|
|
содержание .. 502 503 504 505 ..
GW-12 BACK DOOR WINDOW GLASS WARNING: When cutting the glass from the vehicle, always wear safety glasses and heavy gloves to help prevent CAUTION: When a rear window glass is reused, do not use a cutting knife or power cutting tool. NOTE: ● Be careful not to scratch the glass when removing. ● Do not set or stand the glass on its edge. Small chips may develop into cracks. Installation ● Use a genuine Nissan Urethane Adhesive Kit or equivalent and follow the instructions furnished with it. ● While the urethane adhesive is curing, open a door window. This will prevent the glass from being forced ● The molding must be installed securely so that it is in position and leaves no gap. ● Inform the customer that the vehicle should remain stationary until the urethane adhesive has completely WARNING: ● Keep heat and open flames away as primers and adhesive are flammable. ● The materials contained in the kit are harmful if swallowed, and may irritate skin and eyes. Avoid ● Use in an open, well ventilated location. Avoid breathing the vapors. They can be harmful if ● Driving the vehicle before the urethane adhesive has completely cured may affect the perfor- CAUTION: ● Do not use an adhesive which is past its usable term. Shelf life of this product is limited to six ● Keep primers and adhesive in a cool, dry place. Ideally, they should be stored in a refrigerator. ● Do not leave primers or adhesive cartridge unattended with their caps open or off. PIIA0186E |