содержание .. 67 68 69 70 ..
Nissan Primera P12. Manual - part 69
SMART ENTRANCE CONTROL SYSTEM
BCS-9
C
D
E
F
G
H
I
J
L
M
A
B
BCS
SLEEP/WAKE-UP CONTROL
Sleep Control
“Sleep” control prevents unnecessary power consumption. After the following conditions are met, the smart
entrance control unit suspends the operation. The whole smart entrance control unit is set in the “sleep” mode.
●
Ignition switch “OFF”
●
All electrical loads (in the smart entrance control unit) “OFF”
●
Timer “OFF”
●
Each switch do not input
Wake-up Control
When the smart entrance control unit detects a “wake-up” signal, it wakes up the whole system and starts
operating again. When any one of the following switches are turned ON, the “sleep” mode is canceled:
●
Ignition switch
●
Hazard switch
●
Headlamp switch
●
Hood switch
●
Trunk room lamp switch (sedan models)
●
Back door switch (hatchback or wagon models)
●
Each door switch
●
Trunk release switch (sedan models)
●
Back door release switch (hatchback or wagon models)
●
External trunk release switch (sedan models)
●
External back door release switch (hatchback or wagon models)
INPUT/OUTPUT
System
Input
Output
Power door lock
Door lock/unlock switch
Key switch (Insert)
Door switches
Trunk or back door release switch
External trunk or back door release switch
Door lock actuators
Trunk or back door release actuator
Multi-remote control
Key switch (Insert)
Ignition switch (ON)
Door switches
Key fob signal
Door lock/unlock switch
Hazard warning lamp
Door lock actuator
Warning chime
Key switch (Insert)
Ignition switch (ON)
Lighting switch (1st)
Seat belt switch
Front door switch LH
Warning chime (located in smart entrance
control unit)
Rear window defogger and door mirror
defogger
Ignition switch (ON)
Rear window defogger switch
Rear window defogger relay