|
|
содержание .. 1347 1348 1349 1350 ..
SYSTEM SYMPTOM TM-447 < SYMPTOM DIAGNOSIS > [TYPE 2 (4AT: RE4F03B)] C E F G H I J K L M A B TM N O P 1. Remove oil pan. Refer to 2. Check A/T fluid condition. Refer to . OK or NG OK >> GO TO 7. NG >> GO TO 5. 7. CHECK SYMPTOM OK or NG OK >> INSPECTION END NG >> GO TO 8. 8. CHECK TCM 1. Check TCM input/output signals. Refer to TM-22, "Input/Output Signal of TCM" 2. If NG, recheck TCM pin terminals for damage or loose connection with harness connector. OK or NG OK >> INSPECTION END NG >> Repair or replace damaged parts. Vehicle Cannot Be Started from D 1 INFOID:0000000001714353 SYMPTOM: 1 on “Cruise Test — Part 1”. 1. CHECK SYMPTOM Check symptom. Refer to . Is “Vehicle Dose Not Creep Backward in “R” Position” OK? OK >> GO TO 2. NG >> GO TO TM-444, "Vehicle Does Not Creep Backward in "R" Position" . 2. CHECK SELF-DIAGNOSTIC RESULTS Perform self-diagnosis. Refer to XX-XX, "*****" or TM-38, "Diagnosis Procedure without CONSULT-III" . Is any malfunction detected by self-diagnostic results? YES >> Check the malfunctioning system. Refer to XX-XX, "*****" or XX-XX, "*****" . NO >> GO TO 3. 3. CHECK ACCELERATOR PEDAL POSITION SENSOR Check accelerator pedal position sensor. Refer to XX-XX, "*****" (type 1) or XX-XX, "*****" (type 2). OK or NG OK >> GO TO 4. NG >> Repair or replace accelerator pedal position sensor. 4. CHECK LINE PRESSURE Check line pressure at stall point with selector lever in “D” position. Refer to OK or NG OK >> GO TO 6. NG >> GO TO 5. 5. DETECT MALFUNCTIONING ITEM 1. Remove control valve assembly. Refer to TM-191, "Control Valve Assembly and Accumulators" 2. Check the following items: - Shift valve A - Shift valve B - Shift solenoid valve A - Shift solenoid valve B - Pilot valve - Pilot filter |