Nissan Tiida C11. Manual - part 652

 

  Главная      Nissan     Nissan Tiida C11 - Service Manual

 

поиск по сайту            

 

 

 

 

 

 

 

 

 

содержание   ..  650  651  652  653   ..

 

 

Nissan Tiida C11. Manual - part 652

 

 

EC-1258

< SYMPTOM DIAGNOSIS >

[K9K]

ENGINE DOES NOT START OR STARTS WITH DIFFICULTY

Is the inspection result normal?

YES

>> GO TO 10.

NO

>> Repair or replace air intake system. Refer to 

EM-269, "Removal and Installation"

10.

CHECK ELECTRIC THROTTLE CONTROL ACTUATOR

Check electric throttle control actuator. Refer to 

EC-1134, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 11.

NO

>> Repair or replace.

11.

CHECK LOW PRESSURE CIRCUIT

Perform the TEST 1: LOW PRESSURE CIRCUIT CHECK. Refer to 

EC-1043, "BASIC INSPECTION : Special

Repair Requirement (TEST 1: Low Pressure Fuel Supply System Check)"

.

>> GO TO 12.

12.

CHECK INTERNAL FUEL TRANSFER PUMP

Perform the TEST 2: INTERNAL FUEL TRANSFER PUMP CHECK. Refer to 

EC-1044, "BASIC INSPECTION

: Special Repair Requirement (TEST 2: Internal Fuel Transfer Pump Check)"

.

>> GO TO 13.

13.

CHECK HIGH PRESSURE SUPPLY PUMP (PRESSURE CONTROL VALVE)

Perform the TEST 3: HIGH PRESSURE SUPPLY PUMP (PRESSURE CONTROL VALVE). Refer to 

EC-1044,

"BASIC INSPECTION : Special Repair Requirement [TEST 3: High Pressure Supply Pump (Pressure Control
Valve) Check]"

.

>> GO TO 14.

14.

CHECK HIGH PRESSURE SUPPLY PUMP (VOLUMETRIC CONTROL VALVE)

Perform the TEST 4: HIGH PRESSURE SUPPLY PUMP (VOLUMETRIC CONTROL VALVE). Refer to 

EC-

1045, "BASIC INSPECTION : Special Repair Requirement [TEST 4: High Pressure Supply Pump (Volumetric
Control Valve) Check]"

.

>> GO TO 15.

15.

CHECK RAIL HIGH PRESSURE CONTROL CIRCUIT

Perform the TEST 5: RAIL HIGH PRESSURE CONTROL CIRCUIT CHECK. Refer to 

EC-1048, "BASIC

INSPECTION : Special Repair Requirement (TEST 5: Rail High Pressure Regulation Check)"

.

>> GO TO 16.

16.

CHECK MAJOR LEAK IN FUEL INJECTORS/FUEL INJECTORS OPEN

Perform the TEST 6: MAJOR LEAK IN FUEL INJECTOR/FUEL INJECTORS OPEN. Refer to 

EC-1052,

"BASIC INSPECTION : Special Repair Requirement (TEST 6: Major Leak in Fuel Injectors/Fuel Injectors
Open)"

.

>> GO TO 17.

17.

CHECK INCORRECT FUEL INJECTION QUANTITY

Perform the TEST 7: INCORRECT FUEL INJECTION QUANTITY. Refer to 

EC-1053, "BASIC INSPECTION :

Special Repair Requirement (TEST 7: Incorrect Fuel Injection Quantity)"

.

>> INSPECTION END

STARTING DIFFICULT WITH COLD ENGINE

EC-1259

< SYMPTOM DIAGNOSIS >

[K9K]

C

D

E

F

G

H

I

J

K

L

M

A

EC

N

P

O

STARTING DIFFICULT WITH COLD ENGINE

Description

INFOID:0000000001162703

CHART 3: STARTING DIFFICULT WITH COLD ENGINE

Diagnosis Procedure

INFOID:0000000001162704

1.

CHECK ENGINE OIL LEVEL

Is the engine oil level correct?

Yes or No

Yes

>> GO TO 2.

No

>> Top up the oil.

2.

CHECK ENGINE OIL 

Check the grade of engine oil. Refer to 

LU-26, "Inspection"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Replace engine oil. Refer to 

LU-27, "Refilling"

3.

CHECK BATTERY

Check the battery. Refer to 

PG-6, "Removal and Installation"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace battery. Refer to 

PG-6, "Removal and Installation"

4.

CHECK STARTER MOTOR

Check the starter motor. Refer to 

STR-35, "Removal and Installation"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace starter motor. Refer to 

STR-35, "Removal and Installation"

5.

CHECK COMPONENT PART

Check the following.
• Engine coolant temperature sensor. Refer to 

EC-1133, "Component Inspection"

.

• Fuel pump temperature sensor. Refer to 

EC-1137, "Component Inspection"

.

• Intake air temperature sensor. Refer to 

EC-1131, "Component Inspection"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace.

6.

CHECK GLOW SYSTEM

Check the glow system. Refer to 

EC-1156, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 7.

NO

>> Repair or replace glow system. Refer to 

EM-279, "Removal and Installation"

7.

CHECK LOW PRESSURE CIRCUIT

Perform the TEST 1: LOW PRESSURE CIRCUIT CHECK. Refer to 

EC-1043, "BASIC INSPECTION : Special

Repair Requirement (TEST 1: Low Pressure Fuel Supply System Check)"

.

>> GO TO 8.

8.

CHECK INTERNAL FUEL TRANSFER PUMP

Perform the TEST 2: INTERNAL FUEL TRANSFER PUMP CHECK. Refer to 

EC-1044, "BASIC INSPECTION

: Special Repair Requirement (TEST 2: Internal Fuel Transfer Pump Check)"

.

EC-1260

< SYMPTOM DIAGNOSIS >

[K9K]

STARTING DIFFICULT WITH COLD ENGINE

>> GO TO 9.

9.

CHECK COMPRESSION PRESSURE

Check the compression pressure. Refer to 

EM-267, "Inspection"

.

>> INSPECTION END

IMPOSSIBLE TO SHUT OFF ENGINE

EC-1261

< SYMPTOM DIAGNOSIS >

[K9K]

C

D

E

F

G

H

I

J

K

L

M

A

EC

N

P

O

IMPOSSIBLE TO SHUT OFF ENGINE

Description

INFOID:0000000001162705

CHART 4: IMPOSSIBLE TO SHUT OFF ENGINE

Diagnosis Procedure

INFOID:0000000001162706

1.

CHECK ECM POWER SUPPLY AND GROUND CIRCUIT

Check ECM power supply and ground circuit. Refer to 

EC-1106, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace harness or connector.

2.

CHECK WIRING HARNESS

Visually check the condition of the engine wiring harness.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Repair or replace harness or connector.

 

 

 

 

 

 

 

содержание   ..  650  651  652  653   ..