator lamp ON

On

Turn signal indicator lamp OFF

Off

FR FOG IND

Ignition switch ON

Front fog lamp indicator lamp ON

On

Front fog lamp indicator lamp OFF

Off

RR FOG IND

Ignition switch ON

Rear fog lamp indicator lamp ON

On

Rear fog lamp indicator lamp OFF

Off

LIGHT IND

Ignition switch ON

Position lamp indicator lamp ON

On

Position lamp indicator lamp OFF

Off

 

 

 

 

 

 

 

содержание   ..  1600  1601  1602  1603   ..