|
|
BCS DIAGNOSIS SYSTEM (BCM) BCS-27 < SYSTEM DESCRIPTION > [WITH INTELLIGENT KEY SYSTEM] C D E F G H I J K L B A O P N *: Factory setting DATA MONITOR NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items. *: For models without panic alarm function, this item cannot be used. ACTIVE TEST FLASHER : CONSULT Function (BCM - FLASHER) (HALOGEN TYPE) INFOID:0000000012965030 WORK SUPPORT Service item Setting item Setting HAZARD ANSWER BACK Lock With locking only Sets the hazard warning lamp answer back function when Unlock Only With unlocking only Lock/ Unlock* With locking/unlocking Off Without the function Monitor item [Unit] Description REQ SW -DR Indicates [On/Off] condition of door request switch (driver side) REQ SW -AS Indicates [On/Off] condition of door request switch (passenger side) PUSH SW Indicates [On/Off] condition of push-button ignition switch TURN SIGNAL R Each switch status that BCM detects from the combination switch reading function TURN SIGNAL L HAZARD SW The switch status input from the hazard switch RKE-LOCK Indicates [On/Off] condition of LOCK signal from Intelligent Key RKE-UNLOCK Indicates [On/Off] condition of UNLOCK signal from Intelligent Key RKE-PANIC* Indicates [On/Off] condition of PANIC button of Intelligent Key Test item Operation Description FLASHER RH • Outputs voltage to turn the right side turn signal lamps ON to turn the turn signal indicator lamp (RH) ON LH • Outputs voltage to turn the left side turn signal lamps ON to turn the turn signal indicator lamp (LH) ON Off • Stops the voltage to turn the turn signal lamps OFF |