Content .. 110 111 112 113 ..

Mitsubishi Montero (1998+). Manual - part 112

specification .......... B .. Require repair or replacement.

Sensor housing cracked .. 2 ............ Suggest replacement.

Terminal broken ......... A .. Require repair or replacement.

Terminal burned, affecting

performance ............ A ........... ( 2) Require repair or

replacement.

Terminal burned, not

affecting performance .. 2 .. Suggest repair or replacement.

Terminal corroded,

affecting performance .. A .. Require repair or replacement.

Terminal corroded, not

affecting performance .. 2 .. Suggest repair or replacement.

Terminal loose, affecting

performance ............ B .. Require repair or replacement.

Terminal loose, not

affecting performance .. 1 .. Suggest repair or replacement.

Threads damaged ......... A .. Require repair or replacement.

Threads stripped (threads

missing) ............... A ............ Require replacement.

Wire lead conductors

exposed ................ B .. Require repair or replacement.

Wire lead corroded ...... A .. Require repair or replacement.

Wire lead misrouted ..... B .... Require re-routing according

to vehicle manufacturer’s

specifications.

Wire lead open .......... A .. Require repair or replacement.

Wire lead shorted ....... A .. Require repair or replacement.

(1) - If a sensor is not adjustable, further inspection is

required to identify and correct cause.

(2) - Determine cause and correct prior to repair or

replacement of part.

(3) - Determine source of contamination, such as metal particles

or water. Require repair or replacement.

(4) - Inoperative includes intermittent operation or out of OEM

specification. Some components may be serviceable;

check for accepted cleaning procedure.

SPEEDOMETER-DRIVEN GEAR HOUSINGS

See SPEEDOMETER/ODOMETER DRIVES (MECHANICAL).

SPEEDOMETER/ODOMETER DRIVES (MECHANICAL)

SPEEDOMETER/ODOMETER DRIVE (MECHANICAL) INSPECTION

Condition Code Procedure

Application incorrect ... B ............ Require replacement.

Attaching hardware

broken ................. A ... Require repair or replacement

of hardware.

Attaching hardware

missing ................ C .......... Require replacement of

hardware.

Attaching hardware not

functioning ............ A ... Require repair or replacement

of hardware.

Inoperative ............. A ........ (1) Require replacement.

Leaking ................. A .. Require repair or replacement.

Missing ................. C ............ Require replacement.

Teeth broken ............ A .. Require repair or replacement.

Threads damaged ......... A .. Require repair or replacement.

Threads stripped (threads

missing) ............... A ............ Require replacement.

Worn close to the end of

its useful life ........ 1 ............ Suggest replacement.

Worn, affecting

performance ............ A ............ Require replacement.

(1) - Inoperative includes intermittent operation.

SPEEDOMETER/ODOMETER HEADS (MECHANICAL)

SPEEDOMETER/ODOMETER HEAD (MECHANICAL) INSPECTION

Condition Code Procedure

Attaching hardware

broken ................. A ... Require repair or replacement

of hardware.

Attaching hardware

missing ................ C .......... Require replacement of

hardware.

Attaching hardware not

functioning ............ A ... Require repair or replacement

of hardware.

Lens broken ............. A ........... ( 1) Require repair or

replacement.

Lens cloudy ............. 2 ........... ( 1) Suggest repair or

replacement.

Lens missing ............ C ........... ( 1) Require repair or

replacement.

Malfunctioning .......... A ........... ( 2) Require repair or

replacement.

Noisy ................... 2 .. Suggest repair or replacement.

Threads damaged ......... A .. Require repair or replacement.

Threads stripped (threads

missing) ............... A ............ Require replacement.

(1) - If lens is available as a separate part, require

replacement of lens only.

(2) - Includes inoperative, intermittent operation, failure

to perform all functions, out of OEM specification, or

out of range.

SPEEDOMETERS AND ODOMETERS (ELECTRONIC)

SPEEDOMETER AND ODOMETER (ELECTRONIC) INSPECTION

Condition Code Procedure

Attaching hardware

broken ................. A ... Require repair or replacement

of hardware.

Attaching hardware

missing ................ C .......... Require replacement of

hardware.

Attaching hardware not

functioning ............ A ... Require repair or replacement

of hardware.

Connector broken ........ A .. Require repair or replacement.

Connector (Weatherpack

type) leaking .......... A .. Require repair or replacement.

Connector melted ........ A ........... ( 1) Require repair or

replacement.

Connector missing ....... C ............ Require replacement.

Leaking ................. A ............ Require replacement.

Lens broken ............. A ........... ( 2) Require repair or

replacement.

Lens cloudy ............. 2 ........... ( 2) Suggest repair or

replacement.

Lens missing ............ C ........... ( 2) Require repair or

replacement.

Malfunctioning .......... A ........... ( 3) Require repair or

replacement.

Mechanical head noisy ... 2 .. Suggest repair or replacement.

Terminal broken ......... A .. Require repair or replacement.

Terminal burned, affecting

performance ............ A ........... ( 1) Require repair or

replacement.

Terminal burned, not

affecting performance .. 2 .. Suggest repair or replacement.

Terminal corroded,

affecting performance .. A .. Require repair or replacement.

Terminal corroded, not

affecting performance .. 2 .. Suggest repair or replacement.

Terminal loose, affecting

performance ............ B .. Require repair or replacement.

Terminal loose, not

affecting performance .. 1 .. Suggest repair or replacement.

(1) - Determine cause and correct prior to repair or

replacement of part.

(2) - If lens is available as a separate part, require

replacement of lens only.

(3) - Includes inoperative, intermittent operation, failure

to perform all functions, out of OEM specification,

or out of range.

SWITCHES

SWITCH INSPECTION

Condition Code Procedure

Attaching hardware

broken ................. A ... Require repair or replacement

of hardware.

Attaching hardware

missing ................ C .......... Require replacement of

hardware.

Attaching hardware not

functioning ............ A ... Require repair or replacement

of hardware.

Binding, affecting

performance ............ A .. Require repair or replacement.

Binding, not affecting

performance ............ 2 .. Suggest repair or replacement.

Broken .................. A .. Require repair or replacement.

Burned, affecting

performance ............ A ........... ( 1) Require repair or

replacement.

Burned, not affecting

performance ............ 2 ........... ( 1) Suggest repair or

replacement.

Cracked, affecting

performance ............ A .. Require repair or replacement.

Cracked, not affecting

performance ............ 1 .. Suggest repair or replacement.

Leaking ................. A .. Require repair or replacement.

Malfunctioning .......... A ........... ( 2) Require repair or

replacement.

Melted, affecting

performance ............ A ........... ( 1) Require repair or

replacement.

Melted, not affecting

performance ............ 2 ........... ( 1) Suggest repair or

replacement.

Missing ................. C ............ Require replacement.

Out of adjustment ....... B .. Require repair or replacement.

Terminal broken ......... A .. Require repair or replacement.

Terminal burned, affecting

performance ............ A ........... ( 1) Require repair or

replacement.

Terminal burned, not

affecting performance .. 2 .. Suggest repair or replacement.

Terminal corroded,

affecting performance .. A .. Require repair or replacement.

Terminal corroded, not

affecting performance .. 2 .. Suggest repair or replacement.

Terminal loose, affecting

performance ............ B .. Require repair or replacement.

Terminal loose, not

affecting performance .. 1 .. Suggest repair or replacement.

Won’t return ............ A .. Require repair or replacement.

Worn .................... 1 ............ Suggest replacement.

(1) - Determine cause and correct prior to repair or

replacement of part.

(2) - Includes inoperative, intermittent operation, or

failure to perform all functions.

TONE WHEELS

See TOOTHED RINGS (TONE WHEELS).

TOOTHED RINGS (TONE WHEELS)

If the toothed ring requires replacement and cannot be

replaced as a separate component, replace the assembly of which the

ring is a part.

TOOTHED RING (TONE WHEEL) INSPECTION

Condition Code Procedure

Alignment incorrect ..... B .. Require repair or replacement.

Bent .................... B ............ Require replacement.

Contaminated, affecting

performance ............ A .... Require repair. Identify and

correct cause.

Cracked ................. B ............ Require replacement.

Loose ................... A ..... Require replacement of worn

parts.

Missing ................. C ............ Require replacement.

Number of teeth

Content .. 110 111 112 113 ..