|
|
Content .. 2215 2216 2217 2218 ..
DAS-282 < DTC/CIRCUIT DIAGNOSIS > [CHASSIS CONTROL] C1BC5-00 SIDE G SENSOR C1BC5-00 SIDE G SENSOR DTC Description INFOID:0000000010417037 DTC DETECTION LOGIC POSSIBLE CAUSE • Yaw rate/side/decel G sensor [integrated in ABS actuator and electric unit (control unit)] FAIL-SAFE The following functions are suspended. DTC CONFIRMATION PROCEDURE 1. PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF >> GO TO 2. 2. CHECK DTC DETECTION With CONSULT 1. Turn the ignition switch OFF to ON. CAUTION: Be sure to wait of 10 seconds after turning ignition switch OFF or ON. 2. Perform self-diagnosis for “CHASSIS CONTROL”. Is DTC “C1BC5-00” detected? YES >> Proceed to DAS-282, "Diagnosis Procedure" NO-1 >> To check malfunction symptom before repair: Refer to GI-41, "Intermittent Incident" . NO-2 >> Confirmation after repair: INSPECTION END Diagnosis Procedure INFOID:0000000010417038 1. CHECK SIDE G SENSOR SYSTEM With CONSULT Perform self-diagnosis for “ABS”. YES >> Check the DTC. Refer to . NO >> GO TO 2. 2. PERFORM SELF-DIAGNOSIS With CONSULT 1. Erase self-diagnosis result for “CHASSIS CONTROL”. 2. Turn the ignition switch OFF and wait for 10 seconds or more. 3. Turn the ignition switch ON. 4. Perform “All DTC Reading”. Is DTC “C1BC5-00”, “U1000-00” or other DTC detected? YES (“C1BC5-00”)>>Replace the chassis control module. Refer to DAS-312, "Removal and Installation" . YES (“U1000-00”)>>Refer to DAS-286, "Diagnosis Procedure" YES (other DTC)>>Check the DTC. DTC Display Item (Trouble diagnosis content) Malfunction detected condition C1BC5-00 SIDE G SENSOR When a malfunction is detected in side G sensor system. |