Mitsubishi Montero (1998+). Manual - part 110

 

  Index      Mitsubishi     Mitsubishi Montero - service repair manual 1998 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  108  109  110  111   ..

 

 

Mitsubishi Montero (1998+). Manual - part 110

 

 

Application incorrect  ...  B  ............  Require replacement.

Connected incorrectly  ...  A  .................  Require repair.

Corroded, not reusable  ..  1  ............  Suggest replacement.

Cracked  .................  A  ............  Require replacement.

Dry-rotted  ..............  1  ..  Suggest repair or replacement.

Hard  ....................  1  ..  Suggest repair or replacement.

Inner fabric (webbing)

 damaged  ................  A  ............  Require replacement.

Insufficient clamping

 force, allowing hose to

 leak  ...................  A  ..  Require repair or replacement.

Leaking  .................  A  ..  Require repair or replacement.

Maintenance intervals  ...  3  ............  Suggest replacement.

Melted  ..................  1  ..  Suggest repair or replacement.

Missing  .................  C  ............  Require replacement.

Outer covering damaged  ..  1  ............  Suggest replacement.

Outer covering damaged to

 the extent that the inner

 fabric is visible  ......  A  ............  Require replacement.

Protective sleeves

 damaged  ................  2  .  Suggest replacement of sleeves.

Protective sleeves

 missing  ................  2  .  Suggest replacement of sleeves.

Restricted, affecting

 performance  ............  A  ..  Require repair or replacement.

Restricted, not affecting

 performance  ............  2  ..  Suggest repair or replacement.

Routed incorrectly  ......  2  ............  Suggest replacement.

Safety clip missing  .....  C  ............  Require replacement.

Spongy  ..................  1  ..  Suggest repair or replacement.

Stripped  ................  A  ............  Require replacement.

Swollen  .................  B  ............  Require replacement.

Threads damaged  .........  A  ..  Require repair or replacement.

Threads stripped (threads

 missing)  ...............  A  ............  Require replacement.

Type incorrect  ..........  1  ..  Suggest repair or replacement.



         HOUSINGS (BELL, CASE, TAIL (EXTENSION) AND AUXILIARY)

HOUSING (BELL, CASE, TAIL (EXTENSION) AND AUXILIARY) INSPECTION



Condition                 Code                          Procedure

Bearing race loose

 in bore  ................  A  ..  Require repair or replacement.

Broken, affecting

 performance  ............  A  ..  Require repair or replacement.

Cracked  .................  A  ..  Require repair or replacement.

Dowel pin holes worn,

 affecting performance  ..  A  ...........  ( 1) Require repair or

                                                     replacement.

Machined surfaces damaged,

 affecting performance  ..  A  ..  Require repair or replacement.

Threads damaged  .........  A  ..  Require repair or replacement.

Threads stripped (threads

 missing)  ...............  A  ............  Require replacement.

Worn, affecting

 performance  ............  A  ..  Require repair or replacement.

(1) - See DOWEL PINS, GUIDES AND PILOT HOLES.



         INTERMEDIATE SHAFT SUPPORT BEARINGS

INTERMEDIATE SHAFT SUPPORT BEARING INSPECTION



Condition                 Code                          Procedure

Attaching hardware

 broken  .................  A  ...  Require repair or replacement

                                                     of hardware.

Attaching hardware

 missing  ................  C  ..........  Require replacement of

                                                        hardware.

Attaching hardware not

 functioning  ............  A  ...  Require repair or replacement

                                                     of hardware.

Bearing rollers, balls or

 races are worn, pitted,

 noisy, or feel rough when

 rotated as an assembly  .  A  ..  Require replacement of bearing

                                                        assembly.

Bracket bent, affecting

 performance  ............  A  ..  Require repair or replacement.

Bracket bent, not

 affecting performance  ..  ..  ........  No service suggested or

                                                        required.

Bracket broken, affecting

 performance  ............  A  ............  Require replacement.

Bracket broken, not

 affecting performance  ..  ..  ........  No service suggested or

                                                        required.

Bracket corroded,

 affecting performance  ..  A  ..  Require repair or replacement.

Bracket corroded, not

 affecting performance  ..  2  ..  Suggest repair or replacement.

Bracket cracked, affecting

 performance  ............  A  ..  Require repair or replacement.

Bracket cracked, not

 affecting performance  ..  1  ..  Suggest repair or replacement.

Bracket holes elongated,

 affecting performance  ..  A  ..  Require repair or replacement.

Bracket holes elongated,

 not affecting

 performances)  ..........  ..  ........  No service suggested or

                                                        required.

Bracket loose, affecting

 performance  ............  A  ..  Require repair or replacement.

Bracket loose, not

 affecting performance  ..  1  ..  Suggest repair or replacement.

Bracket missing  .........  C  ............  Require replacement.

Cracked  .................  ..  ...........  Require replacement.

Rough (brinelling,

 spalling)  ..............  A  ............  Require replacement.

Rubber deteriorated,

 affecting performance  ..  A  ............  Require replacement.

Seized  ..................  A  ............  Require replacement.



         KEY INTERLOCK SYSTEMS

         See

SHIFT INTERLOCK SYSTEMS (SELECTOR AND KEY INTERLOCK SYSTEMS) .

         LIMITED SLIPS

         See DIFFERENTIAL AND FINAL DRIVE ASSEMBLIES.

         LINES

         See HOSES, LINES AND TUBES.

         LINKAGES (EXTERNAL)

LINKAGE (EXTERNAL) INSPECTION



Condition                 Code                          Procedure

Components missing  ......  C  ..  Require replacement of missing

                                                      components.

Linkage bent, affecting

 performance  ............  A  ...  Require repair or replacement

                                                      of linkage.

Linkage bent, not

 affecting performance  ..  2  ...  Suggest repair or replacement

                                                      of linkage.

Linkage binding, affecting

 performance  ............  A  ...  Require repair or replacement

                                                      of linkage.

Linkage binding, not

 affecting performance  ..  1  ...  Suggest repair or replacement

                                                      of linkage.

Linkage broken  ..........  A  ...  Require repair or replacement

                                                      of linkage.

Linkage loose, affecting

 performance  ............  A  ...  Require repair or replacement

                                                      of linkage.

Linkage loose, not

 affecting performance  ..  1  ...  Suggest repair or replacement

                                                      of linkage.

Linkage missing  .........  C  ............  Require replacement.

Linkage noisy  ...........  2  ..  Suggest repair or replacement.

Out of adjustment  .......  B  ..  Require repair or replacement.

Worn to the extent that it

 no longer performs its

 intended function  ......  A  ..  Require repair or replacement.



         LOCKING HUB ASSEMBLIES

LOCKING HUB ASSEMBLY INSPECTION



Condition                 Code                          Procedure

Inoperative  .............  A  ...........  ( 1) Require repair or

                                                     replacement.

Loose  ...................  A  ..  Require repair or replacement.

Seized in any position  ..  A  ..  Require repair or replacement.

(1) - Inoperative includes intermittent operation.



         LOCKING HUB CONTROL KNOBS

LOCKING HUB CONTROL KNOB INSPECTION



Condition                 Code                          Procedure

Damaged, affecting

 performance  ............  A  ............  Require replacement.

Missing  .................  C  ............  Require replacement.

Worn, affecting

 performance  ............  A  ............  Require replacement.



         LUBRICANTS

         See FLUIDS AND LUBRICANTS.

         METAL-CLAD SEALS

         See SEALS.

         METALASTIC JOINTS

         See RUBBER JOINTS (METALASTIC).

         MODULATOR PINS

MODULATOR PIN INSPECTION



Condition                 Code                          Procedure

Application incorrect  ...  B  ............  Require replacement.

Missing  .................  C  ............  Require replacement.



         MODULATORS

MODULATOR INSPECTION



Condition                 Code                          Procedure

Bent, affecting

 performance  ............  A  ............  Require replacement.

Contaminated (water, fuel,

 etc.)  ..................  A  ........  (1) Require replacement.

Housing cracked  .........  A  ............  Require replacement.

Inoperative  .............  A  ........  (2) Require replacement.

Leaking fluid

 externally  .............  A  ..  Require repair or replacement.

Leaking fluid

 internally  .............  A  ............  Require replacement.

Leaking vacuum  ..........  A  ............  Require replacement.

Nipple broken  ...........  A  ............  Require replacement.

Threads damaged  .........  A  ..  Require repair or replacement.

Threads stripped (threads

 missing)  ...............  A  ............  Require replacement.

(1) - Further inspection is required to determine the cause

      of the contamination.

(2) - Inoperative includes intermittent operation or out of OEM

      specification.



         MOUNTS (ENGINE, TRANSAXLE AND TRANSMISSION)

MOUNT (ENGINE, TRANSAXLE AND TRANSMISSION) INSPECTION



 

 

 

 

 

 

 

Content   ..  108  109  110  111   ..