|
|
содержание .. 420 421 422 423 ..
EM-34 [YD] GLOW PLUG GLOW PLUG PFP:22401 Removal and Installation EBS00SNQ REMOVAL CAUTION: Remove glow plug only if necessary. If carbon adheres, it may be stuck and broken. 1. Disconnect harness connector from glow plate. 2. Remove glow nut to remove glow plate. 3. Remove glow plug. CAUTION: ● When removing or installing, do not use such tools as an air impact wrench. ● Handle it carefully without giving any impact, even after removal. [As a guide, if it drops from INSTALLATION 1. Remove adhered carbon from glow plug installation hole with a reamer. 2. Install glow plug. 3. Install remaining parts in reverse order of removal. SBIA0165E 1. Glow plate 2. Glow harness 3. Glow nut 4. Cap 5. Glow plug |