Nissan Juke F15. Manual - part 1305

TM-410

< ECU DIAGNOSIS INFORMATION >

[CVT: RE0F10D]

TCM

P0711

• Start  is  slow
• Acceleration is slow

Engine coolant temperature when engine start:
Temp. 

≥ 10°C (50°F)

• Selector shock is large
• Start  is  slow
• Acceleration is slow

Engine coolant temperature when engine start:
−35°C (−31°F) ≤ Temp. < 10°C (50°F)

• Selector shock is large
• Start  is  slow
• Acceleration is slow

Engine coolant temperature when engine star:
Temp. < 

−35°C (−31°F)

P0712

• Start  is  slow
• Acceleration is slow

Engine coolant temperature when engine start:
Temp. 

≥ 10°C (50°F)

• Selector shock is large
• Start  is  slow
• Acceleration is slow

Engine coolant temperature when engine start:
−35°C (−31°F) ≤ Temp. < 10°C (50°F)

• Selector shock is large
• Start  is  slow
• Acceleration is slow

Engine coolant temperature when engine star:
Temp. < 

−35°C (−31°F)

P0713

• Start  is  slow
• Acceleration is slow

Engine coolant temperature when engine start:
Temp. 

≥ 10°C (50°F)

• Selector shock is large
• Start  is  slow
• Acceleration is slow

Engine coolant temperature when engine start:
−35°C (−31°F) ≤ Temp. < 10°C (50°F)

• Selector shock is large
• Start  is  slow
• Acceleration is slow

Engine coolant temperature when engine star:
Temp. < 

−35°C (−31°F)

P0715

• Start  is  slow
• Acceleration is slow
• Lock-up is not performed
• Manual mode is not activated

—

P0717

• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

P0740

• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

P0743

• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

P0744

• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

P0746

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

P0776

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed
• Vehicle speed is not increased

When a malfunction occurs on the low oil pressure side

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

When a malfunction occurs on the high oil pressure side

P0778

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

DTC

Vehicle behavior

Conditions of vehicle

TCM

TM-411

< ECU DIAGNOSIS INFORMATION >

[CVT: RE0F10D]

C

E

F

G

H

I

J

K

L

M

A

B

TM

N

O

P

P0779

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

P0826

Manual mode is not activated

P0841

Not changed from normal driving

P0847

Not changed from normal driving

—

P0848

Not changed from normal driving

—

P084C

Not changed from normal driving

P084D

Not changed from normal driving

P0863

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

P0890

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed
• Vehicle speed is not increased

P0962

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

P0963

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

P0965

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

When a malfunction occurs on the low oil pressure side

• Selector shock is large
• Lock-up is not performed

When a malfunction occurs on the high oil pressure side

P0966

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

P0967

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

P17F0

Not changed from normal driving

—

P17F1

Not changed from normal driving

—

P17F2

Not changed from normal driving

—

P2765

• Start  is  slow
• Acceleration is slow
• Lock-up is not performed
• Manual mode is not activated

—

P2813

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Vehicle speed is not increased

When a malfunction occurs on the low oil pressure side

Selector shock is large

When a malfunction occurs on the high oil pressure side

P2814

Selector shock is large

—

P2815

Selector shock is large

—

DTC

Vehicle behavior

Conditions of vehicle

TM-412

< ECU DIAGNOSIS INFORMATION >

[CVT: RE0F10D]

TCM

Protection Control 

INFOID:0000000012201116

The TCM becomes the protection control status temporarily to protect the safety when the safety of TCM and

transmission is lost. It automatically returns to the normal status if the safety is secured.

The TCM has the following protection control.

CONTROL FOR WHEEL SPIN

TORQUE IS REDUCED WHEN DRIVING WITH THE REVERSE GEAR

CONTROL WHEN FLUID TEMPERATURE IS HIGH

REVERSE PROHIBIT CONTROL

U0073

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

U0100

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

U0102

Not changed from normal driving

—

U0140

Not changed from normal driving

—

U0141

Not changed from normal driving

—

U0155

Not changed from normal driving

—

U0164

Not changed from normal driving

—

U0300

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

U1000

Not changed from normal driving

—

U1117

Not changed from normal driving

—

DTC

Vehicle behavior

Conditions of vehicle

Control

When a wheel spin is detected, the engine output and gear ratio are limited and the line pressure is increased.
Limits engine output when a wheel spin occurs in any of right and left drive wheels.

Vehicle behavior in 
control 

If the accelerator is kept depressing during wheel spin, the engine revolution and vehicle speed are limited to 
a certain degree. 

Normal return condi-
tion

Wheel spin convergence returns the control to the normal control.

Control

Engine output is controlled according to a vehicle speed while reversing the vehicle.

Vehicle behavior in 
control 

Power performance may be lowered while reversing the vehicle.

Normal return condi-
tion

Torque returns to normal by positioning the selector lever in a range other than “R” position.

Control

When the CVT fluid temperature is high, the gear shift permission maximum revolution and the maximum 
torque are reduced than usual to prevent increase of the oil temperature. 

Vehicle behavior in 
control 

Power performance may be lowered, compared to normal control.

Normal return condi-
tion

The control returns to the normal control when CVT fluid temperature is lowered.

TCM

TM-413

< ECU DIAGNOSIS INFORMATION >

[CVT: RE0F10D]

C

E

F

G

H

I

J

K

L

M

A

B

TM

N

O

P

DTC Inspection Priority Chart

INFOID:0000000012201117

If multiple malfunction codes are detected at the same time, check each code according to the DTC check pri-

ority list below. 

Control

The reverse brake is controlled to avoid becoming engaged when the selector lever is set in “R” position while 
driving in forward direction at more than the specified speed.

Vehicle behavior in 
control 

If the selector lever is put at “R” position when driving with the forward gear, the gear becomes neutral, not 
reverse. 

Normal return condi-
tion

The control returns to normal control when the vehicle is driven at low speeds. (The reverse brake becomes 
engaged.)

Priority

DTC

Items

(CONSULT screen terms)

Reference

1

P0863

CONTROL UNIT (CAN)

TM-506, "DTC Logic"

U0073

COMM BUS A OFF

TM-444, "DTC Logic"

U0100

LOST COMM (ECM A)

TM-445, "DTC Logic"

U0102

LOST COMM (TRANSFER)

TM-446, "DTC Logic"

U0140

LOST COMM (BCM)

TM-447, "DTC Logic"

U0141

LOST COMM (BCM A)

TM-448, "DTC Logic"

U0155

LOST COMM (IPC)

TM-449, "DTC Logic"

U0164

LOST COMM (HVAC)

TM-450, "DTC Logic"

U0300

CAN COMM DATA 

TM-451, "DTC Logic"

U1000

CAN COMM CIRCUIT

TM-452, "DTC Logic"

U1117

LOST COMM (ABS)

TM-453, "DTC Logic"

2

P0740

TORQUE CONVERTER

TM-478, "DTC Logic"

P0743

TORQUE CONVERTER

TM-480, "DTC Logic"

P0778

PC SOLENOID B

TM-488, "DTC Logic"

P0779

PC SOLENOID B

TM-489, "DTC Logic"

P0962

PC SOLENOID A

TM-509, "DTC Logic"

P0963

PC SOLENOID A

TM-511, "DTC Logic"

P0966

PC SOLENOID B

TM-515, "DTC Logic"

P0967

PC SOLENOID B

TM-517, "DTC Logic"

P2814

SELECT SOLENOID

TM-528, "DTC Logic"

P2815

SELECT SOLENOID

TM-530, "DTC Logic"