|
|
EXL-192 < SYMPTOM DIAGNOSIS > [HALOGEN TYPE] EXTERIOR LIGHTING SYSTEM SYMPTOMS With Daytime Running Light System NOTE: Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected. Turn signal indicator lamp One side Combination meter — Both sides • Turn indicator signal • Combination meter Data monitor “TURN IND” • BCM (FLASHER) Active test “FLASHER” Both sides • Combination meter power supply/ ground circuit • Combination meter Combination meter • Hazard warning lamp does not activate (Turn signal is normal) • Hazard warning lamp continues activating • Hazard switch signal/ground cir- cuit • Hazard switch Hazard switch Symptom Possible cause Inspection item Symptom Possible cause Inspection item Headlamp (HI) is not turned One side • Fuse ground circuit • Daytime running light relay Headlamp (HI) circuit Both sides Symptom diagnosis EXL-198, "Diagnosis Procedure" High beam indicator lamp is not turned ON Combination meter • Combination meter Data monitor “HI-BEAM IND” • BCM (HEAD LAMP) Active test “HEAD LAMP” Headlamp (LO) is not One side • Fuse ground circuit • Headlamp (LO) bulb (Xenon bulb) • Headlamp assembly Headlamp (LO) circuit Both sides Symptom diagnosis EXL-199, "Diagnosis Procedure" Parking lamp is not turned ON • Parking lamp power supply/ ground circuit • Front combination lamp Parking lamp circuit Front side marker lamp is not turned ON • Front side marker lamp power supply/ground circuit • Front side marker lamp bulb et Front side marker lamp circuit |